Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹1.1 L
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Arvalli R & B Panchayat Division, Modasa
Construction Of Bhudasan Bhataji Temple to Rumalji House Joining Road Under MMGSY (OWR NORMAL) 2025-26 Ta-Bayad Dist.-Aravalli.
366020
08/2026-27
Open
Civil Works - Roads
Works
Arvalli
₹3,600
Executive Engineer, Panchayat R And B Division, Modasa
₹1.1 L
16 Nov 2026
16 Nov 2026
16 Nov 2026
4 Dec 2026
16 Nov 2026
90 days
Clearing and grubbing road land including uprooting trunk, vegetation, grass bushes,
shrubs, sapling and trees girth upto 300 mm removal of stumps of trees cut earlier and
1 disposal of unservicable materials [C] By Mechanical means in area of light jungle 0.75 28455.11 Hact.
Earthwork for embankment including breaking clods, dressing with all lead and lift and
including watering rolling and consolidation of subgrade in layers at O.M.C. to required dry
2 density including filling the depression which occur during the process using power roller 6864.00 154.88 Cmt
8T to 10T.(E) From Borrow area within 3.0KM. lead
Rolling of earthwork in layers with vibratory roller 80 Kn to 100 Kn static weight including
3 filling in depressions which occurs during the process. 6864.00 22.88 Cmt
Construction of Grannular sub base of in providing GSB Gr - I coarse graded material using
B.T Metal 26.5mm to 53 mm @ 35 % ,26.5mm to 4.75mm 45o/o & Below 2.36mm 45 %
4 Below 2.36 mm 20% in uniform layer with motor grader on prepared surface mxing by mix 1084.00 1030.61 Cmt
in place method with vibratory roller to achive the desired density complete as per close
401. Grading I
Providing, laying spreading and compacting stone aggregates of specific sizes to water
bound macadam (Grade-I) (BT Metal of size 45-90 mm) Specification including spreading
in uniform thickness , hand packing, roalling with 3 wheeled steel / vibratory roller in stages
5 to proper grade and camber , applying and brooming requisite type of screening / binding 678.00 1275.33 Cmt
material to fill up the interstices of coarse aggregate ,watering and compacting to the
required density.
Providing, laying spreading and compacting stone aggregates of specific sizes to water
bound macadam (Grade-II) (BT Metal of size 45-63 mm) Specification including spreading
in uniform thickness , hand packing, roalling with 3 wheeled steel / vibratory roller in stages
to proper grade and camber , applying and brooming requisite type of screening / binding
material to fill up the interstices of coarse aggregate ,watering and compacting to the
required density.
Providing and compacted Quarry spall for hard side shoulder on road site including
7 collection of material spreading, rolling of waterlng etc. complete as directed. 180.00 536.04 Cmt
Providing & applying evenly Tack coat with bitumen Grade (VG-30) on prepared surface of
8 granular base including cleaning of road surface and sparying primer at the rate of 4.0 Kg. / 6325.00 24.76 Smt
10 Smt using mechanical means.
Providing & laying 37.50 mm thick B.U.S.G. with B.T. aggregates as per M.O.R.T.&H.
specification & bitumen for mixing viscosity grade VG-30 at the rate of 19.90 Kg./M.T.
i.e.1.99 % of total weight of mix including heating the aggregare & asphalt in continuous
9 Drum mix plant and spreading the same by paver finisher and consolidation with vibratory 475.00 2156.15 M.T.
roller including paving all materials equipments, tools & plants, fire wood, oil, kerosene,
labour charges etc complete using contractorrs own machinery batch mix plant & paver
finisher etc. complete.
Providing and laying 37.5 mm thick compacted bitumenous macadam (BM) using crushed
stone aggregate as pcr MORT & H grodation a & VG-30 grade bitumen [with VG-30 as
tack coat 2.5 kg/10 smt] at the rate of 3.40 % by weight of total mix (i.e. 34kg/mt by wt. of
total mix) for binding including heating and mixing the asphalt and aggregates by
continuous drum mix plant and transporting the mix and spreading the same by paver
linisher and consolidation with vibratory road roller including using all necessary
equipments, tools, plants, including cost of all materials, firewood, oil, lubricants, labour
charges etc. complete.
Providing & laying 20mm thick premix seal surfacing using specified graded machine
crushed aggregates with VG-30 grade bitumen at the rate of 5.10 % i.e. 51.0 Kg/ M.T. by
weight mix including heating & mixing in drum mix plant transporting the mix spreading
11 the same by paver finisher and consolidation by vibratory roller as per MORT&H 127.00 3689.94 M.T.
specification including cost of all materials fuel, labours, tools and plant etc. comp.
Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary
reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc.
complete (For O.D. road V.R.)
Providing and fixing hectometer as per I.R.C. type design including painting, lettering etc.
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm aluminium
sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-1977. Pre treated
with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron
14 angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy 12.00 3379.55 No
coatings in black andwhite bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision
of engineer in charge.(A) Engineer Grade(VR)
Village name/ Bump Ahed sign :-Providing and fixing sing boards made out of 2mm
aluminium sheet; size 90 x 60cms. rectangle as as per the design of IRC-67-1977 pre
treated with phospheting process & acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2
nos) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm
15 painted with best quality epoxy coatings in black and white bends. the details of symbol or 4.00 5045.37 No
inscription / numerals for each board shall be as per the instruction of engineer in charge.
The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of engineer in charge.(A) Engineer
Grade(VR)...
Place ideatification sign :-Providing and fixing sing boards made out of 2mm aluminium
sheet; size 150 x 90cms. rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand
post and frame fabricated from suitable size iron angle of 50x50x5mm 75x75x6mm as
required; painted with best quality epoxy coatings in black and white bends. the details of
symbol or inscription / numerals for each board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.
including excavation curing etc. complete under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
MMGSY "LOGO" Board : Providing and fixing of MMGSY LOGO informatory sign board
with Logo as per section 1700 of MORD specifications and drawing. The board will be a
composite unit consisting of Two Plates of ACM (Aluminum Composite Material), material
specifications as per clause 17001.3. The top most plate will be of 3mm ACP in diamond
shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on
back on edges. The Lower plate will be of 4mm ACP of 1100x300mm size riveted with MS
angle iron frame of 25mmx25mmx5mm size on back on edges. Riveting of atl the sheets
over angle and flat iron frame will be done neatly to have plain surface on one side. The
angle iron frame of Both the plates will be welded to a 75mmx75mmx6mm Mild steel post
at Centre and this post will be embeded in cement concrete Ml5 grade block of
450x450x600mm below ground level. The height of the bottom of the lower plate will be No
1200mm from normal ground level. The spacing between the diamond shaped plate and
Lower Plate is kept 150mm. MMGSY logo, letters and numerals on the ACM should be
made up of Retro Reflective sheeting of Type-l AEGP Class-A grade as per the latest
MORD section 1700 and IRC 67 2012 specifications. Al the section of the frame and posts
shall be painted with primer and two coats of epoxy paint. The design, painting and
lettering shall be done as per the MMGSY Logo sign Design and as directed by Engineer in-
charge. A warranty for 5 years for the Retro reflective sheeting for Type-l Class-A fi'urn
oligiual nranufacturer shall be submitted by contractor.
STOP SIGN:-Providing and fixing sing boards made out of 2mm aluminium sheet; size
x 90cms. rectangle as per the design of IRC-67-1977 pre treated with phospheting process
& acid teching; coated with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m
long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm
75x75x6mm as required; painted with best quality epoxy coatings in black and white bends.
18 the details of symbol for each board shall be as per the instruction of engineer in charge. 2.00 4676.06 No
The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing tec. complete under the supervision of engineer in charge.(A) Engineer
Grade(VR)....
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 30cms. rectangle as as per the design/drawing attached (IRC) pretreated with
phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
19 Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 4.00 2423.74 No
35 x 35 x 3mm & 50 x 50 x 5mm painted with best quality epoxy coatings The fixing at
site shall be in 1:2:4 CC block of size 45x45x60cms. for each leg. including excavation
curing etc. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...
Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet /
3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with High Intensity
Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame fabricated from suitable size iron angle
20 of35x35x3mm; painted with bestquality epoxy coatings in black and white bends. the 6.00 3711.75 No
details of symbol or inscription / numerals for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60Cms. for
each leg including excavation, curing etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer
& a certified copy of 3 year outdoor exposure test report from third party test lab for the
product offered shall be submitted by contractor. (A) Class-B Type-4 Retro Reflective
MMGSY Project Information Board: Providing and fixing of typical MMGSY Project informatory
sign board with Logo as per 1700 of MORD specifications and drawing. The board will be a
composite unit consisting of Three Plates ACM (Aluminum Composite Material), material
specificaitons as per clause 17001.3. The top most plate will be of 3mm ACM in diamond shape of
600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges.
The middle 4mm ACM plate of will be 1200x150mm size riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges. The main 4mm ACM lower most plate will be
1500mmx600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting of
all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side.
