Convention Centre at Dharmsala Distt. Kangra Himachal Pradesh SH - Civil, WS and SI, EI, Fire Fighting, Fire Alarm system and Surveillance System etc.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift as per direction of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra.. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift as per direction of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra..Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift as per direction of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra.. All kinds of soil

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift as per direction of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra.. -- Ordinary rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto site of waste. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for additional Lift of 1.50mtr or part thereof in excavation / banking excavated or stacked materials including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. In all kind of soils

Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Stone/Boulder filling under floor dry hand packed including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling in all height and removal of the same for in situ-reinforced concrete & plain concrete work as per the pattern specified including pointing, rendering and including cost & carriage of materials up to all lead & lift complete and as per direction of Engineer in charge

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Stairs, (excluding landings) except spiral_stairs

Columns, Pillars, Piers, Abutments, Posts and Struts Circular in Plan

Edges of slabs and breaks in floors under 20cm width

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(TATA/Sail/Jindal Make or equivalent ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. “( Note :- Cement content considered in this item is @ 340 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). :

Foundation footings bases of columns and the like and mass concrete.

All works above plinth level upto all height floor

Providing and laying weep hole in brick masonry / stone maonry / plain reinforced concrete in abutment,wing wall,retaining wall with 100 mm dia mm PVC pipe extending through the full width of the structure with slope of 1:20 as drawing and technical specification including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Back filling with well geaded stone boulders behind Retaining wall completeincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation , plinth and also in superstructure above plinth level up to floor height in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. (2nd class)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation , plinth and also in superstructure above plinth level up to floor height in all shapes and sizes in. Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. (2nd class)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Random rubble masonry with hard stone of approved quality in foundation and plnth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size ) Upto plinth level in Cement Mortar 1:6 ( Cement : 6 Coarse Sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing wood work in frames of false ceiling , paratitions tec sawn and fixed in position with necessary stainless stel screws etc including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Sal wood.

Providing wood work in frames of door , windows, clerestrory windows and other frame wrought frames and fixed in poition with hold fasts lugs or with dash fasteners of required dia & length ( Hold fasts and lugs or dash fasteners shall be paid sepertely including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. ( 2nd class Teak wood)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dia mm bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 40mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm,or doors, windows and clerestory windows with hinges and necessary screws including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (35 mm thick shutters in 2nd class teak wood )

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .2nd class teak wood

Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm ,Particle board with decorative veneering on both sides including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bright finished brass Tower bolt heavy duty ( ISI )Mark of approved quality with necessary screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Stainless steel Tower bolt heavy duty ( ISI )Mark of approved quality with necessary screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bright finished brass100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Godrej or equivalent)

Providing and fixing Keyless mortice door locks on toilet doors of godrej or equivalent 100 mm and a pair of lever handles of approved quality with necessary screws etc. complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Fancy Delfino pull handle in PT finish.bright finished with screws etc. complete: including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Godrej or equivalent)

Providing and fixing ISI marked, Stainless steel heavy duty hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Godrej or equivalent)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Godrej or equivalent)

Supply and installation of Fabric stretch system by using 15mm thick vinyl Track system in combination of 25mm thick woodwool board covered with FR grade fabric to achieve Class B sound absorption Construction of Frame work Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed to 12mmm thick plywood which is in turn fixed o the wall (Ply wood is provided to maintain the overall gap of 100mm) in horizontal direction with the help of suitable fastners at 600mm c/c then an another 25mm thick GI wall channel is fixed vertically over the horizontally laid wall channel at 600mm c/c Cavity Filling The frame work shall be back lined by using 50mm thick 1000 GSM polyester woolBoarding A layer of 25mm thick, square edge, wood wool borads of size 600x1200x25mm having density 400kg/m3 is fixed to 25mm thick GI wall channel by using suitable rust protected metal fasteners of size 4.5mm Ø x50mm length . Each panel should receive minimum 6nos fasteners. Wood wool boards to be butt jointed and ensure boards are in plumb level.Finishing Ply Wooden base of 10mm thick x 50mmwide is first installed along the periRmt of 25mm thick wood wool boards, by using metal fasteners at every 300mm centres . 15mm high tracks to be installed on wooden base by using metal fasteners at 150mm centres. Polyester wool of 500gsm x 10mm thick is adhered above wood wool boards by using adhesive ( only spots). FR Grade Fabric of available width is then aligned to the Stretch vinyl tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch vinyl tracks and secure into the locking jaws, so that it will be smooth and free of wrinkles. Use tools as recommended by manufacturer.Approved Makes - 1.Wood wool Board - Hera Design / Anutone / Aerofiber / approved equivalent 2.Polyester wool – Unique non woven / Hill point / Prominent Insulation /Aerofiber/ approved equivalent 3.Metal frame work – Gypsteel/Diamond /Hillpoint / Aerofiber/approved equivalent 4.Fabric and Tracks - Anutone /Aerofiber/Hillpoint/ approved equivalent Note - 1. Vendors to submit all test certificates (Acoustics and Fire) 2. Refer drawings for over all depth of the system

Providing and fixing in wall lining prelaminated with decorative plywood one side and other side balancing lamination IS: 14587:1998 marked, over wooden frame and water proof membrane include frame work as per site requrement work with necessary fixing arrangement and screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (18mm thick)

Providing and fixing wall paintings kangra Art of approved quality over plywood inclduing wooden frame and water proof membrane with necessary fixing arrangement and screws etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fiing ALUK aluminiumcurtain wall glazingsystem (SL50)with GI unit(minsulated Glass Unit) for visionpannel and spandrel panel of approved make the mullionsand transoms are squre cut and assembled using a combination of factory fitted cost face fixed junction spigots and concealed anti ratation spigos. or by transom blocks. This strong construction is easy to fabricate and allowa greater accuracy and enhanced stability . High qualityconstruction .The mullion jointing uses a speciallydesigned sleeve spigot for each mullion for a high quality joint. Cost efficiency.All machine operations can be performed on drill jigs with punch tooliing fordrainage toreduce fabrication timeand cost and achieveconsistent quality and all extruded aluminium sections towithstand wind pressure of 150kg/sqmat all height and fabricated fixed at all levels, elevation and heightsto the masonry/RCwalls withnecessary clamps , brackets and anchor fasteners , Glass will be fixed withwith pressure plate ad cap at every vertical and horizontal grooves .All clamps and brackets shall be mild steel Hot dip galvanised minium80 microns thick.The extruded aluminiumsection shall be Powder coating of minimum60 microns . Any other fastening straps , nuts, bolts, washers shall be of HILTI or Fischer make or approved eq. and of SS 304 grade.Rate shall be include to provide Fire stops at all floorlevels. EPDM gaskets, open cellpolyethylene backer rodsetc. The structural glazing sealant shall be Dow Coming and weather sealant shall be Dow Coming . All sealants shall be black in colour.( Fixed/Openable / Mesh ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes and Door handle, lock and stopper etc for fixing required door fittings, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing double action hydraulic door spring of approved brand and manufacture conforming to IS 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Steel work in built up welded / tubular (round, square or rectangular hollow tubes etc.) in trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. (Make TATA/SAIL or equivalent.) Hot finished welded type tubes

Steel work welded in built up sections/ hollow section framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. (Make TATA/SAIL or equivalent.)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. with top cover inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. (Make TATA/SAIL or equivalent.)

Providing and fixing M.S BP Sheet 1.66mm to 2mm thick (Tata/SAIL or Jindal make) in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. (Make TATA/SAIL or equivalent.)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying 20-25 mm thick kota Stone slabs in flooring laid on 12 mm (average) thick cement mortar 1:4 (1 cement: 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying 20 mm thick Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and fixing 18 mm thick (Agria white) marble. gang saw cut,mirror polished, premoulded and prepolished, machinecut for flooring, kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick basecement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and fixing 18 mm thick (Agria white) Marble work work gang saw cut (polished and machine cut)marble of thickness 18 mm in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and fixing 18 mm thick polished Udaipur green marble. gang saw cut,mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick basecement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying 18mm thick polished Udaipur green marble slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) including pinting with white cement mortar 1:2( I Cement : 2 marble dust with pigment to match the shade of the slabs, including rubbing and polishing complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring , kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including rubbing and polishing complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing edge moulding to 18 mm thick Granite/marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying Kadappa stone in flooring 20mm (average) thickness base of cement mortar 1:4(1cement: 4 sand) laid over and jointed with pigment to match the shade of Kadappa stone including rubbing and polishing complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. 20mm.thick

Providing and laying 20mm thick Jaislmer stone in flooring 20mm (average) thickness base of cement mortar 1:4(1cement: 4 sand) laid over and jointed with pigment to match the shade of Jaislmer stone inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. 20mm.thick

Providing and fixing 20mm thick Kadappa stone tiles in skirting, dado, walls, pillars and risers of steps laid in 12.5 mm thick cement mortar 1:3 (1cement and 3 sand) laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and mirror polishing at all levels complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying Trimix 100mm thick flooring including (a) Laying levelling and broom finishing 100mm thick M20 grade with pure OPC cement concrete using Trimix method and providing dowels joints 400mm C/C distance, centrally placed in channels, groove cutting and filling , pre and post cleaning edge cutting if required curing upto 21 days inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying 50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cementhardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying ceremic untiskid floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make like KAJARIA,NEXON,NITCO,STANZA, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. Size of Tile 600x600x12mm

Providing and fixing Ist quality300x450x10mm any higher size 8/10mm thick Vetrified glazed tiles conforming to IS: 15622 of approved make like KAJARIA,NEXON,NITCO,STANZA of size 100x200mm , in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge.

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make like KAJARIA,NEXON,NITCO,STANZA, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. Size of Tile 600x600x12mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge. Size of Tile 600x450x10mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge : -- Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Providing and fixing (Laminated wooden flooring of AC-5 ) with comercial use planks of size (1195mmx154.5mmx12mm) along with warter proof memberane complete in all respect inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Providing & fixing local stone cladding of approved size as per architecturl drawings in all colours and shades as approved by Engineer-in- charge over 12 mm thick bed of cement mortor 1:3(one cement :three course sand)and jointed with grey cement slurry @3.30kg /sqm complete in all respect. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Providing and fixing HPL sheet 5-6 mm thick on walls surface including frame work of prefabricated MS Structural steel including cutting to required shape and size of work with necessary fiitings and fixture complete to the entire satisfaction inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Providing 8 mm thick armstrong ceiling with ceiling tiles 600x600mm over glavanised steel for all level, including frame work of glavanised steel with necessary fitting and fixtures complete in all respect inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to all height above floor level, over glavanised steel including frame work with necessary fitting and fixtures in between and reinforced with rabbit wire mesh fixed to glavanised steel frame completed inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

Flat surfaces

Curved surfaces

Extra for sunk or raised mouldings in the plaster of Paris(Gypsum anhydrous) ceiling.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer dia mm M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron periRmt wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing periRmt channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the periRmt of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and periRmt channel with the help of dry wall screwsof size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of periRmt channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.)

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with preprinted iron J or L hooks, bolts & nuts 6mm dia & preprinted G.I. limpet and bitumen washers complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.)

Providing and fixing valley 60 to 90 cm overall 0.60mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic outing of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.)

Providing and fixing 15 cm. wide 45 cm. overall semi circular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. - 0.63 mm thick sheet inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.)

Providing and fixing 6mm thick toughened glass make Tata/ Saint Gobian with 1.52mm pvb ( poly vinyl buty ) in roofing with necessary glue, rubber gaskets and all other fitting and fixtures required over a frame work of SS (Grade-304) including Frame work complete as requiredinlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cowdung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat

With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm dia mm and weighing not less than 440 grams.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

15mm cement plaster in single coat on fair / rough side of brick/concrete/stone walls for interior plastering and exterior upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:5 ( 1 cement :3 sand) including carriage of material upto all leads and lifts and as per direction of Engineer Incharge.

6mm thick Cement plaster to ceiling including sides and bottom of beams, soffits of stairs, ramps etc. with cement mortar 1:3 (1cement : 3 fine Sand) including curing and carriage, leads of all kinds of materials and scaffoldings etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction ofEngineer incharge.

