GEJM-60/2019-20

Amount

Demolition of cement concrete reinforced in any description and removing unserviceable material to a distance exc 100 mtr complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware) of internal dia of pipe 150 mm set in cement mortar incl removing from site to a distance n. exc 500 mtr complete all as specified.

Dismantling PVC /Cement/CI pipes 75 to 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed.

Dismantling of mild steel or wrought iron work of any description not otherwise provided for complete, complete all as specified.

Dismantling water tanks and removing to store of water storage tanks (cap 250 ltr to 500 ltr) complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each, complete all as specified and as directed by Engineer-In-Charge.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each, complete all as specified and as directed by Engineer-In-Charge.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking up or down steel tubing of 15 mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

Taking up or down steel tubing of 20 mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing all the demolished material outside Cantt area complete all as specified.

Taking down cement plaster of any description on brick wall including racking out joints, hacking for key, scrubbing down with water and removing all the demolished material outside cantt area complete all as specified and as directed.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

Disconnecting existing tanks, 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified.

Taking down of old Z sec windows with projected hinges and refixing in same position with box type hinges of 100 mm long incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n exc 1.5mtr in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes n exc 10 Sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and exe 1.5 m but not n exc 3.0 mtr in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes n exc 10 Sqm on plan and exe 1.5 m but not n exc 3.0 mtr in depth and getting out any type of soil complete all as specified and directed.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. .complete all as sepecified dirceted by engr-in-charge.

Returning,levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil as in floors with earth obtained from excavation complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and brushing surface with neat cement slurry with 3.0kg of cement per sq. metre ,removing serviceable tiles to store and rubbish off the cantt area complete all as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified.

Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing pressed steel frames( factory made) made of cold rolled mild steel sheets of 1.25mm thickness as indicated in IS for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

Supply and fixing pressed steel frames( factory made) made of cold rolled mild steel sheets of 1.25mm thickness as indicated in IS for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

Supply and fixing Factory made, plain framed, panelled shutter (one panel) 35mm thick, 2nd class hardwood with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing 30 mm thick glazed and skeleton shutters 2nd class hardwood as in windows, ventilators etc, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or roundedfitted with cut and mitred beads for scuring glass, etc size of members of shutters as specified in SSR-I, section 8, clause 8.24 (a) fixed to chowkhats complete all as directed.

Supply and fixing in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri Plastiwood

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement Supply and fixing in frame at site as per specification. Make:- RajShri Plastiwood.

Prelaminated MDF board 19 mm thick as in shutters / shelves , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping ( 15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engineer-In-Charge

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung including pintle hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.

Repair to steel window,venilators (including slot pin, hinge,hook and eye of standard quality where required), resecuring of windows wire gauge and railing/grills by using welding equipments complete all as directed.

Supply and fixing butt hinges of extruded aluminium alloy with galvaised mild steel hinge pin, anodised and fixed type B-21 of size 100mm complete all as specified.

Supply and fixing Extruded aluminium handles, (ISI Marked) size 125mm ,cast type,anodised complete all as specified.(ISI Marked)

Supply and fixing Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

Supply and fixing Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of size 250mm long.(ISI marked)

Supply and fixing in repair mild steel sliding door bolt 300mm long, plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate all as specified. (ISI Marked)

Supply and fixing mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified. (ISI Marked)

Supply and fixing in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified. (ISI Marked)

Repairs to welding n.exe 2.5 cm in lenth by using welding machine where necessary thicknesss of each welding spot exceeding 6mm but not exceeding 9mm complete, all as directed at site incl all Material and Labour

Supply and fixing Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

Material & labour 4mm thick sheet glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane complete all as specified.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 500 liters capacity, (cylindrical vertical with closed top) triple layered,white,hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, including making connections complete all as specified.

Hoistng and fixing in position only Rotational moulded polyethylene water storage tanks of 500 liters capacity, (cylindrical vertical with closed top) all as specified in SSR Part-I except water tank, including making connections complete all as specified

Supply and fixing GI tubes medium grade bore of pipe 15mm fixed to wall or laid in floors etc complete with all fittings Make: Prakash Surya,TATA,Jindal

Supply and fixing GI tubes medium grade bore of pipe 20mm fixed to wall or laid in floors etc complete with all fittings Make: Prakash Surya,TATA,Jindal

Supply and fixing GI tubes medium grade bore of pipe 20 mm fixed to wall or laid in floors etc complete with all fittings Make: Prakash Surya,TATA,Jindal

Refixing old steel tubing galvanised, 15 mm bore, with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and as directed by Engineer-In-Charge.

Refixing old steel tubing galvanised, 20 mm bore, with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and as directed by Engineer-In-Charge.

Material and labour for 100mm thick PCC 1:3:6 type B-2 using 40mm graded crushed aggregate as in sub base of floors/pathway/hardstanding finished even and fair to receive top finish complete all as specified and directed by Engr-in-Charge.

Material and labour for repairing of concrete surfaces such as chajjas,upward facia,downward facias,ceiling and similar items with plain cement concret 1:2:4 type B-0 or rendering 10mm thick in CM 1:3 includind dubbing coat without using extra cement finished even and fair including necessory formwork and scaffolding complete all as specified and directed.(Up to fourth storey bldg)

Material and labour for reinforced cement concrete louvers and jallies, 40mm thick ( measured solid ), type B-0 1:2:4 ( 12.5 mm graded aggregate ) including all mouldings excluding frame set in CM 1:4 all as specified and as directed

Material and labour RCC type B1, 1:2:4 using 20 mm graded aggregate as in Slab supported with wall, beam, column in floor, roof, landing etc.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc.), chullah hoods, chajjas, shelves and similar articles including use of form work and placing in position at site complete all as specified .

Material and labour for PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base , 75mm thick completed all as specified ad directed

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed

Material and labour Plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate 40 mm thick as in roof padding, mass concrete and similar work complete all as directed by Engr-in-charge.

Material and labour for cement concrete 1:2:4 type B-2 using 12.5 mm graded stone aggregate in roof pading mass concrete, copping of parapets and similar work complete all as directed by Engr-in-Charge.

Material and labour for hardcore of broken stone of gauge exc 63mm and not exc 100mm deposited spread and levelled in layers n.exc 15cm thick watered and well rammed to a true surface.

Material and labour Plain cement concrete 1:3:6 type C 2 using 40mm graded aggregate 100 mm thick as in floor finished even and fair complete all as directed by Engr-in-charge.

Plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate), as in sunken floors ( upto 4th floor) mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for concrete bed in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) to drain pipe 150mm bore including packing under & haunching against the sides after they are laid and tested complete all as specfied.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified.

Material and labour for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs, manhole covers etc including necessary form work and set in cement mortar (1:4), complete all as specified.

Material and labour for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm Graded Aggregate)as in foundations, filling and mass concrete.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc.), chullah hoods, chajjas, shelves and similar articles including use of form work and placing in position at site complete all as specified .

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement.

Rendering 15 mm thick, on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-In-Charge.

Material and labour for rendering 10mm thick in CM (1:3) including mixed with WPC as in sunken floor wall, chajja, column, beam ,& parapet wall finished even & smooth w/o using extra cement, all as specified and directed.

Material and labour for rendering 15 mm thick in CM (1:4) including mixed with WPC on brickwork or concrete surface finished surface even & smooth with using extra cement, all as specified and directed.

Supply only Water proofing compound liquid.

Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.

Material and labour formwork to soffit of suspended slab such as roof slab, floor slab etc.

TMT bars 10 mm dia and above as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with & including MS wire (annealed not less than 0.9mm dia) all as specified and directed.

TMT bars 06 mm to 08mm dia and above as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with & including MS wire (annealed not less than 0.9mm dia) all as specified and directed.

Supply and fixing joist, channel,Angle ,tee & FI section fixed indipendetly without conecting plates etc confirming to Gde Fe 410-W (Gde-E-quality-A) all as spd and directed at site

Supply and fixing structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Material & labour for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as directed by the Engineer-in-Charge.

