Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.8 L
EMD Value
₹19,500
Closing Date
10 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Col Siddharth Sharma CWE NW Kochi
HQ CWE NW Kochi
SPECIAL REPAIRS TO ARJUN BLOCK (BLOCK NO. P-143) AT SNC(O) MESS, NAVAL BASE, KOCHI
2026_MES_799391_1
CWE(NW)KOCHI/81718
Open Tender
Civil Works
Item Rate
120 days
GE NW KOCHI
As per NIT
7 documents required · 7 mandatory
₹500
GE NW KOCHI
₹19,500
Yes
19 Nov 2026
19 Nov 2026
12 Dec 2026
19 Nov 2026
10 Dec 2026
3 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down tar felt (water proofing treatement) on roof slab incl cleaning the surface using wire brushes and air blowers to remove dust, dirt and loose mortar splatters, oil and debris and removing tar felt material and other materials disposing to a distance of exc 250m not exc 500 m complete all as specified | 1,092 | Sqm | - | - |
| 2 | M&L screed bed or bedding layer of mortar 15mm in CM 1:3 (using WPC) laid over roof surface with a minimum slope of 1:100 towards the drain outlets to prevent water logging etc complete all as specified and directed. | 1,092 | Sqm | - | - |
| 3 | Supply only water proofing compound (Liquid) complete all as specified and as directed. | 51.5 | Litre | - | - |
| 4 | M& L for water proofing treatment in five course and shall be carried out as follows:- (i) Provide 75 mm x75 mm smooth cement mortar coving (chamfer) at all vertical joints (parapet, wall, equipment bases, columnsetc) to avoid sharp 90 degree bend in the membrane. (ii) Apply a uniform coat of solvent based or water based cold bituminous primer @ 0.20 to 0.30 litre /square metre on the prepared surface. (iii) Apply a coat of blow type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (iv) Provide and lay 4mm thick APP modified torch-on, applied bituminous membrane weighing not less than 4 Kg per square metre reinforced with non- woven polyester felt, weighing not less than 160 gm/Sqm having softening point less than 1400C, Longitudinal tensile strength not less than 600 N/50MM, tear strength of 180N(Min), a static puncture resistance of 180, keeping a minimum of 15 cm over laps at sides and end lap. (v) Apply a coat of blown type bitumen grade 85/25 conforming to IS :702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square meter of the surface area. (vi) Finishing surface with solar reflective bituminous aluminum paint @ 100 gm/Sqm. | 1,092 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tenderdocus1.pdf
Tender Documents • 1.27 MB
BOQ_896885.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .