Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-AOC PLOT NO 60 BEHIND SETU KENDRA JAWAHAR NAGAR PETROL PUMP BHANDARA 441906 | BHANDARA | MAHARASHTRA | 441906 | L1 | Accepted-AOC As per CWC decision | |
| 2 | L2₹3.5 L+₹40,325.50 (12.8%)Rejected-AOC NO 1 385 KATTUKOTTAI PAITHUR POST ATTUR TALUK SALEM DISTRICT 636401 | ATTUR | SALEM | TAMIL NADU | 636401 | L2 | Rejected-AOC - | |
| 3 | L3₹3.7 L+₹55,338.50 (17.6%)Rejected-AOC | L3 | Rejected-AOC - | |
| 4 | L4₹4.0 L+₹85,839.50 (27.3%)Rejected-AOC | L4 | Rejected-AOC - |
Tender Value
₹3.5 L
EMD Value
₹6,946
Closing Date
5 Feb 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE GENERAL MANAGER, CORDITE FACTORY ARUVANKADU
THE GENERAL MANAGER, CORDITE FACTORY ARUVANKADU,THE NILGIRIS-DT,643202-PIN
REPAIRS TO VERANDA ROOF OF BLDG NO.272 (IB) AND MINOR WORKS, HARD STANDING TO IB AREA OF CORDITE FACTORY ESTATE
2024_MIL_182546_1
TE/CFA/23/EO/CIVIL/2023-24
Open Tender
Civil Works
Item Rate
84 days
ARUVANKADU
As per NIT
4 documents required · 4 mandatory
₹0
₹6,946
Yes
13 Mar 2024
20 Jan 2024
6 Feb 2024
20 Jan 2024
5 Feb 2024
20 Jan 2024
20 Jan 2024 - 5 Feb 2024
Amount
Demolition of Brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, as directed.
Surface excavation averaging 30cm deep and getting out in hard dense soil as directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete, 1:3:6, set in CM 1:4 as directed.
M&L for Rendering 12mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 as directed.
M&L for providing Cement concrete type D-2, 1:4:8 (40mm graded aggregate)100mm thick.
M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less as directed.
M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, (Thickness of concrete 200mm)as directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed
M&L for Roof treatement by following method:- (a). Surface preparation: Cleaning the surface well including cleaning mosses, wild growth etc and cleaning with wire brush or grinder to level the uneven surface and sharp points, wash the slab to remove dust, dirt, oil, grease etc, , cut and open all concrete cracks which are more than 0.50mm in the width and upto 10mm and filling the crack with cement mortar mixed with modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC). (b). Fillet Treatment: Providing and laying of 50mm X 50mm angle fillets at the junction of slab and vertical walls prepared with cement sand mortar in the ratio of 1:3 admixed with 10% modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC) by weight of cement. (c). Water Proof Coating: Providing and applying one coat of Water based primer composed of Acrylic emulsion polymer (Dr. Fixit Prime Seal or Equivalent as approved by EIC) and 02 coats of Single component cold applied Elastomeric water proof coating (Dr.Fixit Roof Seal or Equivalent as approved by EIC) with sandwiching 45 GSM geo textile with a time interval of 04 to 06 hours and extending the coat to the vertical surface if any (parapet / Concrete edge sides) as per manufacturer instruction. (d). work should carried out by the OEM authorised applicator / Dealer as approved by EIC.
DURAISAMY&CO
RAVIKUMAR
M/S M SUNDARARAJAN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .