REPAIRS AND POLISHING PAINTING OF STEEL AND WOODEN FURNITURE AT MASIMPUR VAIRENGTE AND LAILAPUR UNDER GE SILCHAR

Amount

WOODEN FURNITURE (MASIMPUR)

M&L for carrying out repair and replacement of the following under-mentioned parts of bed hard by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-246

S&F leg of size 60x60x660mm made out of 1st class hard wood (head rest side)

S&F leg of size 60x60x660mm made out of 1st class hard wood (foot rest side)

S&F long rail frame of size 35x90x1980mm long made out of 1st class hard wood

S&F short rail frame of size 60x60x900mm made out of 1st class hard wood

S&F head board frame made out of 1st class hard woodwith 4mm thick OST plywood as per existing shape & size

S&F foot board frame made out of 1st class hard wood with 4mm thick OST plywood as per existing shape & size

S&F ply top made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 as approved

S&F stiffiner to support plywood made out of 1st class hard wood of size 40x60x900mm

S&F 3.5mm thick one side face plywood alongwith half round wood beading allround

M&L for carrying out repair and replacement of the following under-mentioned parts of chair wooden bottom w/o arms by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-225

S&F front leg of size 50x50x445mm high made out of 1st class hard wood

S&F rear leg of size 40x65x840mm high made out of 1st class hard wood

S&F front rail of size 25x65x415mm long made out of 1st class hard wood

S&F rear rail of size 25x65x375mm long made out of 1st class hard wood

S&F side rail of size 25x65x400mm long made out of 1st class hard wood

S&F back stiffner 15x50x375mm long (slightly curved) made out of 1st class hard wood

S&F stiffiner of size 20x25x400mm long made out of 1st class hard wood 100mm high from bottom

S&F seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia perforations to be provided to plywood seat as approved

M&L for carrying out repair and replacement of the following under-mentioned parts of chair easy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-229 & FD-1108

S&F front legs of size 55x25x535mm high made out of 1st class hard wood

S&F rear legs of size 55x25x535mm high made out of 1st class hard wood

S&F front rails of size 25x70x520mm long made out of 1st class hard wood

S&F rear rail of size 50x25x500mm long made out of 1st class hard wood

S&F side rails of size 25x70x520mm long made out of 1st class hard wood

S&F lower / upper rail of back rest made out of 1st class hard wood

S&F side rail of back rest made out of 1st class hard wood

S&F of arms of size 65x25x610mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-228 & FD-279

S&F front leg of size 45x45x460mm high made out of 1st class hard wood

S&F rear leg of size 45x65x890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F of side rail of size 30x65x380mm long made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner of size 25x19x400mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining JCO/OR by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/05

S&F front leg of size 45x45x460mm high made out of 1st class hard wood

S&F rear leg of size 45x65x890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F of side rail of size 30x65x380mm long made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner of size 25x19x400mm long made out of 1st class hard wood

S& F 4mm thick PVC seat in single piece

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining cushioned by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/04

S&F front leg of size 45mmx45mmx460mm high made out of 1st class hard wood

S&F rear leg of size 45mmx65mmx890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F side rail of size 30x65x400mm long made out of 1st class hard wood

S&F seat made out of 12mm thick ply bottom with 40 density foam cushion 75mm thick duly covered with tapestry cloth / letherite material (not less than Rs. 250/m) as approved

S&F back stiffner of size 15x50x390mm long horizontal rest slightly curved U shaped made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of table 3'x2' with drawer or w/o drawer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-283, 284, 223 & 224

S&F leg of size 60x30x740mm high made out of 1st class hard wood

S&F short rail of size 20x60x600mm long made out of 1st class hard wood

S&F long rail (with drawer) of size 20x60x900mm long made out of 1st class hard wood

S&F long rail of size 20x60x900mm long made out of 1st class hard wood

S&F drawer as per existing shape & size made out of 1st class hard wood with 1No. CP knob of approved design

