Construction Work of Chief Officer Quarter at TPS No: -04, FP No 113, Bardoli, Di- Surat Under 15th Finance Commission Grant Year 2022-23 (Untied).

NAME OF WORK :- CONSTRUCTION WORK OF CHIEF OFFICER QUARTER

LOCATION :-TPS NO:-04, FP NO 113, BARDOLI, DI- SURAT

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5M depth including sorting out

and stacking of useful materials and disposing of the excavated 147.20 ₹ 123.13 Cumt. ₹

stuff up to 50M. Lead (A) Loose or soft soil

Excavation for foundation 1.5M to 3 mt depth including sorting

out and stacking of useful materials and disposing of the excavated 54.08 ₹ 136.47 Cumt. ₹

stuff up to 50M. Lead (B) Loose or soft Soil

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse

sand : 6 hand broken stone aggregate 40mm nominal size ) and

curring complete excluding cost of formwork in (a) Foundation

Earthwork for embankment including breaking clods, dressing

with all lead and lift (excluding watering and consolidation) (C) 126.60 ₹ 157.91 Cumt. ₹

From Borrow area within 1.0 Km.lead

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by

ramming and watering.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundation

footing base of column and mass concrete

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and exluding the cost of

reinforcement for reinforced concrete work in Beam (C) Slabs, 28.40 ₹ 6,433.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Lintel (C) Slabs, 7.00 ₹ 6,031.72 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Chhajja (C) Slabs, 0.80 ₹ 6,821.54 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level.

Item No. & Description Quantity Rate Per Amount

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Column (D) 18.30 ₹ 7,480.06 Cumt. ₹

Columns, Pillars posts and struts upto floor two level

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Slab (C) Slabs, 45.80 ₹ 6,811.44 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level.

Providing & Laying controlled cement concrete M-200 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Stair Case (E) 5.70 ₹ 6,980.11 Cumt. ₹

Staircases excluding landing up to floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto 10413.00 ₹ 77.29 Kg. ₹

floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:5 (1- Cement : 5 -coarse sand) in foundation and plinth 169.60 ₹ 618.79 Sqmt. ₹

Extra for half brick masonry in superstructure above plinth level

upto floor two level. (B) Conventional

Providing 15 mm thick cement plaster in single coat on fair side

brick/concrete wall for interior plastering up to floor two level

finished even and smooth in with Floating coat of neat cement. (i)

cement Mortar 1:3 (1 cement : 3 Sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 316.40 ₹ 148.66 Sqmt. ₹

sand) Extra over items 58 to 64 for finishing with a floating coat of

neat cement slurry.

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick backing

coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick 466.70 ₹ 347.42 Sqmt. ₹

finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar 1331.00 ₹ 40.59 Sqmt. ₹

dropping and other foreign matter and sand papered smooth.

Item No. & Description Quantity Rate Per Amount

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from 864.30 ₹ 83.36 Sqmt. ₹

mortar droppings and other foreign matter and sand papered

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and laying Dark Telephonic Black Granite Slab 1 side

Polished 18 mm thick in Door, Window risers of steps , skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement

: 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing

Providing and laying white glazed tiles 6mm thick in skrting risers

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 138.80 ₹ 900.29 Sqmt. ₹

coarse sand) and jointed with white cement slurry

Providing and laying broken China Mosaic Flooring for Terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar crème out upto surface using white cement including 121.40 ₹ 779.70 Sqmt. ₹

rounding off junctions and extending them up to 15cm. along the

wall, clearing with water and oxalic acid etc. as directed.

Extra for providing and mixing water proofing material in Cement

concrete in mix proportion recommended by the manufacturers. 36.50 ₹ 49.16 Lit/Kg. ₹

Providing wood work in frames of Doors, windows cleare story

windows and othersimilar works wrought, framede and fixed in 46.00 ₹ 610.23 Cudm. ₹

position. (A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face

veneer or plywood face panels, including anodised alluminium butt

hinges with necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush door shutters

(2) 35 mm thick.

Item No. & Description Quantity Rate Per Amount

Providing and fixing FRP frame size 100x50 mm and 28mm thick

FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also 11.50 ₹ 2,377.76 Sqmt. ₹

taking hinges & fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm 36.80 ₹ 1,583.95 Sqmt. ₹

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire

including roughening,cleaning, fixing and finishing in cement

mortar 1:3 and curing complete. (D) 75mm thick

Supply and installation of Black Finish Glass Railing Work

including 12mm thick clear Toughened Safety Glass (machine-

polished and slope-cut), high-grade SS 304 or heavy MS square

posts and top handrail with premium Matte Black Powder Coating

finish, heavy-duty bottom U-profile base channel/skirting, high- 10.80 ₹ 7,575.00 Sqmt. ₹

tensile anchor fasteners, non-aging EPDM rubber gaskets, and

structural clear silicone sealant, all-inclusive of material,

transportation, wastage, and expert installation at all levels,

completed in all respects as per the drawings and direction of the

Engineer-in-Charge

Supply and installation of Frameless Glass Shower Partition inside

toilets to separate wet and dry zones, including 12mm thick clear

Toughened Safety Glass conforming to IS 2553 standards, with all

edges machine-polished; fixed securely using high-grade Stainless

Steel (SS 304) wall-to-glass clips/channels, non-aging EPDM

rubber gaskets, and sealed watertight using anti-fungal, structural- 29.90 ₹ 3,282.50 Sqmt. ₹

grade clear silicone sealant to prevent leakage, all-inclusive of

material, transportation, wastage, and expert labor, completed in all

respects as per drawings and direction of the Engineer-in-Charge

Item No. & Description Quantity Rate Per Amount

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws. (B) ORNAMENTAL GRILL

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with brushes 36.10 ₹ 36.74 Sqmt. ₹

fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including 36.10 ₹ 92.20 Sqmt. ₹

cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of 300mm

x 300mm size (inside) with standard weight.(i) Square mouth traps.

