Renovation of Hostel Building No.-2 for Anusuchit Janjati Balika Vidyalaya under Chaibasa Block, West Singhbhum For the Year-2021-22

Amount

Making plinth protection 50mm thick of cement concrete(1:3:6) (1cement:3 coarse sand:6graded stone aggregate 20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling and drressing and finishing the top soomth.

Providing 150mm. wide brick drain in cement mortar (1:6) with av. 125 mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Extra for cleaning the old surface by scraping the entire old white wash or colour wash including cost of scaffolding taxes all complete job as per direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing and laying vitrified parking/industrial tiles in different size (thickness to be specified by the manufacture)with water absorption less than 0.08% and confirming to IS:4457:2007,of approved make in all course

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacture of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc.,complete.

Providing and laying 20 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying 20 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.21.8.1 Upto 5mm depth and 5 mm width

Stainless steel wire guage (Grade-304)aperature 1.4mm and 0.50mm dia wire all complete job as per direction of E/I.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :100x60x2.50mm

Stainless steel butt hinges 125x64x1.9mm IS:12817marked all complete job as per direction of E/I.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.100mm

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :150x10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete :250x16 x5mm

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.

Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.

Taking down R.W.D. pipe carefully stacking on the ground and refixing the same in proper place after cleaning at thoroughly all complete as per direction of E/l.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc.,removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.

Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side),having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin- charge. 9.142.1 Non decorative finish (matt finish

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge

Providing and fixing factory single extruded WPC(wood polymer composite)solid door/window/ ceosetory windows and other frames/chowkat comprising of virgin PVC polymer of K value 58-60(suspension grade)calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives (maximum tixicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded frame size 50x100mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30mm thick

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all jointsetc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 14.91.1 3 mm thick Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.

Providing and fixing filling of 6mm thick grooves all complete job as per direction of E/I.

Taking down ceiling of any type and refixing them after repair with departmental material within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

110mm coupler

110mm bend

110mm shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm

Carriage of materials from nearest approved sources of supply including loading intro trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

Sand lead(1K+8P) 9Km

Stone chips lead(1K+7P) 8Km

Stone Metal lead 8Km

Brick lead (1K+7P)8Km

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l

Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l.

Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .15mm dia

Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.

Horizontal -25mm dia

Horizontal -32mm dia

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

125mm thick wall

250mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

300x450mm size Mirror

C.P.brass Towel Rail

C.P.brass soap container medium quality with screws and hinges etc.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(c) with 12.5 lit. low level P.V.C. cistern

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Sujpplying NP2 RCC hume pipe with collar as work site as per direction of E/I.

Supply special type of C.P.bath fittings for V.I.P building (JAL,JAGUAR,MARC) or equivelent mark all complete job as per direction of E/I.

Angular stop; cock/2way Bib cock

Telephonic shower flexible pipe

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75mm dia meter

110mm dia meter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single Tee without door 75x75x75mm

Single Tee without door 110x110x110mm

75mm dia bend

110mm dia bend

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25mm nominal outer dia pipe

32mm dia nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

15mm dia nominal outer dia pipe

20mm dia nominal outer dia pipe

Polythene water storage tank of ISI mark (e.g. sintex/Sinter/ Himgiri etc.) with cover and locking system.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Point wiring in PVC conduit with piano type switch:- Wiring for light point/exhaust fan point/call bell point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit with Piano type switch,Phenolic laminated sheet,suitable size PVC/G.I.box etc.as required.

Twin control point wiring in PVC conduit with piano type switch:- Wiring for twin control light point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2way piano type switch,phenolic laminated sheet sheet,suitable size PVC/G.I.box etc.as required.

Power plug wiring in PVC conduit(2x4Sq.mm) Wiring for light/power plug with 2x4Sq.mm FRPVC insulated copper conductor single core cable in surface or in recessed PVC conduit along with 1No4Sq.mm FRPVC insulated copper conductor single core cable for loop earthing etc. as required.

Circuit/submain wiring PVC conduit:- Wiring for circuit/submain withing along with earth wire with the following sizes in PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required.

2x1.5Sq.mm+1x1.5Sq.mm earth wire

2x2.5Sq.mm+1x2.5Sq.mm earth wire

4x6Sq.mm+2x6Sq.mm earth wire

S/F piano type switch/socket:- Supplying and fixing of following piano type switch/socket on the existing switch box/cover including connection etc.as required.

5/6Amp one way switch

3Pin 5/6Amp socket outlet

Modular type Electronic step fan regulator,deluxe

S/F light plug point with piano type Accessories:- Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 5Pin 5/6Amp socket outlet and 5/6Amp piano type switch connection, painiting etc.as required.

S/F light plug point with piano type Accessories:- Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 6Pin 15/16Amp modular socket outlet and 15/16Amp modular type switch connection, painiting etc.as required.

Supplying and fixing 2pin ceiling rose on the existing junction box/wooden block including connection etc.as required.

Supplying and fixing batten/angle holder including connection etc.as required.

Installation Testing and commissioning of pre-wired fluorescent fittings/ compact fluroescent fitting all type complete with all accessoires and tubes etc.directly/wall including connection witgh 1.5Sq.mm FRPVC insulated copper conductor single core cable and earthing etc.as required.

Installation Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30cm)with 1.5Sq.mm FR PVC insulated copper conductor, single core cable etc.as required.

Installation Testing and commissioning of exhaust fan upto 450mm sweep in the existing opening including making the hole to suit the size of the above fan,making good the damage,connection,testing,commissioning etc.as required.

Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in the existing metal with rewireable type fuses including drilling holes in metal board making connection etc.as required.

63Amp double pole

100 Amp TpN

Providing and fixing following capacity busbar chamber with 4strips of length 300mm made of copper suitable for following capacity complete with all accessories including connection edarthing the bodey etc. as required. 100Amp

Supplying and fixing following way single pole neutral,sheet,MCB distribution board 240Volts,on surface/recess-do-do-all complete job as per direction of E/I.8Way single door

Supplying and fixing 6Amp to 32Amp rating 240Vls 10KA,"B" Series miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc.as required.

6/32Amp single pole"B" Series

Supplying and fixingv following rating double pole 240V ,Isolator in the existing MCBDB complete with connection,testing and commissiong etc.as required.

63Amp double pole

Earthing with G.I.earth pipe 4.5meter long 50mm dia including accessories and providing masonarty enclosure with cover plate having -do-do-all complete job as per direction of E/I.

Supplying and laying 8SWG copper wire at 0.50M below ground level for conductor earth icnlduing sholdering etc.as required.

Providing and fixing of lightning conductor sinal made of 25mm dia 300mm long copper tube having single prong at top with 85mm dia 3mm thick copper base plate base including holes etc.complete as required.

Providing and fixing copper taper 20x3mm thick on parapet or surface of wall for lighting conductror complete as required(For Horizontal run)

Providing and fixing copper taper 20x3mm thick on parapet or surface of wall for lighting conductror complete as required(For vertical run)

Laying of one number PVC insulated and PVC sheathed.XLPE power cable of 1.1Kv grade of size exceeding 25Sq.mm but not exceeding 120Sq.mm direct in ground including excavation sand cushioning,protective covering and refilling the trenches etc.as required.

Providing and fixing of XLPE aluminum Armoured PVC cable conforming to IS 7908(Part-I)1988 of grade 1.1KV make Havles/Finolex/Polycab. 3.5core 35Sq.mm

Supply of 9/10 watt LED blub

Supply of LED batten (20/22W)

Recess mounting LED LED Round down light (18/20W)

Supply LED Street light(45/48W)

Supply and Installation of ceiling fan 48"(1200mm)

Supplying fitting and fixing and testing of 9" (230mm)metal exhaust fan.

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

SHANKAR CONSTRUCTION CHAIBASA PVT.LTD