Construction of New CR Bldg. (7+3 Span), Cable Trench, Compound wall, RCC Road, Rainwater Drain with Sump & Misc. Civil Works at 66 KV Colony Porbandar SS under AM Division Ranavav under Jamnagar Circle.

Name of Work :- '"Construction of New CR Bldg (7+3 Span), Cable Trench, C'wall, RCC Road, Rain Water Drain with

Sump & Misc. Civil Works at 66 KV Colony Porbandar SS under AM Division Ranavav under Jamnagar Circle."

Description Unit Rate Amount

[A] DEMOLITION & DISMENTELING

1 Demolition of brick work and stone masonry

including stacking of serviceable materials and

disposal of unserviceable materials with all lead

2 Demolition of R.C.C. work including stacking of

serviceable materials and disposal of unserviceable 32.00 CMT 1123.00

materials with all lead and lift.

[B] EXCAVATION, FILLING AND EARTH WORK

3 Excavation for foundation up to 1.50 m Depth

including sorting out and stacking of useful

materials & Refilling the sides of the trenches and 8.00 CMT 270.00

disposing of the excavated stuff up to any lead -

Dense or Hard soil (Manually)

4 Excavation for foundation up to 1.50 m Depth

including sorting out and stacking of useful

materials & Refilling the sides of the trenches and 135.00 CMT 461.00

disposing of the excavated stuff up to any lead -

Hard Murrum (Manually)

5 Excavation for foundation up to 1.50 m Depth

including sorting out and stacking of useful

materials & Refilling the sides of the trenches and 78.00 CMT 553.00

disposing of the excavated stuff up to any lead -

Soft Rock (Manually)

6 Excavation for foundation up to 1.50 m Depth

including sorting out and stacking of useful

materials & Refilling the sides of the trenches and 78.00 CMT 1031.00

disposing of the excavated stuff up to any lead -

Hard Rock (Manually)

7 Excavation for foundation from 1.50 m to 3.00 m

Depth including sorting out and stacking of useful

materials & Refilling the sides of the trenches and 10.00 CMT 1071.00

disposing of the excavated stuff up to any lead -

Hard Rock (Manually)

8 Filling in plinth/trenches & yard with excavated

earth in layers not exceeding 200 mm, thick layers

including watering, ramming, consolidating etc.,

complete as directed by EIC. - Excavated earth 27.00 CMT 136.00

from foundation. The item rate includes all leads &

9 Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. Thickness including

watering, ramming and consolidating etc. complete

as directed by EIC - Approved quality murrum and

selected soil brought from outside with all lead and

10 Filling in plinth/trenches with Sand under floor

including spreading, watering, ramming,

consolidating etc., complete as directed by EIC. -

The item rate includes all leads & lifts.

[C] CONSTRUCTION

(1) MASONARY WORK

11 Providing & laying White stone bela masonary

(including quoin blocks, jamb blocks closer etc.)

with White Stone Bela of approved size in

foundation and plinth with cement mortar 1:6

12 Providing & laying White stone bela masonary

(including quoin blocks, jamb blocks closer etc.)

with White Stone Bela of approved size for Super 101.00 CMT 6459.00

Structure G.F+F.F+Stair Cabin with cement mortar

13 Half Brick masonry in common burnt clay building

bricks having crushing strength not less than

kg/Sq.m in cement mortar 1:4(1 cement & 4 coarse 40.00 SMT 642.00

sand) up to plinth & two floors G.F+F.F+Stair Cabin.

- Conventional Bricks

(2) CONCRETE WORK

14 Providing and laying cement concrete 1:4:8 (1

Cement : 4 Coarse and : 8 black crushed stone

aggregate 40mm nominal size ) and curing

complete- Foundation and plinth.

15 Providing PLY WOOD form work shuttering so as to

give a smooth exposed finish including centering

(adjustable tubular steel supports). Shuttering

strutting and propping etc. for any height of

propping and centering below supporting floor to

ceiling , and removal of the same for reinforced

concrete and plain concrete. for Footings

foundations and pedestal

16 Providing & laying control cement concrete M-20

as per mix design exposed work with curing etc.

complete Excluding the cost of ply wood

shuttering form work & adjustable tubular steel 73.00 CMT 4117.00

supports / Props. & the cost of reinforcement. For

foundation Footing, base of column ,mass

17 Providing & laying control cement concrete M-20

as per mix design exposed work with curing etc.

complete including the cost of ply wood form

work & adjustable tubular steel supports / Props.

but excluding the cost of reinforcement.G.F+FF &

Staircasse -For Columns

18 Providing & laying control cement concrete M-20

as per mix design exposed work with curing etc.

complete including the cost of ply wood form

work & adjustable tubular steel supports / Props. 4.00 CMT 7911.00

but excluding the cost of reinforcement.G.F+FF &

Staircasse -For Beams

19 Providing & laying control cement concrete M-20

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of 7.00 CMT 8130.00

reinforcement For.G.F+FF & Staircasse -for Sill,

Lintel, Chajja, Slab, Coping, other cantilever

20 Providing & laying control cement concrete M-20

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse - for

vertical walls.

21 Providing & laying control cement concrete M-30

as per mix design exposed work with curing etc.

complete Excluding the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. & the cost of reinforcement. For

foundation Footing, base of column ,mass

22 Providing & laying control cement concrete M-30

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of

reinforcement. For.G.F+FF & Staircasse -For

23 Providing & laying control cement concrete M-30

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel 45.00 CMT 9715.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse - Beams,

24 Providing & laying control cement concrete M-30

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse -for Sill,

Lintel, Chajja, Slab, Coping, other cantilever

25 Providing & laying control cement concrete M-30

as per mix design exposed work with curing etc.

complete including the cost of ply wood

shuttering form work & adjustable tubular steel 23.00 CMT 9644.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse - for

vertical walls.

26 Supply, Installation and fixing in position of Fuji

silvetrech or its equivalent make Precast RCC Cable

trench having size of 600 mm wide and 600 mm

depth thickness of wall 65 mm at top and top PSC

cover. RCC cable trench & cover provided as per

drawing, manufactured with self compacted

concrete, rate included, jointing with GP2 or it's

equivelent griuting mortar, drilling hole when as

required for cable passing with core cuttuer with

top PSC cover, RCC cable trench, Fixing as per

instruction of engineer in charge. Precast U (600 X

600 )Shape Drain T 6 for (11kv Power Cable

Trench). Width and Depth of each section for

required quantities shall be as per below table. The 288.00 RMT 5121.00

product should be meeting BIS requirements..

Product shall have load carrying capacity -

Tonnes made by using advanced precast

technology having High Performance Self

Compacting Concrete of M50 grade and Fe 500 D

grade TMT steel reinforcement bar. The product

shall have tie shape groove of 10-20 mm width X

25 mm depth on both sides of each precast unit

product for jointing two precast units. The Precast

U Shape drain should have special in built insert at

appropriate location for fixing De-Shackle for

mechanical installation, including supply,

transportation at site.

27 Providing & Fixing in position as per approved

drawing corrosion resistant steel reinforcemnet

bars FE500/500D confirmong to IS 1786 in RCC

work including Cutting,bending, binding with

gauge annealed wire, of bars as per IS

requirenment If necessary and placing in position

etc. completed for RCC work. etc completed as

directed by EIC.

(3) PLASTER WORK

28 Providing 15mm thick smooth/Sand face cement

plaster on walls in single coat on fare side

masonary/bela/concrete wall/ceiling up to any 1159.00 SMT 187.00

height and finished even and smooth in C.M. 1:3 (1

cement : 3 sand) etc. complete.

29 Providing 15mm thick cement plaster single coat

on masonary / bela / concrete wall / ceiling for

plastering up to any floor level finished even and 64.00 SMT 240.00

smooth in cement mortar 1:3 (1 Cement : 3 sand)

finished with floating coat of neat cement slurry.

30 Providing 20mm thick sand face cement plaster on

wall up to height 10 meters above ground level

consisting of 12mm thick backing coat of C.M. 1:3 781.00 SMT 327.00

(1 cement : 3 sand) and 8mm thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) etc. complete.

31 Providing & fixing 18 gauge wire mesh jali having

width 200 to 300 mm with nails before finishing

the surface with plaster. The item includes

providing necessary scaffolding also)

32 Providing cement vata (10cmx10cm size) quarter

round in cement mortar 1:1 including neat cement 171.00 RMT 24.00

finishing watering etc. complete.

33 Providing and fixing 600 mm dia cross spire razor

type GI concertina coil on wall upto 03m height

with providing and fixing GI angle 50x50x6 mm

PLUS '+' shaped placed at approx. 3.00 m apart

including painting and with P& F 04 no. of 305.00 RMT 693.00

horizontal R.B.T. reinforced barbed wire, stud tied

with G.I. staples and G.I.clips to retain horizontal,

etc complete as per manufactures specification

and as per direction of engineer-in-charge.

34 Providing Applying two coats of Birla or Asian

actrylic lappy (putty) and two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

35 Providing distempering (two coats) with oil bound

distemper of approved brand and manufacture and

of required shade on undercoated wall surface to

give an even shade over and including a priming

coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface

free from mortar droppings and other foreign

matter and also including preparing the surface

even and sand papered smooth.

36 Providing and Applying 1(One) Coat of SMARTCARE

PRIMERO and 2(two) coats of APOCOLITE APEX

plastic emulsion paint or its equivalent Wall

painting of approved brand and manufacture And

GETCO Approved Shade on undercoated wall

surface to give an even shade. The work included 1150.00 SMT 121.00

thoroughly brushing/cleaning the surface free

from mortar droppings and other foreign matter

and also including preparing the surface even and

smooth by sand paper or any other approved

37 Providing & applying 3 coats of ACID/ALKALI

resisting paint of approved shade & make to wall,

ceiling including filling putty smoothing the 51.00 SMT 131.00

surfaces scaffolding etc. complete as directed by

38 Providing and laying approved quality polished

Kotah stone slab(25mm th. and 600mm x 600mm

in size) flooring including using 35x25mm

approved quality machine cut, marble strip over

20mm (average) thick base of cement mortar 1:6 (1

cement : 6 course sand or L.M. 1:1.5 laid over and

jointed with grey cement slurry including rubbing

and mirror polishing using polishing machine with

grinding six emery's of different no. including using 257.00 SMT 1129.00

special chemical powder for polishing including

white cement coating two times during polishing

for filling up minute holes or cracks in joints etc.

complete. The item rate includes the removing the

existing flooring including base concrete, throwing

the stuff as & where directed upto any lead. Etc.

complete as directed by E.I.C. The waste material

will be property of contractor.

39 Providing and laying polished Kota stone slab

mm th. in risers of steps, Dedo and sills laid on

mm thick CM 1:3 & jointed with grey cement slurry

including rubbing and polishing etc. complete.

40 Providing and laying 24"x24" Vitrified 8 to 10 mm

thick tiles (600mm x 600mm) -JOHNSON / KAJARIA

/ NITTCO / SIMPOLO or its equivalent make

flooring over 20mm(Average) base of Cement

Mortar 1:6 (1-Cement : 6 Coarse Sand) on new

surface or fixing on existing flooring by adhesive 25.00 SMT 1109.00

materials and also for skirting and dedo on 10mm

thick cement plaster in 1:3 including dismentalling

of existing flooring and jointed with colour cement

slurry including finished with flush pointing &

cleaning the surface etc complete for light shade

41 Providing and laying color glazed tiles -JOHNSON /

KAJARIA / NITTCO / SIMPOLO or its equivalent make

8 to 10 mm thick in flooring & Dedo laid on bed of

12mm thick cement mortar 1:3 (1 cement : 3 course

sand) & fixing the same in cement & providing 68.00 SMT 1544.00

12mm thick back coating of cement plaster in CM

1:3 for base, filling the joints with white/color

cement neatly finishing the joints curing etc.

(6) DOORS AND WINDOWS

42 Providing and fixing fully glazed / partly glazed

double leaf 20 micron thick colour anodized

aluminium door with following listed extruded

section manufactured by Jindal luminium Ltd. &

other accessories,the Alluminium sections are of

HE9WP Group: (1) with door outer frame section of

63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/Rmt

(J4605) (2) Door shutter vertical style (meeting

style) of 53.7 x 44.45 x 2.30mm thickness (J4537)

weighing 1.238 Kg/m (3) Hinge side 53.7 x 44.45 x

2.30mm thickness (J4540) weighing 1.173 Kg/Rmt

(4) Bottom rail of size 150 x 44.45 x

2.40mmthickness (J4538) weighing 2.376 Kg/Rmt

(5) Lock rail of size 83.5 x 44.45 x 2.40mm thickness

(J4549) weighing 1.679 Kg/Rmt (6) Top rail of size

47.62 x 44.45 x 3.18mm thickness (J4506) weighing

1.501 Kg/Rmt (7) Ventilator middle member (if

required) 49.91 x 44.45 x 3.00mm thickness (J4621)

weighing 1.495 Kg/ Rmt (8) Aluminium handle

127.00 x 37 x 3.65mm thickness (J4483) weighing

1.912 Kg/No. (9) Tower bolt 250mm long (J4954)

(10) Aluminium bending mortice lock (J4420) (11)

Top panel using 6.0mm thick Triveni or Modi or

Saint Gobain make float glass fixed with PVC Clear

gasket (12) Bottom panel using 4mm thick exterior

aluminium sheet board of make approved by the

Engineer - in - Charge (for partly glazed door) fixed

with virgin PVC clear gasket (13) Hydraulic floor

mounted spring godrej or equivalent of make

approved by the Engineer - in – Charge. with all

other required fixtures and fastening of colour

anodized with aluminium beading, with all labours

and materials etc. complete as directed by EIC.

Aluminium section user for fixing hinges, door

closer, etc. shall be filled with country teak wood to

receive screws.

43 Providing and fixing window having extruded

aluminium 20micron thick colour anodized section

frame main outer size 63.50x38.10x1.95mm (of Jindal

Section no:4605, @ wt 1.094Kg/Rmt), horizontal two

track member size 61.85mm x 31.75mm x 1.20mm(of

Jindal Section mo: 8687 @ wt of 0.695 Kg/mt), vertical

member of size 61.85mm x 31.75mm x1.30mm(of Jindal

section no: 8758 @ wt of 0.659 Kg /mt) with Sliding

Shutters of horizontal member Size 40mm x 18mm x

1.29mm(of Jindal section no: 8949 @ wt of 0.456Kf/mt),

vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Sectio: 8947 @ wt 0.457 Kg/mt, section 8948 @

0.457kG/mt) with 5 mm thick transparent bronze

colour/white tinted float glass with aluminium fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for Window.

44 Providing and fixing approved quality 20micron thick

color anodised aluminum ventilator having frame size

63x38.10 mm having thickness 1.20mm & weighing

0.643 kg/rmt approx standard aluminum extruded 2.00 SMT 1164.00

anodized frame having panel of 5mm thick white/brown

glass fixed horizontal louvers in aluminum channel as per

details drawings.

45 Providing & fixing approved quality FRP door having

FRP frame of size 100x50mm & 28mm thick FRP

shutter with Depressed Panel shutter having extra

reinforcement on side and edges and in Gel coat

finish. The core of the shutter is to be filled up with

injected fiber extinguishing grade polyurethane

foam done in situ along with embedded wooden

pieces for stiffening and also for fixing hinges and

fixtures. The whole FRP frame and shutter is to be

water proof, weather proof, termite proof and

resistance to mild acid/Alkali resistance including SS

hinges with necessary screws and aluminum fixture

and fastenings etc complete. 28mm th. shutter &

100x50mm frame.

(7) FABRICATION ITEMS

46 Providing and fixing approved quality rolling

shutters of approved make and made with crane

handle as per IS 6248 -1979 having 18 gauge sheet

thickness and 80mm wide M.S. Laths interlocked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates

guide channels and arrangements for inside locking 12.00 SMT 5339.00

with push pull operation complete including the

cost of hood cover with one coat of red oxide primer

followed by 3 coats of oil painting of approved

shade & tint etc complete as directed by E.I.C (The

measurment shall be paid for wall opening plus

drum only) (A) Shutter having width below

47 Providing & fixing MS Grill of approved quality &

design weighing 25 to 30 kg/smt as per drawing & 286.00 KG 113.00

as directed with necessary grill door (if required)

including welding or bolted fixtures and fastening.

etc. with 3 coats of oil painting of approved shade &

tint with one coat of red oxide primer including

grouted hold fast in CC (1:2:4) etc. complete as

directed by EIC.

48 Providing and fabricating and placing approved

quality steel work welded Hot dip galvanizing as per

IS-2633/72 & 209 of 1966 or latest amendment, etc

complete in built up sections, framed work including

cutting, hoisting, fixing in position and applying a 900.00 KG 107.00

priming coat of red lead paint :-(A) In beams and

joints channels angles, tees, flats with connecting

cleats as in main and cross beams, hip and jack

rafters, purloins connected to common rafters etc.

49 Supply, fabrication,cutting,threading of M.S rod

including hot dip galvanizing the same of required

size and length including 2 Nos of hex nuts with

check nut, lock nut, plain washer,spring washer, 112.00 KG 102.00

base plate 65X10 thick stopper pit welded at end.

etc; complete as directed by E.I.C (Revised Basic

rate+Transportation Charges as per RA)

50 Setting of template & foundation bolts in line and

level before concreting of foundation and making

arrangement of fixing template in such a way as it

remains in position during concrete etc. comp. As

directed by EIC. Note:The rate includes supplying

and setting both.

51 Providing and fixing approved quality Sliding/Hinge

gate of 40mm dia mild steel pipe B class all round

and 20mm dia Mild steel pipe at 200mm C/C and

12mm mild steel square bars at 200mm C/C

alternatively (I.e. One between two pipes) vertically

welded to 40mm dia pipe frame as per drawing and

design with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side 29.00 SMT 2296.00

including base rail for sliding/hinge the gate having

ball bearing, rollers & guide tracks of 50x6mm M.S.

flat with hold fast, fabrication of side supports

including fixing GETCO letter on front side etc.

comp. with three coats of approved oil painting &

one coat of red oxide primer as directed by EIC (The

cost does not include the cost of reinforcement)

52 Providing & fixing pre-cast coloured Rubber Dye

inter locking concrete block 60 mm thick with grade

of concrete M300 pnumatic compressed by

mechanically pressed and as per approved design 367.00 SMT 701.00

including 75 mm sand layer for leveling and filling

the joint with sand in proper line and level etc

53 Providing & placing 50mm thick & 300mm wide

Prestressed Concrete Cover (for clear span of up to

1.2 meter in proportion (1:1:5:3) or M-20 necessary

reinforcement or 4mm dia HT steel wire-4 Nos. bars

and 4mm dia. distribution bars at 150 mm C/C as per

drawing & design & vibrating with vibrators. 22.00 SMT 525.00

Finishing all the surfaces, curing by placing in water

pond for ten days etc. complete as directed by E.I.C.

( The rate includes cost of all material required,

labour charges, transportation, loading, unloading

54 Providing and applying water proofing treatment by

following procedure mentioned here under.(1)

Surface preparation by cleaning dirt, dust and loose

Particles by mechanical cleaning by grinder and

then after mechanical cleaning use air blower to

remove all dust & dirt after cleaning hammering

test and crack filling (6 mm to 10mm) by mortat and

polyurethen sealant including Patch work repairing

by polymer mortar or GP-2, pressure grouting,

geofabric, waterproof tape etc. are supply by

contractor if require.(2) Waterproofing treatment

include, Step-1) Providing and applying primer

application of Providing and applying primer

application of aquastop base solvent base

polyurethane primer as per manufacture

specification and as directed by EIC. Step-2) After

applying priming coat, apply two coats of Aquastop

extraflex as per manufacturer specification and as

directed by EIC. Step-3) After applying two coat of

aquastop extraflex, apply one coats of Aquastop

protect as per manufacturer specification and as

directed by EIC (3) After completion of work pond

testing testing with fill water 50mm for 7 Days to be

carried out. The treatment is to be carried out up to

300 mm on vertical wall as vata. The measurements

shall be given only for clear area of terrace excluding

the area of vatta. The contractor shall submit

performance guarantee of the waterproofing in the

form of BG / DD at the rate of 20% of cost of

executed item of work order for a period of 5 years

from actual date of completion of work on stamp

paper of appropriate value in approved format of

GETCO. (Special note : Water proofing treatment

must be carried out by approved vendors of

manufacturer i.e. Kerakoll or it's equivalent

55 Providing & applying anti termite treatment, as per

IS 6313 (Part.II & II 2001) for building works in pre 361.00 SMT 107.00

construction & post const. stages, using chemicals

conforming to relevant IS in water emulsion and

effective when applied uniformly over the area to

be treated. The chemical to be used is

chlorophriphos 20% EC or its equivalent. The

treatment is to be carried out as per the procedure

mentioned below and treated plinth surface area is

to be taken for measurement. (with performance

guarantee for 5 years)a)For pre construction

treatment: For plinth filling & periphery holes in side

plinth to be drilled 300MM C/C each having depth

1.5M and for inside plinth the hole are to be treated

with diluted chemical solution, 1.5 lit. per hole, in

the ratio of 1:20. For periphery i.e. out side plinth

the ditch is to be treated with diluted solution

litre per rmt. In the ratio 1:20. The entire surface

area is to be treated with diluted solution of dose

2.5 litres per smt. over and above as a plinth surface

56 Providing & fixing approved quality 300x300mm size

marble year plate with black border all round &

letters including fixing the same in cement mortar

etc. comp. As directed by EIC.

57 Drilling of Bore holes 32mm to 40mm dia by means

of compressor machine having depth of hole up to

1.00 to 1.20 mt. as decided by Engineer in charge &

as per drawing in all sorts of Soil, sand, clay, hard

rock etc. truly vertical to existing land with cleaning

the same by air & Grouting of Bores holes by means

of Cement, sand, Grit, etc. with utilization of

aluminum powder or ACC shrink compound ‘N’ 272.00 RMT 446.00

grout or equivalent any other bonding material as

approved by competent authority in suitable

content with mixing ramming curing etc. complete

including with 20mm dia. of M.S. Anchor bar having

minimum length of 1.70 mt (Reinforcement) ( The

rate includes the cost of MS Anchor bar) as directed

by Engineer in charge.

[D] WATER SUPPLY AND DRAINAGE & MISC.

58 Providing, laying and jointing in true line and level

15 mm diameter UPVC pipe (SCH-40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer in

charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter c/c or shall be 10.00 RMT 72.00

concelled as directed including necessary fittings,

fastening, fixtures, excavation and back filling. The

rates includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost of all

59 Providing, laying and jointing in true line and level

25 mm diameter UPVC pipe (SCH-40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer in

charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter c/c or shall be 15.00 RMT 91.00

concelled as directed including necessary fittings,

fastening, fixtures, excavation and back filling. The

rates includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost of all

60 Providing, laying and jointing in true line and level

40 mm diameter UPVC pipe (SCH-40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer in

charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter c/c or shall be 100.00 RMT 147.00

concelled as directed including necessary fittings,

fastening, fixtures, excavation and back filling. The

rates includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost of all

61 Providing & laying rigid 6 kg/cm2 PVC drainage pipe

75mm dia. including necessary fittings like bend,

tee,Y bend plug etc. fixed with wall by means of 42.00 RMT 147.00

clamps & nails with water tight joints by approved

solution etc. complete as directed by EIC.

62 Providing & fixing FINOLEX or equivalent brand

approved quality rigid P.V.C. pipe for Rain water

kg/cm2 including necessary fittings like bends, shoe,

cowl etc. & fixing the pipes to the wall in plumb by 108.00 RMT 149.00

means of G.I. Clamps of 18 gauge sheet at 1 to

meter distance, filling the joints with approved

solution complete as directed by E.I.C. - 90 mm Dia.

