JJM2022 2023 Arimpur Panchayath Thrissur Dt Shifting Relaying 200mm CI Pipe with 225 mm HDPE Pipe near Chettuppuzha Bridge

Amount

Chettuppuzha bridge supply & laying 225 mm HDPE Pipe :- Working charges

100.98.1008:Engaging Coolie.

OD15261/2022-2023:Trenching the river bed in liquid mud and ordinary soil for laying H D P E pipes upto a maximum depth of 5.5M below water level using diving set and air compressor or using any other scientific method, stacking the excavated soil at convenient place and refilling the trenches after laying pipes including all labour and hire for diving etc, air compressor, country boat and all other appliances & equipments, maintaining the depth of trenches till laying pipes etc. is completed. - Data for 10m3

OD67869/2022-2023:Earthwork in under water excavation for for laying HDPE pipe in ordinary rock and conveying and depositing the spoil within initial lead of 50m and lift up to 1.5m including neat banking.

OD15263/2022-2023::Casting concrete.sleeves as per design with C C 1:2:4 using 20mm broken stone and supplying suitable anti corrossive 'T' bolt and nuts including hire for form work cost and conveyance of all materials watering curing etc:complete

100.10.8:Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 225mm Nominal Outside Diameter Pipes.

OD15267/2022-2023:Engaging divers for removing boulders / logs from the river bed if found necessary during the course of work

OD15273/2022-2023:Fabricating and supplying the 200mm M.S Flanged Spigot Tail Piece 0.50M long making with 200mm M.S pipe made by 8mm thick M.S plate for body and 16mm thick 200mm M.S Flanges welded on one end, including fabrication charges, cutting, welding etc and applying two coat epoxy coal tar paint after a priming coat and all labour charges etc complete

18.31.4.1:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 200 mm diameterClass I

18.59.1:Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):50 mm dia

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

OD15278/2022-2023:Dismantling 200mm Cast iron Double Flanged (Screwed / Welded) Centrifugally (Spun) Pipes without damaging other utilities laid in the handrail of the bridge<br><br>Data derived from 18.73.3 in DAR

10.22:Welding by gas or electric plant including transportation of plant at site etc. complete.

18.66.2:Providing and laying S&S.C.I Standard specials such as tees, bends, collars tapers and caps etc., suitable for flanged jointing as per IS: 1538:Above 300 mm dia

18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia

Cost of materials

100.98.161:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 225mm Outer Dia.

OD104364/2022-2023:Supply of HDPE Coupling suitable for jointing 225 mm (O/D) HDPE pipe

OD15257/2022-2023:LS for soundings at water body portion

Valve chamber - 2 nos

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD15253/2022-2023:Disposing surplus earth from site including loading ,unloading,hire for vehicle etc

OD66818/2022-2023:Supply & Fixing of 600 mm CI heavy duty 100 kg Manhole Cover

Laying MS Pipe

100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.5:Grinding cut and weld edges of 200mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

18.30.5:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:200 mm diameter pipe

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

OD15251/2022-2023:Conveying and laying (screwed/welded) MS pipe excluding cost of pipe and specials 200 mm dia MS Pipes Data derived from 18.71.3 in DAR for 5 m

Fabricating 200 mm MS pipe with 10 mm thick MS plate for Mechanical joints and 'Y' junction

OD15248/2022-2023:Fabricating MS pipes of size 200 mm (ID) using 10 mm thick MS plate including cost and conveyance charges of MS plate,all fabrication charges,charges for painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc complete:For pipes fabricated with 10mm thick MS plate

OD15583/2022-2023:Cutting 200 mm (ID)MS pipes for making bends and other specials by gas cutting including cost of gas all labour and hire charges of tools etc complete . For pipes fabricated with 10m thick MS plate

OD15586/2022-2023:Welding 200 mm (ID)MS pipes for making bends and other specials by gas/electric welding machines including cost of gas and welding rods,all labour and hire charges of tools etc complete.For pipes fabricated with 10 mm thick MS plate

OD15588/2022-2023:Grinding cut and weld edges of 200 mm (ID)MS pipes during fabrication work including all labour and hire charges of tools etc complete.For pipes fabricated with 10 mm thick MS plate

OD15653/2022-2023:Cutting 200 mm (ID)MS pipes for making bends and other specials by gas cutting including cost of gas all labour and hire charges of tools etc complete . For pipes fabricated with 10 mm thick MS plate

OD15656/2022-2023:Welding 200 mm (ID)MS pipes for making bends and other specials by gas/electric welding machines including cost of gas and welding rods,all labour and hire charges of tools etc complete.For pipes fabricated with 10 mm thick MS plate

OD15657/2022-2023::Grinding cut and weld edges of 200 mm (ID)MS pipes during fabrication work including all labour and hire charges of tools etc complete.For pipes fabricated with 10 mm thick MS plate

OD15658/2022-2023:Fabricating MS cleats of size 50x50mm using 12mm thick MS plate including cost and conveyance charges of MS plate,all fabrication charges,charges for welding to main body, painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc complete

100.98.19:Supply Bolts and Nuts 27mm dia 120mm long.

OD15659/2022-2023:Supply of rubber insertion for 200mm dia pipe joint

Construction of Anchor Blocks

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

jafad vj

A AHAMED KUNHI

Bidder Name

A AHAMED KUNHI

jafad vj

Olive Agencies