S&F stiffiner of size 25x40x600mm long made out of 1st class hardwood

S&F table top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-275

S&F leg 35x55x732mm high made out of 1st class hard wood

S&F top long rail 25x50x790mm long made out of 1st class hard wood

S&F top short rail 25x50x600mm long made out of 1st class hard wood

S&F bottom rail (side/short stiffener) 20x50x355mm long made out of 1st class hard wood

S&F bottom rail (front/long stiffener) 20x50x355mm long made out of 1st class hard wood

S&F cabinet side of table made out of 19mm MDF board commercial with 1mm thick laminated sheet

S&F cabinet back with 6mm ply wood commercial

S&F cabinet bottom of 19mm thick MDF board commercial

S&F cabinet bottom legs of 1st class hard wood

S&F door / front shutter of cupboard as per existing size & shape made out of 19mm thick MDF board commercial with 1mm thick laminated sheet (of approved colour and pattern) with 50mm cadmium plated stainless steel hinges and suitable locks (ISI marked)

S&F of drawer as per existing shape and size with 1No. CP knob of approved design

S&F table top of size 1175x600mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (4 persons) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/03

S&F leg of size 90x45x750mm heigh made out of 1st class hard wood

S&F of long rail of size 45x90x1200mm long made out of 1st class hard wood

S&F of short rail of size 45x90x900mm long made out of 1st class hard wood

S&F table top of size 1200x900mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (6 persons) MAP by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/03

S&F leg made out of 1st class hardwood

S&F long rail made out of 1st class hard wood

S&F short rail made out of 1st class hard wood

S&F top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table center by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-235, FD-274

S&F leg of size 45x45mm at top and 30x30mm at bottom and 372mm high made out of 1st class hardwood

S&F long rail of size 40x19x900mm long made out of 1st class hardwood

S&F short rail of size 40x19x450mm long made out of 1st class hardwood

S&F table top of size 900x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of teapoy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-232, FD-278

S&F leg of size 60x30x532mm high made out of 1st class

S&F long rail of size 20x60x600mm long made out of 1st class hardwood

S&F short rail frame of size 20x60x450mm long made out of 1st class hardwood

S&F top of size 600x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of peg table by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-277, FD-384

S&F leg of size 30x50x370mm high made out of 1st class hardwood as per existing size & shape

S&F top long rail of size 20x40x450mm long made out of 1st class hardwood

S&F top short rail of size 20x40x300mm long made out of 1st class hardwood

S&F top of size 450x300mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table dressing ladies with mirror by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-251

S&F of Legs made out of hard wood

S&F of Long rails made out of hard wood

S&F of Short rails made out of hard wood

S&F of Top 18/19 mm thick plywood with 1 mm thick plastic laminated sheet and wooden beading, complete all as specified and as directed.

S&F of Bottom made of 18/19 mm thick plywood with 1 mm thick plastic laminated sheet and wooden beading, complete all as specified and as directed.

S&F of Side of 18/19 mm thick plywood with 1 mm thick plastic laminated sheet , complete all as specified and as directed.

S&F of Back 12 mm thick ply commercial BWR

S&F of Mirror size 1220 mm x 366 mm x 5.5 mm thick ,Make-Saint Gobain/Modi Guard

S&F of Mirror Frame of hard wood with 6 mm thick ply commercial in back.

S&F of Sliding glass 300x300x6mm thick with almn Channel complete

S&F of Drawer made out of 12 mm thick plywood with one Nos CP knob in front.

M&L for carrying out repair and replacement of the following under-mentioned parts of Side Board by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-26 (M) &FD 241

S&Fof Legs made out of hard wood.

S&F of Long rail made out of hard wood

S&F of Short rail made out of hard wood

S&F of Back side 6 mm commercial ply

S&F Top 18 mm thick Pre-laminated particle board .

S&F of side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

S&F of Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

S&F of Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

S&F of Drawer complete with 2nd class hard wood and bottom 6 mm thick ply wood connected with CP knobs in front.

M&L for carrying out repair and replacement of the following under-mentioned parts of Book case wooden by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-237

S&F of Legs made out of hard wood.

S&F of Long rail of hard wood (of leg frame)

S&F of Short rail of hard wood (of leg frame)

S&F of Back side 6 mm thick BWR grade plywood

S&F of Top 18 mm thick Pre-laminated particle board .