Material and labour for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Material and labour for applying one coat of synthetic enamel paint on old wooden surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Preparation of newly plastered surfaces and applying three coats of white wash on ceilings

Preparation of old plastered surfaces and applying two coats of white wash on ceilings

Preparation of old plastered surfaces and applying two coats of white wash on wall

Material and labour for preparation of old decorated plastered/concrete/brick surfaces of walls and applying two coat of cement based paint complete all asdirected.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper on old surface of walls over a coat of chalk whitening on plastered surfaces, preparatory to distempering complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper on new surface of walls over a coat of chalk whitening on plastered surfaces, preparatory to distempering complete all as specified and as directed.

M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th storey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new surface over 10cm width or girth complete all as directed by Engr-in-Charge

Material and labour for two coats of synthetic enamel paint on old steel surfaces including preparation of new surface over 10cm width or girth complete all as directed by Engr-in-Charge

Material and labour for Sealing of WC/Floor traps joint and joints between rain water pipe and roof by using neat white cement paste or leak proof material and making the joint leakproof in case seepage is observed from WC/Floor trap and joint of rain water pipe and roof slab. Note : Work to be carried out up to 4th storey bldg in any condition of working lace/area.

S&F UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Material and labour for salt glazed stone ware (SGSW) grade 'A' drain pipe of 300mm internal dia, laid in trenches on concrete bed and jointed complete all as specified and directed by Engr-in-Charge.(excavation and earth work and concrete bed shall be measured and paid for separately)

Material and labour for salt glazed stone ware (SGSW) grade 'A' drain pipe of 150 mm internal dia, laid in trenches on concrete bed and jointed complete all as specified and directed by Engr-in-Charge.(excavation and earth work and concrete bed shall be measured and paid for separately)

Supply and fixing UPVC type B pipes 110 mm bore as rain water pipe single socketed in any length with rubber ring joints fixed complete to walls and ceilings or laid in floors,weight of pipe not less than 0.70 kg /mtr (ISI Marked) complete all as specified and as directed by Engineer-In-Charge. NOTE: Work to be carried out up to 4th storey bldgs in any condition of working location/area.

Supply and fixing UPVC type B pipes 80 mm bore as rain water pipe single socketed in any length with rubber ring joints fixed complete to walls and ceilings or laid in floors,weight of pipe not less than 0.70 kg /mtr (ISI Marked) complete all as specified and as directed by Engineer-In-Charge. NOTE: Work to be carried out up to 4th storey bldgs in any condition of working location/area.

Supply and fixing UPVC type B pipes 40 mm bore as rain water pipe single socketed in any length with rubber ring joints fixed complete to walls and ceilings or laid in floors,weight of pipe not less than 0.70 kg /mtr (ISI Marked) complete all as specified and as directed by Engineer-In-Charge. NOTE: Work to be carried out up to 4th storey bldgs in any condition of working location/area.

Supply and fixing in repair PVC (SWR) bends for 110 mm bore (ISI marked) with access door any radius complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing UPVC type B branch piece single 'Y' equal or unequal for 110mm bore (ISI Marked)

Supply and fixing UPVC type B branch piece single 'Y' equal or unequal for 80mm bore (ISI Marked)

Supply and fixing in repair UPVC (SWR) bends any radius 110mm bore Make :- Supreme, finolex

Supply and fixing in repair UPVC (SWR) bends any radius 80 mm bore Make :- Supreme, finolex

Supply and fixing in repair UPVC (SWR) vent cowl( Grade " B " ) 110 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Supreme, finolex

Supply and fixing PVC (SWR) pipes 80 mm bore, single socketed in any length with rubber ring joints fixed to walls ( including Clips) complete all as specified.

Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe ( up to 4th floor) cpmplete all as spesified.

Supply and fixing in repair Cast Iron ( Sand Cast) 100 mm bore 'P' or 'S' traps.