Providing and applying primer of approved brands / Asian/ Nerolac / or equivlent over a prepared base of putty on walls to prepare the surface even and smooth complete.:including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Applying Two or more coat of Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops dust, loose materials and other foreign matter sand papered smooth to give final finish to the surface complete up to all floor level. including carriage of material in all lead and lift & as per direction of Engineer in charge. Make / Asian/ Nerolac / or equivlent

Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of applied @ 0.80 ltr/10 sqm of approved brand / Asian/ Nerolac / or equivlent :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and applying primer of approved brands / Asian/ Nerolac / or equivlent With ready mixed pink or Grey primer on wood work (hard and soft wood) :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Painting two coat excluding priming coat with enamel paint to give an even shade on new wood and wood based surfaces/materials including cleaning the surface of dirt , dust and other foreign matter, sand papering and stopping including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .Readymixed paint other then white Make / Asian/ Nerolac / or equivlent

Applying 2 or more coat wall painting with acrylic emulsion paint,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make / Asian/ Nerolac / or equivlent

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make / Asian/ Nerolac / or equivlent

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50mtrs..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge . (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet Mix macadam (WMM) Specifications including premixing the materail with water at OMC in for all leads and lifts laying in uniform layers with mechanical paver finisher in sub base / base course on well prepared surface and compacting with vibratory roller of 10 tonne capacity to achive the desired density , complete as per specifications including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofingcement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofingcement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:after surface preparation, first layer of slurry of cement @ 0.488 kg/sqmmixed with water proofing cement compound @ 0.253 kg/sqm.laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm.third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.fourth and final layer of brick tiling with cement mortar (which will be paidfor separately..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying in cast iron cover with frame for man holes for frame of internal dimension 460x610mm rectanguler CI cover (light duty single sear pattern -I)the weight of frame 15 kg and of cover to be not less than 23 Kg including carriage of material upto all leads and lifts and as per direction of Engineer incharge

Providing and laying Make NTC or equivlent 80mm thick factiory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge

80mm Thick

40mm Thick

Seed Grassing with Special Grade -1 grass including watering and maintunance of the lawn for 30 days or more till the grass form a thick lawn free from weeds and fir for movoing including supplying good earth needed including carriage of material upto all leads and lifts and as per direction of Engineer incharge

Tree plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 0.90 mtr depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material upto all leads and lifts and as per direction of Engineer incharge.(Plants of mango , Guava, Arjun, Jacaranda , Caesaleinia Pulcherrima, Calateha Lutea, Ficus Pumila , Clusia Guttifera and Tecona stans etc. etc. ht. 0.60 mt.to 1.50 mtr

Tree plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 2.00 mtr depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge.(Plants of Bottle Palm, Arica Plam Alstonia Scholaris, Bauhinia Purpurea, Golden Meleluca, Lagstonia Speciosa, Michaelia Champaka, Terminalia Catappa, Terminalia Mentaly and Veitchiamerrillii-Green. ht. 3 to 3.5mt

Tree plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 0.60 mtr depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge.(Plants of Emermy, Golden Doranta, Euonymus , Hibiscus, Creeper rose, Lillies. Allamamda Neriifolia, Hymenotallis Littorails , Lantanana Sellowiana , Pennisetun Green ,Pennisetun Rubrum ,etc.ht. 0.30 to 0.45 mt

Providing and fixing STEEL TRIO AUTO BIN, CAPACITY- 70L, TRIPLE COMPARTMENT HS Code 73239390 Model No. SWB70L-3C .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixingStainless Steel 304 Dustbin SWB70L-3C Touchless Trash Bins TRIO AUTO BINS .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

C.I. (Cast iron benches Super deluxe bench based on approved of with wooden/brown/yellow colour. Stand/legs made up of decorative cast iron material for mounting, 15inches in width and weighing approximately 85kg complete including the cost towards loading/ unloading transportation fixing if applicable at site..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing both side informative signage With led light aluminium composite panel base with acrylic letter as per direction .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing , installation ,testing and commissioning of drinking water cooler of Blue Star 150 litre or equivalent brand ,stainless steel body ,and in built purification system complete in all respect as per direction .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes/ sewarage pipe 6kg pressure conforming to IS : 13592 Type A make finolex or equivalent, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

