Construction of NTPHC at Nambla Uri (Balance work plus Electrical work).

Labour charges for clearing of site (inside building) by way of removing dust and other unwanted material and disposal of same as directed.

Structural steel work welded in built up sections, trusses and framed work incl cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of CGI sheets roofing including vertical/curved surface fixed with Jor L hooks (0.50mm thick)

Providing ridges/hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.50mm thick incl carriage complete.

P/F of plain eves boarding 300mm x 400mm nominal size imported kail wood incl cost of nails complete.

Providing and placing on terrace (at all floors) Water storage tanks incl all fittings complete.

P/F of marble work gang saw cut (polished and machine cut) of thickness 18mm over a bed of 15-20mm thick cement sand mortar in 1:3 mix of required shade excl cost of moulding etc complete job.

P/F ceramic floor tiles 300x300mm in cement sand mortar in 1:4 cement sand mix (Somany/Kajaria make) complete job.

P/F ceramic glazed wall tiles in cement sand mortar in 1:3 cement sand mix commercial grade of standard make etc complete job.

P/F vitrified floor tile 600x600mm laid over a bed of 15-20mm thick cement sand mortar in 1:3mix of standard make (Kajaria, Somany, RAK) etc complete job.

Earthwork in trench excavation by mechanical means including dressing of sides and ramming of bottom disposal lead upto 1mtr etc complete.

Providing and laying of stone soling (hand packed) in foundation trenches incl ramming etc complete job.

P/L of cast in situ cement concrete M-7.5 grade (1:4:8 mix) (40mm nominal size crushed stone agg) upto plinth level including curing but excl cost of form work.

P/L of cast in situ cement concrete M-10 grade (1:3:6) (40mm nominal size crushed stone agg) upto plinth level including curing but excl cost of form work.

P/L of cast in situ reinforced cement concrete M-20 grade including curing but excl cost of form work and steel etc complete job.

P/L of high strength deformed steel bars Fe415 including cutting bending and fixing in position complete. (including cost of binding wire).

Brick work in super structure in (1:6 mix) 1cement 6sand mix mortar using 2nd class burnt bricks etc complete job.

Providing 15mm thick cement sand plaster in 1:6mix mortar in ceiling etc incl curing etc complete job.

P/F of 32-35mm thick panelled /glazed door window and ventilator shutters of imported kail wood/silver wood (commercial grade) excl cost of hinges and glazing /panelled material but incl labour for the same.

P/F of 35mm thick wire guage shutters of imported kail wood/silver wood (commercial grade) completed but excl cost of hinges complete job.

P/F of 12mm thick prelaminated ply board decorative on both sides as panelling material for door shutters complete job.

Finishing walls with 2mm thick of POP of standard quality to give a smooth finish etc complete job.

Finishing walls with wall putty of standard quality to give a smooth finish etc complete job

Finishing walls with 2 or more coats of washable distemper on wall and ceiling etc of standard brand and manufacture etc complete job.

Finishing walls with 2 or more coats of excel on exterior walls etc of specified brand and manufacture incl a coat of priming etc complete job.

Finishing 2 or more coats enamel oil based paint on woodwork of standard brand andrequired shade incl primming coat etc complete job.

P/f of 3.5mm thick ordinary sheet glass pans, panelling material to window and ventilator shutters excl cost of beading (to be paid separately) completed job.

P/F of wood work in framework/ ceiling joists for soffit or like work etc of budloo wood or equivalent complete job.

P/F of aluminium hardware goods to doors and windows of standard quality etc complete job.

Hinges 3"

Hinges 4"

Tower bolts 4"

Tower bolts 6"

Handles 4"

Handles 6"

L drops 12"

Providing edge moulding to 18mm thick marble stone counters vanities etc incl machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in Charge (marble work).

P/F of 20-25 mm thick (semi polished) kota stone slabs of standard quality over a bed of 15-20mm thick cement sand mortar in 1:3mix incl rubbing curing polishings to edges to give high gloss finish etc complete job.

P/F of PVC soil /waste/ventilating pipes of Prince or equivalent approval make fo following size

75mm dia

100mm dia

P/F of PVC pipe fittings of Prince or equivalent approved make of following size to soil/ waste/ ventilating pipes.

10mm dia

P/S trap

Door tee

Door bend

Plain bend

Reducer (100x75)mm

Collars

Stays and clamps

75mm dia

Floor trap

Plain bend

Collars

P/F G-I pipelines to walls/ ceiling/ floors including cost of pipes (light grade of specified mass) (Prakash surya) GI fittings, clamps, jointing., testing

75mm dia

20mm dia

P/F GI pipe fixtures of specified brand ISI mark Nike incl testing and commissioning of following size

20mm dia fittings

Elbow

Nipples

Unions

Ball/Gate valve

Tanki nipples

15mm dia fittings

Elbow

Nipples

Unions

Ball/Gate valve

Tanki nipples

P/F of CP fixtures of Cera/Jaguar Escco/ Essel or equivalent make commercial grade including jointing testing and making good the surface.

Bib cock long body

Angle valve/stop cock

CP connection 18"

CP nipples 1'1/2''

Sink 24"x18'' outer

Wall mixer

Basin mixer

Sink mixer

CP waste pipe

CP waster coupling

Mirror

CP grating

Soap case

P/F of water closet (Indian type WC pan) of cera or equivalent make, commercial grade to complete job plus Cistern.

Construction of inspection chambers of brick masonry (1'x1') internal dimensions of specifid for single pipe lines inluding flooring of M-150 & manhole cover complete job.

P/F of PVC water storage tanks double layer (sintex) of specified brand complete job.

P/F of water heater (gysers) of venus/ classic/racold/ jaguar or equivalent make of 50 ltrs etc complete job.

P/F of wash basin with pedastal or counter based as per requirement (hindware/cera or equivalent make) commercial grade of required shade etc complete job.

P/F 0.50 hp water motor of approved quality (crompton/kirloskar or equivalent make)

P/F of 10mm thick plywood/board for ceiling/partition of walls etc incl nails etc complete but excluding frame works.

P/F of stainless steel railing 14guage of standard sections and approved standard quality incl cost of all necessary fittings complete.

P/F of stainless master baluster of standard height and approved quality incl cost of all necessary fittings complete.

Random/rubble stone masonry with quarry stones laid dry incl carriage complete

Electrical Part

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box etc. as required.

Providing Installation testing and commissioning of Ceiling Fans of approved brands with connections etc as required

Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply,installation,testing and commissioning of Ceiling LED Down Light 12 watt day milky fitting with connections as required.

Providing and fixing of Batten Holder/ Angle holder including connections as required.

Providing and fixing of 9 watt LED Bulb

Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 200 mm(8") in the existing opening including connections,testing commissioning etc as required

Supplying laying & making outdoor connections including aluminium lugs and other jointing materials for 3.5X 50 sqmm LT Power Cable ,Almunium Conductor, ARMOURED

Supply ,instalation,fabrication and commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size 3X4 rft . a)Providing and fixing od 300 amp TPN A1.Bus bar with required No. of thimbles etc (2 No) b)100 amp 4 pole MCCB with breaking capacity c)100 amp 4 pole change over switch d)630/ amp TPN 08No.) e)VSS meter/switch f) ASS meter/ switch g)CTs 200/5 amp rating h) 32 Amp DP MCB (04 No.)

Supplying and fixing of following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 24) double door

Supply & Fixing following size TPN

63 amps TPN

40 amps TPN

Supply & Fixing following size DP MCB

63 amps DP

Supplying and fixing of 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit ( including conduit) etc. as required.

2 x 1.5 Sqmm

2 x 2.5 Sqmm + 1 x 2.5 sqmm

2 x 4 Sqmm + 1 x 4 sqmm

4 x 6Sqmm + 2 x 6 sqmm earth wire

4 x 10Sqmm + 2 x 6 sqmm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING points etc. as required.

3 Module (200mmX75mm)

6 pin 15/16 A socket outlet & 15/16 A switch

Supplying and fixing following 5 pin 5/6 A modular switch /socket on the existing modular plate & swich box including connections etc. as reqd.

Disposal of unwanted Mulba/ material from the site of work including Chiselling & repairing wherever required

Chemical earthing

Providing ,installation,testing and Commissioning of 50 watt LED Flood light with connection etc as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.