CWE KOTA/KOTA-45 OF 2019-20 SPECIAL REPAIR TO BLDGS IN DOE AREA AT MILITARY STATION KOTA

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of unreinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame complete all as specified and directed .

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed .

Dismantling timber scanting 40 Sqcm and over in section in any position unframed work, complete all as specified and directed.

Dismantling AC corrugated or semi corrugated sheets/ translucent sheeting in, complete all as specified and directed.

Taking down existing roof treatment including lime concrete/PCC padding over roof, removing complete layer of bitumen under lime concrete/PCC padding, cement mortar & felt cleaning the surface by hacking to receive plaster and removing demolished material outside MD land complete all as specified and directed.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs/PCC tiles in flooring of any description or thickness laid dry and pointed in any mortar complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key scrubbing down with water etc including removing of debris to a distance n.exc 100m and deposited complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Taking up or down steel tubing and connections alongwith bib tap, stop cocks and other fittings including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

Dismantling of 75mm bore cast iron drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore cast iron drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. (Note for item No. 16.00 to 17.00 :- The length shall be measured along the centre line including fittings and accessoires).

M & L for brick work with sub class- B bricks, straight or curved on plan to any radius in half brick thick walls, built in CM in 1:4 complete all as specified and directed.

M & L for PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in foundation, filling under floor etc complete all as specified and directed.

S & F Plain solid, straight chowkhats & frames of IInd class hard wood hollock (Terminiliya Myriocapra) wrought framed rebated on the solid rounded or chamfered, put together with glue & pinned at joint including preparation of back of chowkhat and treated with coal tar complete all as specified and directed.

S&F 35mm thick factory made IInd Class Hard wood panelled door shutters Two panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately)

S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on one side, one face covered with decorative face veneer with lipping/ frame to match etc complete and size of member of shutters as specified in SSR Part-I (2009) section 8 all complete all as specified and directed.

S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, In opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010).

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II.

Taking down shutter of any description exc 1.0 sqm but n.exc 2.0 sqm each, easing and adjusting, refixing builders hardware including removal of unserviceable screws and refixing in same opening complete all as specified and directed.

S & F second class hard wood small fittings such as brackets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exc 200 Cu.cm each complete all as specified and directed.

S&F 100mm long MS butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 75mm long MS butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 50mm long MS butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed

S&F 150mm size aluminium handle, fabricated type anodised complete all as specified and directed.

S&F 100mm size aluminium handle, fabricated type anodised complete all as specified and directed.

M&L for 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy chormium plated with crutch or butterfly handle, fancy type screwed down, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore Angle stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions, complete all as specified and directed.

S&F in repairs 15mm bore Angle cock two way, brass chromium plated, fancy type, fixed to iron pipe or for unions, complete all as specified and directed.

S&F 300mm Helical door spring including roller and roller plate complete all as specified and directed.

Supply and fix continuous (Piano) hinges width of flaps (when open) 40mm, MS, bright finish or electro galvanised complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S&F in repairs curtain rod, fancy type 25 mm dia fabricated out of stainless steel sheet not less than 20 gauge with a pair of stainless steel decorative end knobs (finials) complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as directed.

S & F in repairs galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

M & L for factory made steel windows or ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. Note :- (i) Window size and pattern wherever required and directed shall be suitable for installing Desert cooler. (ii) Glass shall be measured and paid for separately).

M & L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. Note :- (i) Window size and pattern wherever required and directed shall be suitable for installing Desert cooler. (ii) Wire mesh shall be measured and paid for separately).

S&F mild steel framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete all as specified and directed.

M & L for welding in repairs exc 2.5 cm but not exc 5 cm in length for thickness of metal to be welded not exc 6mm complete all as specified and directed.

S&F in repairs 19/20mm thick block board grade-1 quality exterior grade decorative veneer on both faces and alround covered with 6mm thick teak wood beading/lipping fixed with screwed to timber frame complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20mm graded stone aggregates in roof/chajja padding/ benching etc. including necessary form work and finish the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

S & F structural rolled mild steel confirming to Fe 410-W(Gde E-250) quality 'A' as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specifed and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed. (Make :- DURASHINE/ TATA BLUE SCOPE/CRIL)"

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed. (Make :- DURASHINE/ TATA BLUE SCOPE/CRIL)"

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or Hydro Stop manufactured by TIKITAR DANOSA (INDIA) Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete all as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