The angle iron frame of lower most plate and flat iron frame of the middle plate will be welded to
two nos. 75mm x75mm (12 SWG) sheet tubes posts placed at 1125mm apart centre to centre. the
top of the middle plate wilt be flushed with the top of 75mm dia medium steel tube posts and these
posts will be embeded in cement concrete M15 grade block of 450x450x600mm below ground
level. The height of the bottom of the lower plate will be 1200mm from normal ground level and
21 the bottom of the middle plate will be 100mm above the top level of the lower most plate. the 1.00 9909.11 No
diamond shaped plate mounted over flat angle iron frame will be connected to middle plate by
square steel section of 47mmx 47mm, thickness 12SWG having a spacing of 100mm between the
diamond shaped plate and middle plate and this square section will be riveted to the bottom point
of the diamond shaped plate. MMGSY logo, letters and numerals on the ACM should be made up
of Retro Reflective sheeting of Type-l AEGP Class-A grade as per the latest MORD section
and fRC 67- 2012 specifications. Al the section of the frame and posts shall be painted with primer
and two coats of epoxy paint. The design, painting and lettering shall be done as per the MMGSY
Signage Guide and as directed by Engineer-In-charge. . A warranty for 5 years for the Retro
reflective sheeting for Class-A respectively, from original manufacturer shall be submitted by
contractor
Citizen's information Board- Providing and fixing of typical MMGSY information board as
per instruction. Two ACP sheets of 3 mm thick, of 900 mm x 750mm size fixed at top &
bottom duly rivetted with MS angles of 25 x 25 x 5 mm thick M.S angle shall be welded by
two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes posts
duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 75mm, below
22 ground level. The letters & figure of any shade reflectorised with High Intensity Prismatic 1.00 11226.15 No
Grade Retro Reflective Sheeting of Type-4 as per ASTM D- 4956 and latest MORD
specifications; All sections of framed posts and steel tube will be painted with primer and
two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). (A)
Class-B High intensity Grade Retro Reflective sheeting.
Road Marking With Hot Applied Thermoplastic Paints with Reflectorising Glass Beads On
Bitumen Surface.Providingcand laying a hot applied thermoplastic compound 2.5 mm. thick
including reflectorising glass beads @250 gms per sqm. Area,Thickness of 2.5 mm is
exclusive of surface applied glass beads as per IRC:35-2015.The finished surface to be level
uniform and free from streaks and holes. Zebra patta/bump patta lane /center line /edge
line/cut patta, The white color marking should provide Iiminanance coefficient on cement
road shall be min. 130 mcd/m2/lux and asphalt road shall be min. 100 mcd/m2/lux during
the service life during the day time. The marking should meet the performance criteria for
night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of
IRC 35-2015. Warranty of Reflectorising for Two Years.
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate
and ABS moulded body and reflective panels with Micro prismatic lens (No Glass bead
lens) capable of providing total internal reflection of the light entering the lens face and
shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and
complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97
24 Ð DO III Dt 11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm 600.00 217.41 No
and 130 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the
base shall be 35 +/- 5 degree. The body of the marker should having finger grip for easy
and accurate placement and application with epoxy / bituminous Adhesive as recommended
by the manufacturer of the marker. The color of the marker should be as per the IRC
2015 and as directed by Engineer-in-charge.
Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes
in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal
daimeters.(v) 300mm dia.
Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes
in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal
daimeters.(v) 600mm dia.
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful
materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
Providing and filling in foundation with ordinary Cement concrete M-100 mix and
providing necessary vertical pin headers including formwork, vibrating, ramming and
curing complete.
Providing and casting in situ Ordinary cement concrete M150 for R.C.C. Raft and cut-off
walls including necessary shuttering laying, vibrating, ramming and curing complete.
Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes
in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal
daimeters.(v) 900mm dia.
Providing and placing in position for T.M.T.(FE 500D bar reinforcement (l.S.l. Mark) for
31 following items including cutting, bending, hooking and lying complete as per detailed 2.86 73858.70 M.T.
Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 100mm
including laying in proper grede and jointing the completed as per detailed specification.
Total Tender amount
Rupees One Crore Five Lakh(s) Sixty Thousands Seven Hundred Eighty Nine And Paise Seventy Three Only
I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates
mentioned above. Amount of my/our tender works out as under.
* Estimated amount put to tender
Deduct :_____ % Below Rs.________________
Net Rs. ______________________
In words ___________________________
1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra
Payment shall be made.
2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.
3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.
4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c,
Date: 11/05/2017 as stated i. S.O.R therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement
consumption have been deduvted from the rate of orignal item at the rate of input rate mentioned in all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Bandhkam (Pan) Sub Division R & B (Pan) Division
Bayad Modasa
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
002.specification pkg-Constg. Bhudas.pdf
009.POL-Pkg-Constg. Bhudasan Bhathaj.pdf
001.SBD Book-Pkg-Constg. Bhudasan Bh.pdf
008.BOQ-pkg-Constg. Bhudasan Bhathaj.pdf
010.Test Schedule Pkg-Constg. Bhudas.pdf
007. ESMP Table and Protection Clause.pdf
006. Clauses-Terms And Conditions of Contract-B1-04.09.2017 (1).pdf
004. SOM and Monitoring Formats (Uploading attachment).pdf
005.Letter Special Condition Contract.pdf
003.SBD GR All Pdf-1-58.pdf
003.SBD GR All Pdf-59-111.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .