CERTAIN REPAIRS TO FENCING COMPOUND WALL OR GATES AND OTHER MISC BR WORKS AT PANGODE MILITARY STATION UNDER GE ARMY TRIVANDRUM

Amount

Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work/stone/PPC block masonry built in cement mortar and removing the debris/rubbish to a distance n.exc 100m etc complete all as specified and directed

M&L for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 in double layer (5 + 10 mm) mixed with water proofing compound on fair faces of concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed. Note: Water proofing compound will be measured and paid seperately

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement etc complete all as specified and directed.

Supply only Liquid water proofing compound.

M&L for Applying two coat of acrylic exterior emulsion anti fungal painting over a coat of primer including prepartion of surfaces of wall (up to four storey bldg) as per manufactures instructions etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary formwork etc complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion, posts embedded in natural ground or lean concrete etc and making good disturbed portion, complete all as specified and directed

Demolition of cement concrete of any description in any position not otherwise specially provided for etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2(using 40mm graded broken stone agg) as in foundation, filling mass concrete etc complete all as specified and directed.

M&L For Providing reinforced cement concrete 1:2:4 Type B1,(using 20 mm graded aggregate), in pre-cast fencing posts, struts etc average sectional area exceeding 100 Sqcm and not exc 250 Sqcm with or without chamfered angle and flat etc complete all as specified and directed.

Dismantling of existing rusted wire / barbed wire from posts, struts etc complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacings and staining and fixing to RCC post including tying or securing at crossings with and provision of galvanised mild steel wire, staples, steel pins etc complete all as specified and directed (each line wire to be measured).

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

All as per item No 15 here-in-before but 5 mm to 8 mm dia for stirrups, spacers & binders

Dismantling structural steel work including doors, gates, chain link fencing and similar work etc complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed.

S&F Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred etc complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enemel paint over a coat of redoxide zinc chrome primer etc complete all as specified and directed.

AKASH CONSTRUCTIONS

JESWIN BUILDERS

SHILPA ENGINEERS AND CONTRACTORS