M & L for water proofing treatment in sunken floors as described hereunder:- (i) Provide 50mm thick PCC 1:1.5:3 type A-0 using 10/12.5 mm graded stone aggregates laid over slab of sunken floor after applying cement slurry for filling undulations finished fair and even without using extra cement (i) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick cement plaster in mortar 1:4 mixed with water proofing compound @ 3% by weight of cement. (ii) Preaparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or Hydro Stop manufactured by TIKITAR DANOSA (INDIA) Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, (weight not less than 150 gms/sqm) with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and the joints sealed properly all as per manufacturer’s instructions, and providing a cushion layer of coarse sand of thickness 25mm to protect polymeric membrance complete all as specified and as directed. Note: (i) Polymeric membrane shall be laid in sunken floor and on sides upto finished floor level (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing compound shall be measured and paid separatgely).

M & L for brushing with neat slurry @ 3 Kg per sqm area mixed with integral water proofing compound complete all as specified and directed. Note:- WPC shall be measured and paid separely under repsective items)

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, over 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L for matt finish, joint less, coloured light shade vitrified ceramic tiles (square/rectangular), 10 mm thick (Premium quality), area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match with shade of the tiles & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L 18-20 mm thick machine cut Kota stone slab flooring not less than 0.36 Sqm over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L 20 mm thick granite slab/tiles (of any type table rubbed and polished) in steps jambs pillars, window cills, cooking platforms over screed bedding layer of mortar 10mm thick in cement mortar 1:6 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type E-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M & L for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15650-2008 of 60mm thickness, M-35 grade with grey cement and no pigment laid over and including 25mm thick compacted sand cushioning layer etc complete and filling of joints with screed sand and vibrated with mechanical complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately under respective item).

M&L 15mm thick rendering in cement mortar 1:6 on stone masonry surfaces or on other than fair faces of brick masonry over dubbing out cement plaster 5mm thick in CM 1:4 finish surfaces even and smooth without using extra cement complete all as specified and directed. Note :- Plastering (if ordered) after dubbing out shall be measured & paid for under respective item.

M&L 5mm thick rendering in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and fair complete all as specified and directed.

M&L for glazed ceramic tiles coloured 350x450 or 250x450 (7-8mm) thick (square / rectangular), as in vertical surfaces such as skirting, dado set, risers to step etc and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for preparing old or previously treated walls surfaces and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall/roofs and applying three coats of weather coat paint including necessary preparation of surfaces as per manufacturers instruction complete all as specified and directed. Make : ASIAN PAINT/ BURGER.

M & L for preparation of newly plastered surfaces of wall and applying two coats of distemper (oil emulsion) over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)

M&L for complete removal of existing treatment on walls, chajjas etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L for preparation of old or previously treated painted wooden or wood based surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint ocomplete all as specified and directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Product Code & Make :- PRAYAG or equivalent).

S & F in repair 15mm bore wall mixture chromium plated Hot & Cold, bright finish with three joints screwed the ends fro iron pipe and plugging complete all as specified and directed. Make:- Plumber/ Jaguar or equivalent.

S & F in repair 15mm bore basin mixture CP hold & Cold, bright finish the ends for iron pipe complete all as specified and directed. Make:- Plumber/ Jaguar or equivalent.

S & F 15mm bore brass chromium plated fancy type Bidet spray (Hand Jet) with flexible tube complete all as specified and directed. (Product Code & Make :- Cat Part No U-1904 of PLUMBER or equivalent model of JAQUAR/KOHLAR/Roca)

S&F in repairs 125mm size shower rose, chromimum plated with swivel joints, fixed, complete all as specified and directed.

S & F in repairs towel ring chromium plated complete all as specified and directed.

S & F in repairs soap dish oval type chromium plated brass alloy, any type, fix to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Note : PVC tanks shall be ISI marked and having two layers)

S&F in repair 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Note : PVC tanks shall be ISI marked and having two layers)

S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs CP grating doom 100 mm dia with hole to insert waste pipe of size 32/40 mm dia complete all as specified and directed.

M & L for sand filling under floor or in foundation including watering and consolidation, complete all as specified and directed.

S & F 75mm bore cast iron(sand cast), soil, waste and vent pipe in any length with or without ears with cement joints on walls, laid in floors/trench complete all as specified and directed.

S & F 100mm bore cast iron(sand cast), soil, waste and vent pipe in any length with or without ears with cement joints on walls, laid in floors/trench complete all as specified and directed.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest (any pattern) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., (excluding flushing cistern and flush pipe etc) and including making good to floor as existing complete all as specified and directed.

S&F in repairs plastic seat and cover for pedestal pan white closed pattern with flat bottom and cover mil steel chromium plated fixed complete all as specified and directed.

S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with superior quality water jet including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F in repairs flushing jet for pedestal pattern WC including flexible pipe and brass chromium plated nuts, complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S & F in repairs chromium plated toilet paper holder complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of size 900mm x 1000mm x 200mm fabricated out of Ist quality 0.6mm thick stainless steel sheet complete all as specified and directed.

S & F in repairs Kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 600mm x 450mm bowl size 490mm x 350mm x 200/220mm complete all as specified and directed.

S & F in repairs PTMT alloy bathroom cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. (Cat Part No. 551 of Make Prayag or equivalent model of other makes as approved by Garrison Engineer).

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

E/M PORTION Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings (except tube light fitting) etc but excluding ceiling fan and removal of old material from site (except fittings to be reused) and making good disturbed surfaces of walls, floors ceiling etc complete all as specified and directed to match with existing surfaces.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed.

Taking down old unserviceable tube light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed to match with existing surfaces complete all as specified and directed.

Taking down the existing unserviceable submain/service connection wiring any size and any description including teak wood battens or conduits all as specified and directed.

Taking down and re-fixing existing Exhaust/Ceiling fan any type and size after servicing, greasing and re-painting at same location and making good disturbed surfaces of wall, ceiling etc complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping double locked box type with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per IS with MS concealed terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite (Hylam) sheet top cover for mounting switches, sockets, regulators, bell push etc, including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch.

One ceiling fan/exhaust fan point.

One 5 Amps socket outlet on independent board.

One 5 Amps socket outlet on same board.

M & L for point wiring complete for 15 Amps socket outlet on independent board with 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping double locked box type with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per ISS with MS concealed terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite (Hylam) sheet top cover for mounting switches, sockets, including 4.00 Sq.mm multistranded copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly.

S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed.

S & F, switch piano flush type single pole one way 15/16 Amps, 240 volts all as specified & directed.

S & F, socket outlet 3 pin, 5/6 Amp flush type, 230 volts all as specified & directed.

S&F, socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp flush type all as specified & directed.

S & F ceiling rose, three terminal, PVC / poly carbonate isolated body, complete all as specified and directed.

S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F electronic fan regulator, step type, socket size, 80 Watt complete all as specified and directed. Make: Legrand/ Anchor/ Usha

Supply and fix LED 4000 K tube light fitting 1x22watt (4 feet long) box type complete with standard fittings like polyester filled ballast, lamp holder, starter holder etc pre-wired including power factor improvement capacitor and including tube and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core 2 to 3 metre long and connected complete all as specified and directed. Make : Cat Part No LHEWEBP 6PL1W022 of make Havells or equivalent model of make Philiphs/Crompton.

Supply and fix LED Mirror light fitting, 600mm long, 05 Watt with all standard fittings etc pre-wired including LED tube and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No LCL-05-CDL of make Crompton or equivalent model of make Havells/Wipro/ Philips/Bajaj}.

S & F sheet metal enclosure double door DB SPN 04 way, 415 volts protection class IP-30 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F sheet metal enclosure double door DB SPN 12 way, 240 volts protection class IP-30 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F MCB SPN 63 Amps, 230volts, B-curve rupturing capacity 10 KA conforming to IS-8828-1996, IEC-60898, complete all as specified and directed.

S & F, MCB SP 5 to 32 Amps, 230 volts, B-curve, rupturing capacity 9KA conforming to IS-8828-1996, IEC-60898, complete, all as specified and directed.

Re-use of serviceable DB's single pole and neutral 4 way with 200A rated bus bar 240 volts, complete all as specified and directed.

Re-use of serviceable metal sheel enclosure for DB's, single pole and neutral 12 way with 200A rated bus bar 240 Volts complete all as specified and directed.

M&L for submain wiring with 2 single core PVC insulated & unsheathed FRLS cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit fixed on surface to wall/ ceiling by means of MS screws and saddles including one run of 4 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, all as specified and directed. Note: - Two runs of cable, PVC conduit and earth continuity conductor will be measured and paid as one length only)

ONKAR ENGINEERS

K B Enterprises

L P Singh and Co.

Pioneer Enterprises

TARKESHWAR DASS CONSTRUCTION COMPANY

ANNAPURNA ENTERPRISES