S&F of side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

S&F of Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

S&F of Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

M&L for carrying out repair and replacement of the following under-mentioned parts of table dressing (gents) with mirror by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-230

S&F table top made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick wood edging all around the top

S&F bottom partition made of 18/19mm thick block board commercial type ISI marked of size 900x300mm

S&F back made out of 12mm thick ply wood commercial, BWR grade

S&F side and partition made out of 12mm thick pre-laminated particle board

S&F drawer of existing size, made out of 12mm thick plywood with 01No. CP knob of approved design at front

S&F 5mm thick mirror of size 380x760mm with 6mm thick plywood commercial back 1st class hard wood frame all around with 2Nos. key plate of existing size, type and of approved design

Removing old existing polish by washing with caustic soda and rubbing with sand paper and smoothening surfaces and applying two coats of french polish, glossy finish for the following as shown on drawings, as specified and as directed

Bed Hard (FD-246)

Chair WB W/O arms (FD-225)

Chair easy (FD-229, FD-1108)

Chair dining (FD-279, FD-228)

Chair dining with cushion (FD/MAP-II/04)

Chair dining JCO/OR (FD/MAP-II/05)

Table 3'x2' with drawer / WO drawer (FD-224, FD-223, FD-283, FD-284)

Table writing (FD-275)

Table dining 4 persons (FD/MAP-II/04)

Table dining 6 persons (FD/MAP-II/04)

Table centre (FD-235, FD-274)

Teapoy (FD-232, FD-278)

Peg table (FD-277, FD-384)

Table dressing ladies with mirror (FD-251)

Table dressing (Gents) (FD-230)

Sofa set 5 seater (FD-281, FD/E6/MAP-II/02)

Sofa set 4 seater (FD-281, FD/E6/MAP-II/02)

Removing of old worn out / unserviceable cane from various types of furnitures and re-canning the same with new plastic cane (oval shaped), white coloured, 2mm wide for caning and 4mm wide half round for beading in Godrej pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-229,FD-1118, FD-279, FD-280

S&F in repairs foam cushion 530x560x100mm thick 40 density rubber foam duly covered with marking cloth and tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

S&F in repairs cushion cover to fit over cushion foam of size 530x560x100mm, in tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

STEEL FURNITURE (MASIMPUR)

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah medium with shelves & almirah medium with 1/2 H x1/2 S by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1032 & FD- 1034

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 100mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Cleat made out of 1.00mm thick MS sheet of suitable size as per existing for fixing of shelves

Shelves made out of 1mm thick PBI sheet as per existing

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah large with shelves & almirah large 1/2 H x 1/2 S by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1031 & 1034

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 150mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Cleat made out of 1.00mm thick MS sheet of suitable size as per existing for fixing of shelves

Shelves made out of 1mm thick PBI sheet as per existing

M&L for carrying out repair and replacement of the following under-mentioned parts of book case by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1028

3mm thick glass pane for fixing in sliding shutter as per existing size

Chromium plated handle of approved design and type

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Shelves made out of 1mm thick PBI sheet as per existing

S&F top of charpoy IP with hard top with 12mm thick plywood BWR grade, commercial, conforming to IS 303-1989 complete all as specified and as directed Note: Reference drawing FD/MAP-II/01

M&L for carrying out repair and replacement of the following under-mentioned parts of charpoy GI pipe with plytop by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-220

S&F 32mm bore medium grade GI tubing as legs in repairs of charpoys as per existing length duly threaded, etc. complete all as shown on drawing , as specified and as directed

S&F GI elbow 3 way, medium grade, suitable for 32mm bore GI tubing complete all as shown on drawing, as specified and as directed

S&F GI check nut, medium grade, suitable for 32mm bore GI tubing complete all as shown on drawing, as specified and as directed

M&L for cutting into size and shape required, threading, etc. defective long rails retrieved hereinabove and converting into short rails of GI charpoys complete all as shown on drawing, as specified and as directed

M&L for cutting into size and shape required, threading, etc. defective short rails retrieved hereinabove and converting into legs of GI charpoys complete all as shown on drawing, as specified and as directed

S&F stiffeners / clamps of MS flat iron 25x5mm to GI charpoys including welding, etc. as required complete all as shown on drawing, as specified and as directed

S&F plywood top, 12mm thick, commercial 7 ply, BWR grade, conforming to IS:303-1989, with 1Nos. MS flat iron 25x5mm stiffeners in cross-sectional direction, drilling holes in plywood for suitably bolting in stiffeners with GI pipe charpoy frame, including suitable nuts, bolts and washers (10Nos.) including tightening of GI frame charpoy complete all as shown on drawing, as specified and as directed

M&L for carrying out repair and replacement of the following under-mentioned parts of chair verandah by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-256

Repairs to damaged chair frame / back frame by cutting and welding not exceeding 20cm long

S&F hard rubber shoe round shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely two coats of synthetic enamel paint (white colour) over a coat of red oxide zinc chrome primer

M&L for removing existing old worn out nylon cane and reweaving with new 4mm thick oval shaped nylon cane of approved quality, in Godrej pattern and off white/cream colour

S&F stiffner made out of MS rod 10mm dia, 460mm long

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining OR sunmica top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-165(M)

Leg / frame 25mm MS square tube upto 100cm long

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

Table top of size 1900x685mm made out of 18/19mm thick pre-laminated particle board (one side decorated face and other side balancing white)

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining OR aluminium top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-165(M)

Leg / frame 25mm MS square tube upto 100cm long

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

Table top of size 1900x685mm made out of 18/19mm thick MDF board duly covered with 1mm thick aluminium sheet with plastic / PVC beading all round

M&L for carrying out repair and replacement of the following under-mentioned parts of table office clerk by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-84(M), FD-1004

Chromium plated 'D' type handle 125mm

S&F suitable drawer / shutter lock with duplicate keys of approved type and design

S&F drawers of table made out of 1mm thick PBI sheet over all size of drawer 350x430mm & 410mm deep duly painted with a coat of pink primer

S&F side of drawer made out of 1.00mm thick PBI sheet, with angle channel and locking device duly painted with a coat of pink primer

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of rack 6 tier / rack 6 tier adjustable by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-106(M), FD-1038

Repair to frame with proper size of MS angle iron length not execeding 10cm including welding

S&F top, bottom and shelves with 1mm thick PBI sheet duly painted with a coat of pink primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/15(R)

S&F top made of 18/19mm thick pre-laminated particle board with wooden beading allround

S&F bottom made of 18/19mm thick pre-laminated particle board

S&F side made of 18/19mm thick pre-laminated particle board with wooden beading

S&F CP handle 100mm long suitable for drawers

Steel telescopic channel of size 25x450mm suitable for drawers (fixed at the center of drawers)

Top side (above back ply) made of 18/19mm thick pre-laminated particle board

Back made of 6mm thick plywood BWR grade

Top drawer made of 18/19mm thick pre-laminated particle board at front and 12mm thick plywood allround

Bottom drawer made of 18/19mm thick pre-laminated particle board at front and 12mm thick plywood allround

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers (set of 4Nos)

M&L for carrying out repair and replacement of the following under-mentioned parts of locker bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1029

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F shutter (single leaf) made out of 1.00mm thick PBI sheet of exiting size

S&F chromium plated MS handle 100mm long as per existing pattern and design

S&F CP hasp and staple of size 150mm

S&F shelves made out of 1.00mm thick PBI sheet of size 485x920mm as per existing

20mm bore steel conduit pipe of existing size

M&L for carrying out repair and replacement of the following under-mentioned parts of Chair CB steel with Arms/without arms by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-75 (M)

S&F of seat

S&F of back

S&F of arms rest made of hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of Chair revolving with arms by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing. TP

S&F of seat

S&F of back

S&F of Hydraulic spring and Jack.

S&F of Wheel

S&F of Leg Base

M&L for carrying out repair and replacement of the following under-mentioned parts of Chair writing (MAP) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing. FD/E6/MAP/12

S&F of seat

S&F of back

S&F of arms rest

M&L for carrying out repair and replacement of the following under-mentioned parts of Shoe Rack Steel by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note:Reference drawing.FD/E6/MAP/02 ( R)

Repair to main frame of rack

S&F of shelves of rack of existing size

M&L for carrying out repair and replacement of the following under-mentioned parts of Table steel 900mmx900mmx760mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note:Reference drawing.FD-1009

S&F of top of size 900mm x 900 mm made out of 18 mm thick pre-laminated particle board and 4mm thick teak wood edging all around top to be provided

M&L for carrying out repair and replacement of the following under-mentioned parts of Table Steel with drawer 900x600x760mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note:Reference drawing.FD-1008

S&F of top of size 900mm x 600 mm made out of 18 mm thick pre-laminated particle board and 4mm thick teak wood edging all around top to be provided

S&F of drawer of table

Removing old existing paint by scrapping and rubbing with sand paper and smoothening surfaces and applying one coat of synthetic enamel paint (of approved tint) for the following as shown on drawings, as specified and as directed

Almirah medium steel (with shelves & 1/2 H x 1/2 S) (FD-1032 & 1034)

Almirah large steel (with shelves & 1/2 H x 1/2 S) (FD-1031 & FD-1034)

Table dining ORs [FD-165(M)]

Table office clerk steel [FD-84(M), FD-1004]

Locker steel (FD-1029)

Rack steel 6 tier / rack adjustable steel 6 tier [FD-106(M),FD-1038]

Table bed side [FD/E6/MAP/15(R)]

Charpoy IP with hard top (FD/MAP-II/01)

Chair CB steel with Arms/without arms FD-75 (M)

Shoe Rack Steel FD/E6/MAP/02 ( R)

Table steel 900mmx900mmx760mm FD-1009

Table Steel with drawer 900x600x760mm FD-1008

M&L for carrying out repair and replacement of the following under-mentioned parts of Steel almirah of size 1900x910x490mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-TP

S&F lock suitable for almirah

S&F CP handle 100mm long suitable for almirah

WOODEN FURNITURE (VAIRENGTE)

M&L for carrying out repair and replacement of the following under-mentioned parts of bed hard by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-246

S&F leg of size 60x60x660mm made out of 1st class hard wood (head rest side)

S&F leg of size 60x60x660mm made out of 1st class hard wood (foot rest side)

S&F long rail frame of size 35x90x1980mm long made out of 1st class hard wood

S&F short rail frame of size 60x60x900mm made out of 1st class hard wood

S&F ply top made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 as approved

S&F stiffiner to support made out of 1st class hard wood of size 40x60x900mm

M&L for carrying out repair and replacement of the following under-mentioned parts of book case by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-237

S&F legs made out of teak wood

S&F long rail of 1st class hard wood (of leg frame)

S&F short rail of 1st class hard wood (of leg frame)

S&F back side 6mm thick BWR grade plywood

S&F top 18mm thick pre-laminated particle board

S&F both side / bottom / partition made out of 18mm thick pre-laminated particle board

S&F shelf made out of 18mm thick pre-laminated particle board with 6mm thick wooden beading at front

S&F shutter made out of 18mm pre-laminated particle board commercial with 4mm thick wooden beading all round with 1No. CP knob of approved design

M&L for carrying out repair and replacement of the following under-mentioned parts of chair wooden bottom w/o arms by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-225

S&F front leg of size 50x50x445mm high made out of 1st class hard wood

S&F rear leg of size 40x65x840mm high made out of 1st class hard wood

S&F front rail of size 25x65x415mm long made out of 1st class hard wood

S&F rear rail of size 25x65x375mm long made out of 1st class hard wood

S&F side rail of size 25x65x400mm long made out of 1st class hard wood

S&F back stiffner 15x50x375mm long (slightly curved) made out of 1st class hard wood

S&F stiffiner of size 20x25x400mm long made out of 1st class hard wood 100mm high from bottom

S&F seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia perforations to be provided to plywood seat as approved

M&L for carrying out repair and replacement of the following under-mentioned parts of chair easy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-229 & FD-1108

S&F front legs of size 55x25x535mm high made out of 1st class hard wood

S&F rear legs of size 55x25x535mm high made out of 1st class hard wood

S&F front rails of size 25x70x520mm long made out of 1st class hard wood

S&F rear rail of size 50x25x500mm long made out of 1st class hard wood

S&F side rails of size 25x70x520mm long made out of 1st class hard wood

S&F lower / upper rail of back rest made out of 1st class hard wood

S&F side rail of back rest made out of 1st class hard wood

S&F of arms of size 65x25x610mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-228 & FD-279

S&F front leg of size 45x45x460mm high made out of 1st class hard wood

S&F rear leg of size 45x65x890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F of side rail of size 30x65x380mm long made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner of size 25x19x400mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-280

S&F front leg of size 55x30x660mm long made out of 1st class hard wood

S&F rear leg of size 55x30x890mm long made out of 1st class hard wood

S&F front rails of seat frame made out of 1st class hard wood

S&F rear rails of seat frame made out of 1st class hard wood

S&F side rails of seat frame made out of 1st class hard wood

S&F back rails of back rest frame made out of 1st class hard wood

S&F stiffiner of size 25x20x450mm made out of 1st class hard wood

S&F arms of size 55x19x495mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of table 3'x2' with drawer or w/o drawer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-283

S&F leg of size 60x30x740mm high made out of 1st class hard wood

S&F short rail of size 20x60x600mm long made out of 1st class hard wood

S&F long rail (with drawer) of size 20x60x900mm long made out of 1st class hard wood

S&F long rail of size 20x60x900mm long made out of 1st class hard wood

S&F drawer as per existing shape & size made out of 1st class hard wood with 1No. CP knob of approved design

S&F stiffiner of size 25x40x600mm long made out of 1st class hardwood

S&F table top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-275

S&F leg 35x55x732mm high made out of 1st class hard wood

S&F top long rail 25x50x790mm long made out of 1st class hard wood

S&F top short rail 25x50x600mm long made out of 1st class hard wood

S&F bottom rail (side/short stiffener) 20x50x355mm long made out of 1st class hard wood

S&F bottom rail (front/long stiffener) 20x50x355mm long made out of 1st class hard wood

S&F cabinet side of table made out of 19mm MDF board commercial with 1mm thick laminated sheet

S&F cabinet back with 6mm ply wood commercial

S&F cabinet bottom of 19mm thick MDF board commercial

S&F cabinet bottom legs of 1st class hard wood

S&F door / front shutter of cupboard as per existing size & shape made out of 19mm thick MDF board commercial with 1mm thick laminated sheet (ofapproved colour and pattern) with 50mm cadmium plated stainless steel hinges and suitable locks (ISI marked)

S&F of drawer as per existing shape and size with 1No. CP knob of approved design

S&F table top of size 1175x600mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (6 persons) MAP by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/03

S&F top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of table center by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-235, FD-274

S&F leg of size 45x45mm at top and 30x30mm at bottom and 372mm high made out of 1st class hardwood

S&F long rail of size 40x19x900mm long made out of 1st class hardwood

S&F short rail of size 40x19x450mm long made out of 1st class hardwood

S&F table top of size 900x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top

M&L for carrying out repair and replacement of the following under-mentioned parts of teapoy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-232, FD-278

S&F leg of size 60x30x532mm high made out of 1st class hardwood

S&F long rail of size 20x60x600mm long made out of 1st class hardwood

S&F short rail frame of size 20x60x450mm long made out of 1st class hardwood

S&F top of size 600x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of peg table by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-277, FD-384

S&F leg of size 30x50x370mm high made out of 1st class hardwood as per existing size & shape

S&F top long rail of size 20x40x450mm long made out of 1st class hardwood

S&F top short rail of size 20x40x300mm long made out of 1st class hardwood

S&F top of size 450x300mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top

Removing old existing polish by washing with caustic soda and rubbing with sand paper and smoothening surfaces and applying two coats of french polish, glossy finish for the following as shown on drawings, as specified and as directed

Bed Hard (FD-246)

Book case (FD-237)

Chair WB W/O arms (FD-225)

Chair easy (FD-229, FD-1108)