Material and labour for rendering 15mm thick in cement mortar 1:4 on RCC roof slab finishing even and smooth incl mixing of IWPC complete all as specified and directed.(IWPC shall be measured and paid separately)

Supply and fixing floor trap, 100 mm dia with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 PCC 1:2:4 complete all as directed.

Material and labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified.

Supply and fixing in repairs of stainless steel tray (03 trays in each sets) complete all as specified and directed.

S&F in repair soap dish holder complete all as specified.

Supply and fixing in repair chromium plated, single towel rail 600mm long complete all as specified.

Supply and fixing Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified. ( ISI Marked)

Supply and fixing in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified. ( ISI Marked)

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm bore pipe, including making connections complete all as specified. and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm bore pipe, including making connections complete all as specified. and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s

Supply and fixing PVC connection 15x450mm long with PTMT nuts & bolts.

Supply and fixing in repair Bib taps with wall flange,cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe,Supply and fixed in repairs, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Prayag, CERA,Nirali, Jayna

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), and PVC connection 15 mm dia 450 mm long complete all as specified and as directed by Engineer-In-Charge..Make : Cera,Essco,Hindware ( sample as approved & kept in GE's sample room)

Supply and fixing in repair vitreous china squatting ‘Pan’ Orissa pattern 580mm x 440mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including trap set in and including concrete and making good to floor complete all as specified Make: Prayag Cat No 4642, CERA, Somany,Jaquar,Hindware

PVC flushing cistern of capacity 10.0 litres fixing in repair, complete all as specified and as directed by Engineer-In-Charge. ( sample as approved & kept in GE's sample room)

Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), and PVC connection 15 mm dia 450 mm long complete all as specified and as directed by Engineer-In-Charge..Make : Cera,Essco,Hindware ( sample as approved & kept in GE's sample room)

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe,Supply and fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing 25mm dia powder coated MS pipe thickness of pipe 1.25mm (minimum) exterior garde best quality drapery rod with curtain rings fancy type 10 Nos per RM as approved by the GE fixed in position with curtain rod brackets and end pieces (sample as approved and kept in GE's sample room) complete all as directed.

Supply and fixing toughened glass shelf 50cm long 60mm wide with railing fency type as in repairs all specified and directed by Engr-in-charge. Make: Prayag Cat No BEA-47, CERA,Somany, Jaquar,Hindware

Supply and fixing in repair chromium plated Shower rose 125 mm dia overhead with 225 mm with flange size including fixing to steel pipe, complete all as specified.

Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and putting APP roof treatment trafelt sheet in it and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Material and labour Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off Rendering 15mm thck in CM 1:4 mixed with integral WPA on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPA shall be measured separately) and then Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3 Kg/Sqm over a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufactured of density at 25 degree C’ 0.87-0.89Kg/Liter and viscosity 70-160 CPS, applying a coat of bitumen 85/25 grade @ 1.2 Kg/Sqm of surface and then laying APP membrane using butane torch with 10cm over laps which shall be thermo fused by flame and over the APP membrane and then Applying a coat of bitumen 85/25 @ 1.2 Kg/Sqm over the APP membrane all as specified. MAKE-IWL/Pidilite

Material and labour for non skid ceramic coloured/pointed tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match and including 15mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.

Material and labour for non skid ceramic coloured/pointed tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skiriting and set and jointed in neat cement slurry and pointed in coloured cement to match and including 15mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.

Material and labour Non - skid Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed in C:M 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)

Supply and fixing mild steel angle iron as in frame work for stand for hosting PVC water tank with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting complete of gde Fe 410-0 or Fe 310-0 complete all as specified .

Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified .

Supply and fixing in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified .

Cleaning of water storage tanks of 500 ltr capacity by removing all scale,waste and dirt, etc, from tanks and from mouths of circulating pipes, etc and disinfection completely by making all arrangement and writing date of cleaning on side of tank and obtaining completion from user complete all as specified.

Septic tank for 50 users, twin chamber, (Brick construction) with top of slab in RCC 1:2:4 , including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CEPZ/C-TD/013/13 Sheet 1/5 to 5/5.

Septic tank for 10 users, twin chamber, (Brick construction) with top of slab in RCC 1:2:4 , including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CEPZ/C-TD/013/13 Sheet 1/5 to 5/5.

Soakage well, 1.80m dia and 3.00 m depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundation, brick work in CM 1:4, RCC 1:2:4 Cover slab, manhole cover with angle iron frame, appropriate and suitable size brick bat filling, SWG junction 150mm bore CI vent pipe and Cowl etc. complete all as specified and as shown on drawings. (Soak well shall be constructed as per CE Pathankot Zone TD No CEPZ/C-TD/013/13 Sheet 1 to 5).

E/M- Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs to the existing surface & finish complete all as specified and as directed.

Taking down of UNSV MCB DB along with MCB's complete all as directed.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised suitable size flush boxes incl white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per srl item No 148 but one 3 pin socket outlet 6 amp independent board.

Description all as per srl item No 148 but one 3 pin socket outlet 6 amp on same board.

Description all as per srl item No 148 but one 3 pin socket outlet 16 amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 Sqmm as in continuous earth wire complete all as directed.

Material and labour for modular type switch one way 6 amps, 1 module complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6 amps combined 2 module complete all as specified and directed.

Material and labour for modular type switch, one way 16 Amps 1 module complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6/16 amps combined 2 module complete all as specified and directed.

Supply and fixing Bell Push with indicator Polycarbonate material ISI marked 1 Module , 6 Amps, 240 V Make: Cat Ref 800110 Elvira Indoasian or equivalent in Havells,Anchor (Roma)

Supply and fixing musical door bell, AC 230 volt single phase.

Supply and fix Fan regulator step type (electronic ) 2 Module for 1200/1400mm sweep AC ceiling fan.Make: Cat Ref 800142 Elvira Indoasian or equivalent in Havells, Anchor (Roma)

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Batten type complete in all respect .Cat Part No LHFYBYPNIA1W022 in Havells or Cat part No DMLN1LT8-16 in Crompton or Cat part No WIO921208 of Wipro, HILB04-118LED of Halonix alongwith LED tubeRod with superior aesthetic and heat dissipation capability suitable for G-13 base tubelights base fluorescent T8/T12 luminaire , 18-20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Model LHLDCLXNUJ7Z018 of Havells or Cat part No LTT 8-20 of Crompton or LL13-181-650 of Wipro, HLTLD-NI03-18CW-PC of Halonix. Note : The LED batten and LED tube rod shall be of same make.

Supply and fixing only lamp holder, PVC /Polycarbonate type with back plate for batten fitting.

Supply and fixing LED lamp 7watt B-22 holder base with polycarbonate body and aluminium heat sink warm white cat part No LTHPLEDLAMP7W/B22 in C&S or equivalent in Havell's/Philips.

Supply and fixing Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing. Makes: IndoAsian Optipro Cat Part No 811807 or or equivalent in Havells/ Legrand

Supply and fixing MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand

Material and labour for sub main wiring with single core copper conductor cable FRLS-PVC insulated and unsheathed of size 2x6 Sqmm and one No 1x6sqmm as in continuous earth wire drawn into and including PVC concealed conduit 20mm dia medium grade 1.5mm wall thickness ISI marked with all conduit fitting and fixing accessories including chesing, cutting and making good to match with existing surface complete all as specified and as directed by Engineer-in-Charge (Note:- Two single core PVC insulated 8 Sqmm cable and one single core PVC insulated 4sqmm cable with PVC conduit 20mm dia shall be measured as one length)

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of the hole of required size for fixing of the exhaust fan along with plastering, finishing and making good complete all as specified and directed. Make : Bajaj/Havells.

Supply and fixing energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro

Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps rating complete all as specified and directed. Make: IndoAsian/Havells/C&S Electric/HPL.

M/S PARAMJEET SINGH

M/S ANIL MAHAJAN

M/S OM GUPTA

M/S shakti steel industries

M/S Shesh Paul Gupta