(A) 100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- 4.00 ₹ 2,932.93 No. ₹

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and 5.00 ₹ 1,356.81 No. ₹

cover to be measured and paid for separately) (A) vitreous China

Pattern :(i) in white colour

Item No. & Description Quantity Rate Per Amount

Providing and fixing 12.5 Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete with fittings such as lead

valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia. 5.00 ₹ 2,370.39 No. ₹

porcelain enamelled flush bend including cutting holes in walls

and making good the same connecting the flush bend with cistern

and closet (overflow pipe to be measured and paid for separately)

(A) Vitreous China (I) In white colour

Providing and fixing G.I. inlet connection for flush pipe with W.C.

Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic 5.00 ₹ 291.33 No. ₹

seal and cover.

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous 5.00 ₹ 1,533.32 No. ₹

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making good the

same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x

450mm x 150mm size

Providing and fixing C.P. brass waste for washbasin or sink. (A)

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (ii)

Providing and fixing C.P. brass shower rose with 15mm or 20mm

inlet. (A) 100mm dia. Each

Providing erecting and fixing double coated (ISI) water tank of

required capacity each with all necessary fittings and connection 3000.00 ₹ 3.95 Liter ₹

etc. complete on terrace.

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

110mm Dia. Bath Pipe 40.00 ₹ 878.57 Rmt. ₹

Item No. & Description Quantity Rate Per Amount

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the 40.00 ₹ 834.38 Rmt. ₹

size 160 mm diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Item No. & Description Quantity Rate Per Amount

SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size

610x460 mm & bowl size 560x410x200

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating

and filling brickbats with dry masonry work at top for 45cm.

height including covering the top with stone including providing 1.00 ₹ 3,457.27 No. ₹

vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick 91.00 ₹ 472.68 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Point wiring for Independent 6/16 plug and 16A with 2- 4 sq. mm

& earth wire of 2.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick 14.00 ₹ 712.05 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency

> 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/RecessedMount Downlight

with provision for spring loaded mounting clips complete.IP20, 50.00 ₹ 758.51 Each ₹

(iv) 22-24 watts, Surge-2 KV, Catt-III

Supplying and erecting approved make oscillating type medium

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal over load protection wall mounted with height adjustment

and rotary tilting device complete with guard, pull cord for

speedand oscillation flexible Core plug top complete erected with

lead wires as directed. (a) 450mm

Item No. & Description Quantity Rate Per Amount

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square 6.00 ₹ 1,366.53 Each ₹

frame. 200mm with 1350 RPM Cat.II

Providing and fixing 0.90 mt height stainless (304 Grade) steel

stair railling by top rail of 50mm dia.x16G pipe providing vertical

support of 32x32 Sq. x 16G Pipe and Hori. Supports Pipe of 16mm

x 16G 4 No. Row including grinding, cleaning and filling the 22.10 ₹ 6,470.06 Rmt ₹

welded spots with SS finish and including of labour transportation

loading, unloading and all tex etc. complete.

Drilling of 300/315 mm dia bore in all strata including dual over

burden strata by combination DR/DTH rig including lowering of

204mm dia uPVC 225/250mm dia PVC/MS casing pipes up to

required depth and further drilling of 200mm dia borehole in all

types of Alluvial Rocky strata formation by DTH Rig including

flushing of bore hole by air compressor and measuring of yield of 20.00 ₹ 1,423.09 Rmt ₹

bore by V notch and fixing of bore cap etc. components. Rates for

item No. 3.10-E-1 is applicable mote than 12 mtr. coming only

otherwise less than 12 mtr casing it will be considered as per item

No. 3.10- E-2 (size 200 mm)

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, transportation, freight charges,

octrol, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing material etc.

1.One coupler / ring shall be provided with each full length pipe

cost of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

3. Rate for PVC Resin as Rs. 91739/MT (Price Without GST)

Supply,Fixing , Installation and Testing of 1 HP (0.75 kW) Single

Phase Self-Priming Centrifugal Monoblock Pump Set with 100%

Copper Winding, High-Head Efficiency, including Cabling Stater/

Mcb Panel and All necessary Plumbing Fitting Complete. and 3- 1.00 ₹ 5,555.00 Nos ₹

Year Manufacturer Warranty, complete as per the technical

specifications and instructions of the Engineer-in-Charge.

Providing and laying & placing marble Slab for kabat 18 mm thick

laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to match 111.60 ₹ 1,653.37 Sqmt ₹

the shade of slab including rubbing and polishing etc. complete.

Total Amounts Rs……….. ₹

Total Amounts Rs……….. ₹

Say Amount Rs……….. ₹

Item No. & Description Quantity Rate Per Amount

I/We am/are willing to carry out the work @ ________% Above Below __________ Percentage (should be

writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 47,87,914.00 Put to Tender Rs.

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Bardoli Nagarpalika

Chief Officer President

Bardoli Nagarpalika Bardoli Nagarpalika

Bardoli Bardoli