Up-gradation, Improvements & other related work at Belagola Pump house, Mysuru Zone (2nd Call)

Up-gradation, Improvements & other related work at Belagola Pump house, Mysuru Zone (2nd Call)

125HP Pumpset : Pumps: Supply & delivery at site brand new, best efficient make approved by the Board horizontal split case centrifugal pump conforming to the latest Pump Model SCP-125-460-DS and the...

FOOT VALVE: Supply and fixing suitable size minimum 250 mm or suitable dia Kirloskar/ Ventil/ Jupiter foot valve of any Board approved make with all lead and lifts complete as per specifications and ...

Pressure Gauge: Supply and delivery at site Air master/ Gurusons/ Forbes Marshal make glycerine filled Stainless steel pressure gauge of 250mm dia or suitable dia for the above pumpsets with nipple, s...

Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

CONTROL SWITCH GEAR ACB PANEL for 125HP:CONTROL SWITCH GEAR PANEL - 125 HP :Supply and delivery at site brand new any Board approved make floor mounting, free standing, cubicle type control panel boar...

FCMA softstarter - 125 HP:Supply & delivery of 125HP /90KW soft starter based on Flux compensated magnetic amplifier technology for smooth starting by torque control and reduction in starting current ...

Automatic Power factor control panel:-Supply, delivery, fixing and commissioning at site brand new Board approved make or any other make approved by the Board floor mounting, free standing, cubicle ty...

Erection of Starters:Formation of suitable foundation CC 1:2:4 using all the required materials such as cement, sand, jelly etc., complete and erection of starters on the above foundation using the re...

Erection of Control panels, pumpsets and starters on CC foundation including formation of CC foundation in CC 1:2:4Erection of Control Panel Board on CC foundation including formation of CC foundation...

Erection of pumpsets: Formation of suitable block machine foundation in CC 1:2:4 confirming to the latest ISS 2974 using all the required materials such as cement, sand, jelly etc., complete including...

Cable Terminations: Termination of cable using Aluminium lugs to the terminal end for solderless crimping to aluminimum conductors by adopting crimping tool for all connecting equipments and panel boa...

Desilting :Removing/ Desilting of muddy soil accumulated in the Jackwell/ sump tank using necessary toos and plant using desilting pump and JCB etccomplete with all lead and lift etc, as per specifica...

Dismantling of Control panels, pumpsets and starters: Dismantling of exsisting 125HP Control panel and starters including Removing the rushed/damaged bolt nuts by using gas cutting, chipping wherever...

LT Kiosk - Outdoor Type : - Incoming 630A 4P 50kA MDO ACB with LI releases, S/T & safety shutters, Auxilary contact 4NO+4NC, Shunt Trip coil 230V AC, Electric motor including RYB Indicating Lamps 230...

Providing Compact RMU 11 kV Class SF6/VCB Type (1 OD) RMU 1 OD, 350 MVA, complete with all lead and lift etc, as per specification and direction of Engineer in charge. 630 Amps

Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing, complete with all lead and lift etc, as per specification and direction of Enginee...

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., complete with all lead and lift etc, as p...

Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...

Supply and filling to top up of New uninhibited Natural Ester insulating oil conforming to IEC 62770 (latest version) for filling of tanks, radiators & OLTC at proper level including 10% extra oil for...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required, complete with all lead an...

Painting of Fence :Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cl...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., Work shal...

Painting of Transformer:Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, greas...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...

Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification.complete with all lead and lift etc, as per specification and direction of Engineer in charg...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all lead and lift etc, as per specification and direction of Enginee...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mmdia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment son the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit. The pit should b...

Supply & Fixing GI/Copper strips for grounding connections, using necessary fixing materials as required, 50x6 GI strip, complete with all lead and lift etc, as per specification and direction of Engi...

Supply & Fixing GI/Copper strips for grounding connections, using necessary fixing materials as required, 50 x 6 mm Copper strip complete with all lead and lift etc, as per specification and direction...

Supply of Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 M Long...

11 kV, 5 KN Polymeric Pin Insulator (24 ‘‘ D'‘

FRP Rod), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

11 kV, 45 KN Polymeric Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

70/90 kN Disc Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Distribution Transformer-3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star), complete with all lead and lift etc, as per specificati...

Supply of Earthing materials pipe type for grounding (Single Electrode with accessories), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of Caution / Danger Board, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Anti - Climbing Device (12mtrs/1kg G.I. Barbed Wire) Lumsum complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymetic Type with ground disconnector, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV, HG Fuse Unit with Solid Core Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV, 400 Amps Double Break GOS, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of H - Frame Set for fixing 11 kV, 400 Amps Double Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS, complete with all lead and lift etc, as per specification an...

Fixing of Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 M Long...

Erection of Transformer & Structures : Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star) Erection of 200 ...

Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of Caution / Danger Board complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of Anti - Climbing Device (12mtrs/1kg G.I. Barbed Wire) Lumsum complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymetic Type with ground disconnector, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of 11 kV, HG Fuse Unit with Solid Core Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of GOS including wiring (11 kV Double Break 400 Amps), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of H-Frame for mounting GOS, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Dismantling of Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 M...

Releasing and refixing Insulator of 11 kV Pin Insulator, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Releasing and Refixing Insulator of 11 kV Dead End Insulator Disc, Strain etc, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of 11 kV, 3 Core, XLPE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 400 Sqmm, (51 GI Wires -...

Laying of 11 kV, 3 Core, XLPE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 400 Sqmm, (51 GI Wires - 4 ...

Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable, complete with all lead and lift etc, as per specification and direction of Engineer ...

Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable, complete with all lead and lift etc, as per specification and direction of Engineer...

Fixing of Heat Shrinkable Indoor/Outdoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable, complete with all lead and lift etc, as per specification and direction of E...

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

LT Cable a)120 to 240 Sqmm, complete with all lead and lift etc...

Supplying Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 240 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable 240Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Insulation Tester Digital type (Megger) :

2.5 kV - 5 KV, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Ring spanners : 12 nos. per set, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Tube Spanners : 12 nos. per set, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Box spanners : 12 nos. per set, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Double end spanner : 12 nos. per set, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Insulated cutting pliers : 12 inches size, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Line live tester, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Screw driver : 18 inches size, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Screw driver : 12 inches size, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Multimeter electronic type, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Allen keys, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Hand Operated Crimping Tool 25 Sqmm to 400 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Telescopic Earthing Rod, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose, complete with all lead and lift etc, as per specification and directi...

Supply, installation of 1kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 2.3 Kg, empty weight 1.3 Kg, Can Height 298mm, Diameter 86.50mm, Dis...

Supplying of four bucket stand alongwith buckets, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery, Fire fighting, complete with all lead and lift etc, as per ...

Street light: Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resisti...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable, a)2.5 to 25 Sqmm, complete with all lead and lift etc...

Supplying Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge. Up to 2.5 to 25 Sqmm.

Fixing Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge. Up to 4C x 50 Sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Fabricating, supplying and erection of 9 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includ...

Supplying and fixing hot dip galvanized M.S. bracket suitable for outdoor luminaries and mounted on octogonal pole using necessary bolts, nuts etc., complete with all lead and lift etc, as per specifi...

Supply of LED Streetlight luminaries with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyc...

Fixing Halogen/metal hallide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires, complete with all lead and lift etc,...

Supplying Heavy Duty Copper Terminal Long Barrels 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.