REPAIR, MAINTENANCE AND PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE ITEMS AT AF STN SAMANA UNDER GE (AF) No 1 JAMNAGAR.

Amount

Removing the following old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ” and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032)

MS lock 6 levers best quality with brass levers & duplicate key (Make:- Harrison/Samrat/Lico)

Mild steel chromium plated handle 125 mm size. Make : link/Lico/MK/Man

Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing.

Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

Removing the existing Unserviceable plywood from Bed Hard Steel & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R)

Removing the following old and unserviceable parts / components of “CHAIR DINING with cushioned ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD/MAP-II/04

Front leg made out of teakwood.

Rear leg made out of teakwood.

Bottom stiffener long first class hard wood (teak wood).

Bottom stiffener short first class hard wood (teak wood).

Short rail and made of first class hard wood (teak wood).

long rail made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry as directed by Engineer-in-charge.

Removing the following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

Removing the following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

long / short rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Removing the following old and unserviceable parts / components of “Chair dining with long back ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 357)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of first class hard wood (teak wood).

Bottom stiffener short made of first class hard wood (teak wood).

Short rail of seat made of first class hard wood (teak wood).

Long rail of seat made of first class hard wood (teak wood).

Complete seat made out of 50 mm thick 32 density foam with 12 mm thick plywood base, upholstered with rexin.

Complete back made out of 50 mm thick 32 density foam with 12 mm thick plywood base, upholstered with rexin.

Removing the following old and unserviceable parts / components of “Chair School with Hand Board” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05)

S & F in repair PVC Seat & back one piece of chair school with hand board. (Drg No.FD/E6/MAP/05) Make:- Blowplast / Supreme / Cello / National, Amko)

Removing old unserviceable tops from Chair school with hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing unserviceable Hard rubber shoe and S & F new same size.

Removing following old and unserviceable parts / components of “CHAIR WOODEN BOTTOM” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 & 225)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Wooden bottom made out of 6 mm plywood.

Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood top by removing nylon Newar and S&F of 12mm thick ply, ISI mark, BWR Grade as per IS 303 of size 1980mm X 900mm by fixing with 12Nos nut and bolt of suitable size with GI washer along with provision of 25mm x 3mm Flat iron stiffner 02 Nos at the ends to welded with the top of long rail as directed by GE.The MS pipes shall be painted with two coats of synthetic enamel black paint over a coat of red.Make:Kitply/Greenply/Centuryply/Archidply (FD-220)

Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in drg & directed by Engr-in-charge. Make: Jindal/Tata

Removing of old damaged/broken short rail from charpoy and making of short rail from u/s long rail retreived from ser No.9.01 above incl threading & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing of old damaged/broken short rail from charpoy and making leg from u/s short rail retreived from ser No.9.02 above incl threading, S&F 3mm thick MS plate in bottom to be welded with legs & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old broken/damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old and unserviceable parts/components of Charpoy Folding and S&F in replacement plywood BWR grade ISI marked 8mm thick to the top of the charpoy with suitable 12Nos nuts,bolts & washers including tightening the loose components complete all as specified in drawing and directed by Engr-in-charge. FD-388(R)

M&L for preparation of old painted steel surfaces of charpoy folding by scrapping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drawing and directed by Engr-in-charge.

Removing old and unserviceable parts / components of “chair tubular office steel with / without arms” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 (M)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

M&L for re-canning of chair verandah using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256)

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel (Drg No FD - 256, FD / E6 / MAP / 11)

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge. (Drg No. FD-228, FD-229, FD-270, FD-271, FD-279, FD-280 & FD-201)

M&L for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover tapesty cloth approved by Engg-in-Charge. (Drg No FD-281)

Removing following old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277)

Removing old unserviceable tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371)

Back made out of 4 mm thick plywood.

Removing old unserviceable tops from Side board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Door made all as per item 16.02

Drawer made all as per item No 16.02

100 mm size Aluminium hasp & staple.

Knob 40mm dia

Removing following old and unserviceable parts / components of “Table centre” and S & F new parts / components of same size, existing pattern , same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-235 & 274)

Removing old unserviceable tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Table Computer” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Removing old unserviceable tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made all as per items ser No 18.02

Pull out tray for Key Board made all as per items ser No 18.02.

Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-239 & 273)

Removing old unserviceable tops from Table dining 6 person and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Top for TABLE DINING 8 PERSON made all as per items ser No 19.01

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Table Printing and Fax ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/ E6/ MAP/06)

Removing old unserviceable tops from Table Printing & Fax and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing the existing unserviceable Drawer and supply and fixing new Drawer of same size and shape as per drawing and providing 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Removing the existing unserviceable leg and S & F new legs 25 mm thick square MS pipe of same size and shape

M&L for spot Welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing.

Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 276 )

Back of 6 mm thick commercial face plywood.

side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) all as specified in drg as directed by Engr-in-charge.

Top / middle shelf all as per items ser No 21.02

Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood for mirror

Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Removing old unserviceable tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004)

Removing old unserviceable tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing of unserviceable/broken/Damaged/Rusted drawers from existing table office clk steel and S&F new drawers made out 1mm thick MS sheet all as specified in drg & directed by Eng-in-charge.

M&L for removal of existing unserviceable lock of any description in any position, S& F new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge.

Preparation of existing old decorated surfaces of the table office clerk steel after repairs &removing the dents, filling with putty and spray painting one coat of synthetic enamel paint with first grade quality of paint external/internal as shown on drawing as specified and directed by the Engineer-in-charge.

Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003)

All as per item No 24.01 above but Table Office Offr steel

All as per item No 24.02 above but Table Office Offr steel

All as per item No 24.03 above but Table Office Offr steel

All as per item No 24.04 above but Table Office Offr steel

All as per item No 24.05 above but Table Office Offr steel

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail various type of wooden table(Table dining, table writing, Table 3x2, Bed plywood top) fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charge.

Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Godrej/Durian )

Removing the existing old foam & tapestry of seat and S &F new 40 density foam cushion 75 mm with tapestry as approved By GE .

All as per item No 27.01 above but Back

All as per item No 27.01 above but Arm

Removing the existing old unserviceable castor wheel and S&F new caster wheel.

Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc.

Replacement of complete plate base stand assembly including all necessary fitting etc.

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Removing of old unserviceable top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & bas directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

Removing following old and unserviceable parts / components of “TABLE DINING ORs” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-165 (M))

Removing of old unserviceable top of table dining ORs and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & bas directed by Engr-in-charge.

M&L for one coat of synthetic enamel paint black to table dining OR after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engr-in-charge.

Removing the existing unserviceable legs of table dining ORs and S&F new legs made out of 25mm MS square tube 1.6mm thick as per size and shape as specified in drg and as directed by Engr-in-charge.

Replacement of rubber shoe with &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :-

Bin soiled linen (Drg No-FD-15 , 244)

Bed plywood (Drg No- FD 246)

Board Notice (Drg No-FD 117M, 99)

Chair dining (Drg No-FD 279)

chair dining long back (Drg No - FD-357)

Chair easy (Drg No-FD-229)

Chair writing (Drg No-FD 250,280)

Hat stand with mirror (Drg No-FD-362)

Peg table (Drg No-FD 25M,277)

Stool dressing (Drg No-FD 252)

Side Board (Drg No-FD 26,241)

Sofa set 5 seater (Drg No-FD-234/281)

Sofa set 4 seater (Drg No - FD-234/281)

Table dining for 6 persons (Drg No - FD-239,273)

Table dining for 8 persons (Drg No - F-239,273)

Table writing (Drg No - FD -275)

Table centre (Drg No - FD-274,229,235)

Table dressing gents with mirror (Drg No - FD-230)

Table dressing ladies with mirror (Drg No - FD 32,378,251)

Teapoy (Drg No - FD-232,278)

Table bed side (Drg No - FD-276)

Table 900 x 600 x 760 with drawer (Drg No - FD 224)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 231, 88M)

M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge.

Almirah med steel (Drg No - FD- 1032)

Almirah large steel (Drg No - FD -1031)

Book case steel 1675 x 840 x 305 (Drg No - FD-1028,90M)

Book Shelf Open Small/LargeSteel (Drg No - FD-69 M)

Chair steel tubular without arms (Drg No - FD-75 M)

Chair CB steel with arm (Drg No - FD-75 M)

Rack 6 tier steel (Drg No - FD-1038)

Rack Shoe Steel (Drg No - FD E6 MAP 02)

Table office officers steel (Drg No - FD 84 M,1003)

Table office clerk steel (Drg No - FD 84 M,1004)

Table 900 x 600 x 760 (Steel frame Particle board top) (Drg No - FD 1007)

Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008)

Teapoy verandah (Drg No - FD 35 / 255 / 383)

Bed hard steel (Drg No - FD / E6 / MAP / 8 (R))