63 Providing & laying rigid 6 kg/cm2 PVC drainage pipe

110mm dia. including necessary fittings like bend,

tee,Y bend plug etc. fixed with wall by means of 65.00 RMT 292.00

clamps & nails with water tight joints by approved

solution etc. complete as directed by EIC

64 Providing and laying (true level or slopes) and

jointing reinforced concrete light duty, nonpressure

pipes I.S. class NP/2 of the150 mm internal 154.00 RMT 367.00

diameter with collars and butt ends prepared for

collar joints including testing of units complete.

65 Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts including

necessary excavation & refilling the trenches, joining, the

pipes with C.M. (1:1) & filling 150mm thick concrete

(1:4:8) below joints, curing etc. completed as directed by

E.I.C I.S. Class NP3 of internal diameter 300 mm.

66 Providing and fixing approved quality PVC SWR

Nahani trap IS 14735 for drain 100 mm diameter

with jaliwith self cleaning design with CI scread

down or hinged grating including the cost of cutting 5.00 NO 608.00

with additional aluminum perforated jali cover &

Pipe outside the wall with plug, bend, and making

good the walls etc. complete as directed by E.I.C.

67 Providing and fixing approved quality S.W. gully

trap with C.I. Grating, brick masonry chamber and

water tight C.I. cover with frame of 300 mm x 300 4.00 NO 1279.00

mm size (inside) with standard weight. (B) 150 mm

x 100mm size P or R type.

68 Providing & fixing M.S. cover for cable trench in

control room made from 14 Gauge M.S. Sheet

having M.S. Angle frame alround of 40 X 40 X 5mm.

size and cover shutter frame of angle 30 x 30 x 5 mm

size & 2 supports at middle including oil painting of

3 coats of approved shade & make. Providing

handles of 6mm. dia. M.S. bar as per instruction etc.,

complete as directed by E.I.C.

69 Providing & fixing approved quality light type

455X610mmsize C.I. Manhole covers with water

tight C.I. Frame & fixing the same in concrete etc.

complete as directed by E.I.C.

70 Providing & fixing approved quality non-return

fullway wheel valve 40MM DIA UPVC make PRINCE

/ SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer in charge.

71 Providing & fixing approved quality non-return

fullway wheel valve 25MM DIA UPVC make PRINCE

/ SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer in charge.

72 Providing and fixing approved quality screw down

bib tapes of following size: (A) Brass screw down bib 9.00 NO 185.00

tap polished bright 15mm dia.

73 Providing & Fixing approved quality a set of 6 Nos.

of stainless steel coat racks of approved quality

fixed on 20 mm. thick teak wood batten including 3 2.00 NO 428.00

coats of oil painting etc., complete as directed by

74 Providing & fixing approved quality light type

600X600mmsize C.I. Manhole covers with water

tight C.I. Frame & fixing the same in concrete etc.

complete as directed by E.I.C.

75 Providing and fixing approved quality C.P. Brass

towel rod complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws.

600mmx20mm size

76 Providing and fixing approved quality 600mm x

450mm beveled edge mirror of superior glass

mounted on PVC moulded frame and fixed to

wooden plugs with C.P. brass screws and washers.

77 Providing & Fixing 450X400mm size Stainless Steel

approved brand Kitchen Sink Incl waste pipe & 1.00 NO 2304.00

Coupling etc; complete as directed by EIC.

(3) BORE AND WATER SUPPLY

78 Providing & fixing approved quality readymade

P.V.C. water tight storage tank of 1000 liters

capacity made from linear low density polythene &

low density polythene LDPF product confirming to

I.S. : 10146-1982 with cover including providing & 1.00 NO 4100.00

fixing one 20mm dia, float valve ball-cock, one

20mm dia G.I. over flow pipe of length up to 0.30 t.

including making all connection for inlet/outlet etc.

complete as directed by E.I.C.

79 Providing and fixing wash basin with single hole

pillar tap with tap with C.I. or M.S. brackets painted

while/colour including cutting holes and making

good the hole including pillar tap,chromium plated

bottle trap,stop cock, fisher union, Brass waste pipe

etc complet. 550mm x 440mm

80 Providing and fixing approved quality European

PAN water closet squatting pan size 580mm

including providing and fixing Plastic seat cover & jet

sprey, 100mm size P or S trap jointing tap with the

pan and soil waste pipe and with G.I. inlet

connection for flush pipe with W.C. pan and

chromium plated brass half turn flush cock of

approved quality of 25mm dia etc. complete.

81 Providing and fixing urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe concealed outlet (A) squaring

plate pattern white earthenware 550mm x 300mm

82 Providing B.B. Masonry inspection chamber for

underground CI inspection chamber and bends with

bricks heavy crushing strencth not less than

kg/cm2 in CM (1:5), CI cover with frame (light duty)

455mm x 610 mm internal dimensions, total weight

of cover with frame to be not less than 38 kgs

(weight of cover 23 kg and weight of frame 15 kg).

RCC top slab with 1:2:4 mix (1cement: 2Coarse sand

: 4 graded stone aggregate 20 mm size). Foundation

cocnrete 1:5:10, inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with floating

coat of neat cement on walls and bed concrete etc.

complete. Inside dimensions 450mm x 610 mm up

to 900 mm deep.

83 Providing 2500mm internal diameters & 4.00 Mt

deep soak pit including excavation in all types of soil

& soft rock & Hard rock & P.C.C. (1:4:8) bedding

300mm thick below masonry and 450mm thick brick

masonry in C.M. (1:6) up to 600mm height 350mm

thick for further 600mm & 230mm thick for

remaining height honey combed, plastering in

C.M.(1:3) outside up to 1.5mt height and 100mm

thick RCC slab with 600x600mm CI having cover with

frame, with necessary reinforcement as per design

& CI vent pipe 1800mm long with brick masonry

pillar 350x350x450 plastered all around filling 40 to

50mm brick bats up to 1.5Mt depth including 16mm

dia MS"U" stages steps refilling including disposal of

the surplus excavated earth up to the lead of 300Mt

radius including 3 coats of white or colour wash to

all exposed finished surface etc. completed as

[E] YARD LELLING & METAL SPREADING & ROAD

84 Earthwork in cutting in all sorts of soil and soft

murrum including sorting out and stacking of useful

materials & Refilling the sides of the

trenches/wall/open area and disposing of the

excavated stuff up to any lead as and where

directed by EIC

85 Rolling of Earthwork in layers with power roller

including filling in depressions which occure during

the process and watering of earth work as directed

by engineer in charge.

86 Providing and laying 150 mm thick Granular sub-

base in two layers by providing coarse graded

material Grading- I using B.T.M.C. (Black Trap

Machine Crushed) metal 53 mm to 26.5 mm at 35 %

, crushed stone aggregate 26.5 mm to 4.75 mm at

45% and below 2.36 mm at 20% ,having C.B.R. not 113.00 CMT 871.00

less than 30%, as per table 402 of MORTH gradation

including leveling the material at site of work

,mixing and spreading into grade and camber

watering and consolidation at OMC with roller

including cost of material ,labour etc complete - GSB

87 Providing and laying spreading and compacting

machine crushed black trap stone aggregate(53

mm to 22.4 mm at 30 % , crushed stone aggregate

22.4 mm to 2.36 mm at 40% and below 2.36 mm at

30%), 150mm thick Wet Mix Macadam in two layers

the material with water to OMC in mechanically mix

(pug mill) carriage of mix material by tipper to site

laying, spreading and compacting in sub base, base

course on well prepared under base of compacting

with roller to achieve the desired density etc

completed as directed by Engineer in charge

(Mechanically laid) WMM

88 Providing and Laying Controlled cement concrete

M20 for trimix RCC road to require line, level, slope

including of (1) Providing 125 micron polythene

sheet at base of concrete, (2) Mixing approved

quality polyester fibre (12mm) @125 gm per bag or

as per manufacturer's specification during

concreting (3) Shuttering form work of M.S. C

Channel sections of required length & height as per

drawing including connection, bracing pins or stake

to require line, level, slope etc. (4) Concreting

compaction with using needle Vibrator, Double

beam screed vibrator , dewatering/Vacuum pump

and finishing the surface with Power Trowel Cum

Floater including any low or high spots shall be

made up by adding or removing concrete and

refinished to required line level and slope.(5)

Providing light brooming on the surface and edging

carefully finished with an edger of 6 mm radius.(6)

Providing construction joint using Concrete Groove

Cutter machine of size 10 mm wide & 25 mm deep

in transverse direction @ 4.5 M C/C and sealing with

approved quality grade B bitumen sealant (7)

Providing Contraction (Dummy) joint using

Concrete Groove Cutter machine of size 5 mm wide

& 25 mm deep in Longitudinal direction and sealing

with approved quality grade B bitumen sealant(8)

Providing expansion joints of size 25 mm width and

upto through depth of concrete using 25 mm thick

Dura Board HD-100 of approved quality and sealing

25x20 MM top with approved quality bitumen

sealant at 40 Meter C/C with 63 MM Dia P.V.C pipe

cap filled with compressible material for dowel bar.

( For 6m wide road longitudinally at the centre

expansion joint to be provided)The Item rate is

including with all necessary equipments, machinery,

tools, tackles, Labours & Pond / Jute bag Curing etc.

complete as per Drawing and as directed by E.I.C.

(Minimum cement content for Concrete is

Kg/Cmt & Excluding the cost of reinforcement and

SCHEDULE B (PART A)

Electrical Section B

SCHEDULE B - 1 : CONTROL ROOM INDUSTRIAL

ELECTRIFICATION

89 Providing and fixing of DBS as AC Panel - 1 for CR of

ISI marked Powder coated Pearl DBS of ivory color

wall mounting, Double door Distribution board of

L&T, Heggar or higher make fitted with 63Amp

Phase Bus bar, Earth / Neutral Bars and inter

connecting wires with removable bottom gland

plates for all power cable entry from bottom with

DIN Channel ,incoming contact and 1No. - 63Amp

TPN MCB 'C' Series, 6Nos. - 20A SP MCB 'C' Series

and 13Nos. -10A SP MCB 'C' Series All MCBs are L&T,

Anchor or Higher make only. Complete in all respect

and as per instruction of EIC.

90 Supplying & laying of following size Control/L.T

power cable of FINOLEX or equivalent ISI make in

readymade cable trench or by excavating in any

type of soil cable trench size 300mm wide and

600mm depth and refilling the same as per the

direction of EIC. Item Includes the cable laying up to

termination box with clamps & proper clamping of

cable on gantries by GI pipe & glands as per Mtr 100 175.00

direction. Item includes providing & fixing of bricks,

sand as per requirement to protect cables . The L.T

power cable to be provided by contractor as under

:As per ISI 1554 (Part-I). 4 Core x 25 mm2 Aluminum

cable -Armored, from LT panel board (LTPB) to Yard

Light AC MK (AC Panel-2)., AC Panel 1 in C.R. and

91 Supplying & Laying Sub-main lines of 3X2.5 mm2 (

two for P & N and one for Earthing) copper PVC

insulated wier of ISI brand in suitable standard make

steel conduit pipe having minimum 1.5 mm

thickness of approved brand with ISI brand with

clmpes with it's associated accessories for various

circuits amanating from AC panel 1.as per inst. of

92 Point wiring for control room tube lights, fans,

exhaust fans, fency lights, water tight bulck head

lights with PVC insulated 660 V grade standard

copper wire in ISI make GI conduct pipe 20 mm dia

and 1.6 mm wall thickness size fitted with sadles on

the wall/ceiling. Size of wire shall be with 3C x

sq.mm PVC insulated copper wire for phase and

neutral and earth wire [ Green] and 5 Amp Point 70 1298.00

Anchor/Roma or any equivalent switch as per

specification with 16 guage M.S. box. The box shall

be covered with 3 mm thick decorative mat finish

hylum sheet. The work is all inclusive of supply and

fixing of required materials as afore said [ like GI

conduct pipe , sadles , swithces , Steel box , ceiling

Rose , flexible copper wire etc] to complete point

wiring with each fixture to be earthed by SWG-12

stranded copper conductor having green color as

per direction and instructions of E.I.C.

93 Providing, fixing & termination for Emergency D.C.

supply arrangment. This job includs supply & laying

of 2C x 2.5 mm2 Copper arrmoured cable from

battery charger to SBDC, fixing & providing SBDC & Job 1 4492.00

complete wiring with supply of wire & D.C. lamp

(110V D.C., 100 watt-4 Nos.) in standard steel

conduit pipe as per inst. of E.I.C.

94 Providing and Fixing points wiring in GI. Conduit size

20 mm dia and 1.6 mm wall thickness with single

PVC insulated 2.5 Sqmm. copper wire of ISI standard

good quality using 1.5mm thick suitable size ISI mark

Anchor brand 15 Amp. 250 Volt, 5-pin plug socket

Point 16 1213.00

as seperate plug point with shock proof accessories

incl. indication lamp; erected on separate

decorative mat finish hylum sheet board on wall

with providing adequate green earthing wire as per

specification and instruction of Engineer Incharge.

95 ---- Do ---- as above but with singal PVC insulated

3Cx1.5 sq. mm.copper wire of ISI mark plug socket

for 5A domestic use separate plug pointas per

direction and instruction of E.I.C.

96 ---- Do ---- as above but looped on same board i.e.

No separate board, plug socket for 5A domestic use Point 15 199.00

as per direction and instruction of E.I.C.

97 Providing and fixing of 1200mm celling fan

CGL/ORIENT/USHA make white colour with all

required accessories. Fan is to be purchased from

authorised dealer. Flexible wiring using twin core

double PVC 48/0.2 mm copper flexible cord of

suitable & approved make and size from ceiling rose No 14 1597.00

upto fan terminal & supply and fixing of energy

saver regulators, extra GI pipe of required size and

length for lowering of fan if required as per

instruction of EIC.

98 Providing & Fixing of 50 W LED Lighting Fixture (CGL

Cat No. LCTLR-50-FO-CDL 50W or equivalent under

Cat-II or above as per R&B SOR), 4-core 2.5mm2

double insulated flexible strended wire should be No 24 5059.00

used from control gear fittings to approved SMC

type junction box as per inst. of EIC.

99 Providing and fixing of 41.5W LED Lighting Fixture

(CGL Cat No. LPFC-36-CDL 41.5W or equivalent

under Cat-II or above as per R&B SOR) as per No 4 3154.00

instruction of EIC.

100 Providing and fixing of 40W (1X4) LED Lighting

fixtures as per drawing (in office area & Porch Area)

(CGL Cat No. LCTLSN-40-CDL (1X4) 40W or

equivalent under Cat-II or above as per R&B SOR) as

per instruction of EIC.

101 Providing & fixing of 30W LED Street Light Bulkhead

(CGL Cat No. LSTO-30-CDL 30W or equivalent under

Cat-II or above as per R&B SOR) on out side C/R

building and inside cable trench in C/R including

wiring from ceiling rose to fixture with suitable size

of PVC insulated ISI marked copper wire only as per

Instruction of EIC.

102 Providing and fixing of heavy duty exhaust fan in

battery room size 18" of Make GEC/KHAITAN/

CROMPTON/ BAJAJ incl. M.S. louver shutter of Fan

& necessary wall finishing works and applying bird

proof net on outside wall with required No 2 3494.00

arrangement for rain water sealing and necessary

conection from ceiling rose as per Direction and

instruction of EIC.

103 Providing & Fixing of Electric bell with bell switch

near officer's table. All materials must be ISI mark

and approved by EIC. No 1 149.00

104 Providing and fixing of 18W LED Lighting Fixture

(CGL Cat No.. LCTL-18-CDL 18W or equivalent under

Cat-II or above as per R&B SOR) as per instruction of No 3 1281.00

105 Providing & Fixing of G.I. 1.5Mtr Long, 16MM Dia

Lightning Rod (Spike) for Lightning Protection of

Control Room Buiding as per Instruction of EIC as

shown in Drawing No.. GETCO/E/STD/DSLP-66kV No 4 141.00

CR- R0 Dtd. 26.10.17

106 Providing & fixing of 50x6 mm GI Flat for Control

Room DSLP Protection. The work is to be carried

out as per Drg. No.. GETCO/E/STD/ DLSP-66kV CR,

R0 dated:26.10.17 as per inst. of EIC. The rates are

including fixing of clamps on wall which is to be RMtr 120 296.00

fabricated from 50X6 GI Strip. (GI Strip will be

supplied by GETCO Free of Cost)

107 Supply,Installation,Testing and commissioning of

maintenance free treated earth electrodes suitable

for Rocky Soil as per drawing No. GETCO/E/STD/P-

021 (2 OF 2) R3 dated 29-05-2020 and technical

specifications GETCO/E/TS-Maintenance free earth

pits/R1 dated 04-06-15 for 66/11 kV substations

with ground enhancement material/ back fill /

grounding compound as per IEEE 80-2000 Clause

14.5 (d) and as per part-7 of IEC-62561 Using No 5 14844.00

Copper bonded earth electrode (with 250 micron

copper coating) having 24 mm dia (min) and

mm length which shall be capable of handling STC

of 25 KA-1 sec. Work also includes Providing BB

masonary inspection chamber(manhole) incl. light

108 Providing & fixing of Wall Mounted Fan Crompton /

Orient/ PSPO / Usha / Cinni (must be ISI approved).

including wiring from ceiling rose to Fan terminals

of by using twin core flexible PVC to PVC 48 / 0.2 No 1 1597.00

mm copper cord of suitable & approved size & fixing

of Fan regulator.

109 Providing & fixing of all weather proof, cold rolled

sheet steel AC Panel - 2 for Yard-Light AC supply

(1) 63A 4P MCB : 01 No.

(2) MCX-12A contactor : 01 No.

(3) Digital Timer : 01 No.

(4) 20A TPN MCB : 06 Nos

(5) Indication lamp " 03 Nos

(6) Push Butten : 02 Nos

(7) Terminal Connector as per site requierment

and other detail as per drawing enclosed including

grouting & Necessary fabrication of GI Angle or

fixing on GI Structure, including earthing with main

grid as per instruction of EIC.

110 Providing & fixing of all weather proof, cold rolled

steel sheet floor mounted fixed type single door

grey color Main AC Dist box having size

900x600x250 MM with door closing arrangement

and necessary rubber gasket.

Contractor has to supply following materials with

box along with necessary mounting and wiring.

(1) L&T/Anchor/Havells Make 100A,4P MCCB - 1 No.

(2) L&T/Anchor/Havells Make 63A,4P MCB - 2 Nos.

(3) 100 A Copper Bus-Bar Link - length 6 inch size &

25 x 3 MM - 4 Nos.

(4) Tinned Earth Bus 25 x 3 MM Length - 32 Inch -

(5) 25 & 16 sqmm Cu. flexible cable - 4 & 8 Meter

(6) Required Nos. of Cu. Lugs , etc. as per instruction

111 Supplying & laying of following size Control/ L.T.

power cable in readymade cable trench or by

excavating in any type of soil cable trench size

300mm wide 600mm depth and refilling the same

as per the direction of EIC. Item Includes the cable

laying upto termination box with clamps & proper

clamping of cable on gantries by GI pipe & glands as

per direction. Item includes providing & supply of

bircks, sand as per requirement. The L.T power cable

to be provided by contractor as under :As per ISI

1554 (Part-I). 3.5 Core x 50 mm2 Alluminium cable -

Armoured, from distribution X'mer to Main

Distribution Board near dist. X'mer and from MDB

to indoor LT panel board (LTPB) - both 2 runs.

112 Providing and fixing of ISI mark Rubber Matting

sheet Suitable for 11kV Class As per following

Reference IS:15652-2006 with latest amendment.

Suitable for Voltage Class :B

Max Use Voltage : 11kV

AC proof voltage : 22kV

Dielectric strength : 45kV

Leakage current : < 10 micro ampere

SQMTR 24 4492.00

Make : Vardhman or equivelent ( Rubberhouse

Thickness :2.5 mm.

Surface :Chequred on one side and other side plain.

Contractor has to supply Rubber Matting sheet as

per IS:15652-2006 with latest amendment

specification and shall submit test certificate for

routine test as per relevant IS

113 Supply of 100W LED Flood light, Rating 100 W,

Operating voltage 120-280 V AC 50Hz , light output

10000Lm, Body : Alluminium Die Cast, Warrenty

Year, make (ISI approved).

114 Providing & Fixing of Aquaguard Total Reviva Water

R.O. Plant including Commissioning & Testing and

also with required peripherals for installation of

plant as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the 12 month

from the installation.

Total Estimated Cost for Civil Works (Part B)

SCHEDULE B - 2 : SUPPLY OF FURNITURE

115 Supply of Steel Chair 'S' type, overhanging arm with

cushion with cane seat/ 1"x16" gauge round pipe

frame complete as per instruction of EIC &

procurement from Adult training center for No. 2 1850.00

blind,Ahmedabad as per Corporate office letter no.

ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 &

GOG Circular SPO/102015/691093/CH.

116 Supply of Steel Rack of size 36"x30"x12" (3' x 2.5'x1')

with three partitions, prepared with 20 gauges as

per instruction of EIC & procurement from Adult

training center for blind, Ahmedabad as per No. 1 2100.00

Corporate office letter no. ACE(Proc)/V/

Furniture/2016-17/2943 dt 1.3.17 & GOG Circular

117 Supply of Steel Table of size 54"x30"x30" (4.5' x 2.5'

x 2.5') one side three drawers, one side shelf 1x18

gauge square pipe with Nova PAN Prelaminated top

complete with locking arrangement to drawers &

self as per instruction of EIC & procurement from

Adult training center for blind, Ahmedabad as per

Corporate office letter no. ACE(Proc) / V/

Furniture/2016-17/2943 dt 1.3.17& GOG Circular

118 Supply of Computer Table from prelaminated board

with Key board facility and drawer with locking

facility with continuous printer out facility & mouse

tray and also with special tray fo CPU & UPS having

size 42''x24''x30'' complete as per instruction of EIC

& procurement from Adult training center for blind,

Ahmedabad as per Corporate office letter no.

ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 &

GOG Circular SPO/102015/691093/CH.

119 Supply of Steel revolving Chair, revolving & tilting,

low back high type seat with foam rubber 3" in seat

2" in back with good quality raxine cover ,five legs.

Chromium plated frame complete as per instruction

of EIC & procurement from Adult training center for

blind,Ahmedabad as per Corporate office letter no.

ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 &

GOG Circular SPO/102015/691093/CH.

120 Supply of Steel Cupboard , of size 78"x36"x18" four

partition, door & Shelves 20 gauge complete as per

instruction of EIC & procurement from Adult

training center for blind, Ahmedabad as per No. 1 9200.00

Corporate office letter no. ACE(Proc)/V/

Furniture/2016-17/2943 dt 1.3.17 & GOG Circular

TOTAL ESTIMATED COST FOR FURNITURE (PART-C)

TOTAL COST OF CIVIL WORKS IN Rs.(PART A+B+C)

In Words :- One crore Fourty Seven Lacs Twelve Thousand Two Hundred Seventy Four Rupees and Ninety Seven Paisa

NOTE: (1) Please note that change in commercial terms & conditions in (i) Section-A ”Instruction to Bidders” , (ii)

Section-C (Conditions of Contract), Caluse No.3 (Compensation for the delay) and clause No.6 (Action on default

by contractor) and (iii) Section-D (General Condition of Contract), Clause-37 (Rights of Owner), Clause-38

(Relationship with employee) and clause-39 (Conflict of Interest among Bidder/Agents)

Supt Engineer (TR),

GETCO: Circle Office, Jamnagar.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by

GETCO on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are

willing to carry out the work at _________________% (in words ______________percentage) above/below the

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

SIGNATURE OF CONTRACTOR.

(With rubber stamp/seal of the company)