Chair dining (FD-279, FD-228)

Chair dining with cushion (FD/MAP-II/04)

Chair writing (FD-280)

Table 3'x2' with drawer / WO drawer (FD-224, FD-231, FD-283, FD-284)

Table writing (FD-275)

Table dining 6 persons ( FD/MAP-II/04)

Table centre (FD-235, FD-274)

Teapoy (FD-232, FD-278)

Peg table (FD-277, FD-384)

Sofa set 5 seater (FD-281, FD/E6/MAP-II/02)

Sofa set 4 seater (FD-281, FD/E6/MAP-II/02)

Removing of old worn out / unserviceable cane from various types of furnitures and re-canning the same with new plastic cane (oval shaped), white coloured, 2mm wide for caning and 4mm wide half round for beading in Godrej pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-229, FD-279, FD-280, FD-1108

S&F in repairs foam cushion 530x560x100mm thick 40 density rubber foam duly covered with marking cloth and tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

S&F in repairs cushion cover to fit over cushion foam of size 530x560x100mm, in tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

STEEL FURNITURE (VAIRENGTE)

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah medium with shelves/Almirah med steel 1/2 H x 1/2 S by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1032 & FD-1034

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 100mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah large with shelves/Almirah large steel 1/2 H x 1/2 Sby removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1031 & FD-1034

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 150mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

M&L for carrying out repair and replacement of the following under-mentioned parts of book case by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1028

3mm thick glass pane for fixing in sliding shutter

Chromium plated handle of approved design and type

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

S&F top of charpoy IP with hard top with 12mm thick plywood BWR grade, commercial, conforming to IS 303-1989 complete all as specified and as directed Note: Reference drawing FD/MAP-II/01

M&L for carrying out repair and replacement of the following under-mentioned parts of charpoy GI pipe with plytop by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-220

S&F plywood top, 12mm thick, commercial 7 ply, BWR grade, conforming to IS:303-1989, with 1Nos. MS flat iron 25x5mm stiffeners in cross-sectional direction, drilling holes in plywood for suitably bolting in stiffeners with GI pipe charpoy frame, including suitable nuts, bolts and washers (10Nos.) including tightening of GI frame charpoy complete all as shown on drawing, as specified and as directed

M&L for carrying out repair and replacement of the following under-mentioned parts of table office clerk by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-84(M), FD-1004

Chromium plated 'D' type handle 125mm

S&F suitable drawer / shutter lock with duplicate keys of approved type and design

S&F drawers of table made out of 1mm thick PBI sheet over all size of drawer 350x430mm & 410mm deep duly painted with a coat of pink primer

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table office officer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-84(M), FD-1003

Chromium plated 'D' type handle 125mm

S&F suitable drawer / shutter lock with duplicate keys of approved type and design

S&F drawers of table made out of 1mm thick PBI sheet over all size of drawer 350x430mm & 410mm deep duly painted with a coat of pink primer

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of locker bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1029

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F shutter (single leaf) made out of 1.00mm thick PBI sheet of exiting size

S&F chromium plated MS handle 100mm long as per existing pattern and design

S&F CP hasp and staple of size 150mm

S&F shelves made out of 1.00mm thick PBI sheet of size 485x920mm as per existing

20mm bore steel conduit pipe of existing size

Removing old existing paint by scrapping and rubbing with sand paper and smoothening surfaces and applying one coat of synthetic enamel paint (of approved tint) for the following as shown on drawings, as specified and as directed

Almirah medium steel with shelves/Almirah med steel 1/2H x 1/2S (FD-1032 & FD-1034)

Almirah large steel with shelves/Almirah large steel 1/2H x1/2S (FD-1031 & FD-1034)

Table office clerk steel [FD-84(M), FD-1004]

Table office officer steel [FD-84(M), FD-1003]

Locker steel (FD-1029)

Charpoy IP with hard top (FD/MAP-II/01)

RK STEEL FABRICATORs (BID ID -3281709)

M/S TAPAN KUMAR RAY (BID ID -3285012)

HINDUSTAN ENGINEERING WORKS (BID ID -3285681)