150 mm dia mm

110 mm dia mm

75 mm dia mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A make finolex or equivalent, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

150 mm dia mm Plain Bend

110 mm dia mm Plain Bend

75 mm dia mm Plain Bend

150 mm dia mm Door bend

110 mm dia mm Door bend

75 mm dia mm Door bend

150x150x150 mm Door Tee

110x110x110 mm Door Tee

75x75x75 mm Door Tee

150 mm dia mm Coupler

110 mm dia mm Coupler

75 mm dia mm Coupler

Cowl 110 mm dia mm

Providing and fixing unplasticised - GI Clamps of approved design fixed with steel screws and plastic plugs plugs, screwed with M.S. screws and making good the wall etc. complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge make finolex or equivalent.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.

(16 mm OD) pipe

(20 mm OD) pipe

(25 mm OD ) pipe

32mm OD ) pipe

Providing and fixing GI Pipes TATA/Jindal or eqivalent complete with GI fittings , clamps including cutting making holes in walls and in under ground conditions as per the direction of engineer in Charge..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15mm dia mm nominal bore

20mm dia mm nominal bore

25mm dia mm nominal bore

40mm dia mm nominal bore

Providing and fixing Gun metal gate Valve with CI wheel complete as per the direction of engineer in Charge..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15mm dia mm nominal bore

20mm dia mm nominal bore

25mm dia mm nominal bore

40mm dia mm nominal bore

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank make Sintex or equivalent including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Stain less Steel A ISI 304 (18/8) kitchen sink as per IS: fittings and brackets, cutting and making good the walls wherever required :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing counter top vitreous china wash basin Jaguar make Cat No.CNS-WHT-303 including c.p. waste and waste pipe complete set Hindware /Cera make or equivelent including carriage of materils all leads and lifts. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Wall Hung WC with UF Soft Close Seat Cover, Hinges, Accessories Set, Size : 350x750x340 mm cat. No. DIS-WHT-93951UF including Single Piece Slim Concealed Cistern Body with Installations Kit & “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) cat.-No. JCS-WHT-2400S and Control Plate D’arc cat No. - JCP-CHR-372415 including painting of fittings and brackets, cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing viterous china water closet Jaguar make Cat No.CNS-WHT-853S220SPPSM RIMLESS SINGLE PIECE WC with PP Soft close Slim seat cover , Duel Flush Cistern Fittings , Fixing Accessories Set. Size 370x665x750mm S. Trap -220mm .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Grab bar-Vertical Swing-Satin Jaquar / Equivlent make Cat no. WAC-SAP-BG0800CS wall mounted or equivalentincluding fixing as per the direction of Engineer in Charge . For disabled person .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Grab bar-Vertical Swing-Satin Jaquar / Equivlent make Cat no. WAC-SAP-BR0600 CS 692mm long Satin including fixing as per the direction of Engineer in Charge . .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Urinal with senser size(mm) 330x275x550mm Jaquar/Hindware/cera /Somany make or equivalent catalog No. URS-WHT-132530 and sencer catlog no SNR-STL-51083 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing white viterous Glass division plate of Jaquar cat no JSE-CHR-810UC450X for urinal of size 900 mm X 450mm complete and sensor cat no STL-51083 (Jaquar or equivalent) and as per specification , drawing .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 6 Kgf pvc Poly plast floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors(110 mm to 75mm dia mm) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & Fixing hand shower (health faucet) Jaguar make Cat No. ALD-573 with 8 mm dia, 1.2 m long flexible tube & wall hook or equivelent.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Click Clack Waste 32mm Size Half Thread With 80mm Height - ALD-709 including Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange ALD-769L250x190.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 32mm dia

Providing and fixing 32mm dia PVC pipe for wash basin .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bevelled edge miror of superior glass Saint Govind/Modi guard or TATA make with C.P. set of stud and brass screws and washers.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with screw , rwl plug etc..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Saint Govind/Modi guard or TATA make

Providing and fixing ACN-1151N, Toilet Roll Holder with Stainless Steel, Flap jaquar make or equivalent including all cost, conveyance and labour charges etc complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 32mm dia

Providing and fixing ACN-1135N, Soap Dispenser with Metallic Bottle, jaquar make or equivalent including all cost, conveyance and labour charges etc complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & fixing C.P. Towel ring Jaguar make Cat No. CAN-1121BN or equivalent including carriage of materials in all lead and lifts

Providing and fixing ACN-1111SM Single Towel Rail 600mm Long, Stainless Steel Jaquar make or equivalent including all cost, conveyance and labour charges etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing C.P. Towel rack with lower hanger Jaguar make AKP-35781 PS or equivelent including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing KITCHEN FAUCET CON-309KNM Single Lever Sink Mixer with Swinging Spout (Table Mounted) with 450mmm Long Braided Hoses, jaquar make or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing un plasticised PVC Connection pipe 45cm long with brass union complete in all respect. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing FAUCET RANGE OPP-15011BPM Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses, jaquar make or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Bib cock (strainght line model) with wall flenge Jaguar make Cat No. CON-037KN or equivalent with all accessaries including cutting and making good the walls wherever requiredincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing C.P. pillar cock with base flenge Jaguar make Cat No.COP-011PM or equivalent including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing PPR/Composite materail Gate Vale with wheel including fixing with pipes complete as per the direction of Engineder in Charge.

20mm dia

25mm dia

32mm dia

Providing and fixing 125 mm stainless steel square grating of approved brand including cutting and making good the walls wherever required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Thermostatic mixer no. ARC-87681 K Aquaman Exposed part kit of Thermostatic Shower Mixer with concealed body of Mixer no. ALD- 661, with spout no. OHS - 35495 , overhead shower 150x150 square with Rubit cleaning system and shower arm dia 20mm & 600 mm long round shape with 90 deg. bend for wall mounted shower with flange no. SHA-479L600 and spout no. SPJ-81429 spout with wall flange including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing COP-057PM angular stop cock with wall flange, Jaguar make or equivalent with all accessories including cutting and making good the walls wherever requiredincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing ACN-1131N, Soap Dish Holder, jaquar Make or equivalent including all cost, conveyance and labour charges etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing COP-057PM angular consealed cock with wall flange, Jaguar make or equivalent with all accessories including cutting and making good the walls wherever requiredincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Double Coat Hook Jaquar make Cat No. AQN-7761 or equivalent including cost, conveyance and labour charges etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with CI brating brick masonry cj\hamber with water tight CI cover with frame of 300x300mm Insde) the weight of the cover not less than 4.50kg frame to be not less then 2.70kg as per standard design (100x100 Size P Type) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing shower enclousres of Jaguar/ JSC- CHR-R820 W1620 L Ritz collection wall to wall enclosure with fix glass and openable door fixed with wall with 8 mm thick glass Size with height 1950 mm width 1601-2000mm including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : - Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Inside dia mm 80x90 cm and 60 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)

Inside dia mm 80x90 cm and 75 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)

Inside dia mm 80x90 cm and 90 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)

Inside dia mm 80x90 cm and 105 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)

Inside dia mm 80x90 cm and 120 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)

STP Supply, Installation,testing & commissionning of 150 KLD Sewage Treatment plant based on MBBR Technology with UF treatment in RCC works including Bar Screen and Oil and Grease chamber with Equalization Tank, Anoxic tank with Anoxic arrangements, Aeration tank, Tube Settler tank, Filter feed tanks, treated water tank, UF permeate tank and sludge holding tank, sump pit etc all with walkway platform as required. All STP works shall be comprise with bar screen, oil skimmer, 2 nos of submersible type Sewage transfer pumps(W+S), Submersible Mixer, MBBR media, Tube deck media, 2 nos. of sludge recirculation pumps from MBBR to anoxic tank (w+s), 2 nos. of sludge recirculation pumps from Tube Settler to anoxic tank (w+s), 2 nos of Filter feed pump (W+S), 2 Nos of Trilobe Air Blower with Motor (W+S) for EQT and SHT and for MBBR Tank, MSEP Pressure Sand Filter and MSEP Activated Carbon Filter with respective Filter Media with face piping, coarse and fine diffusors, 2 nos of Dosing pump and 2 nos of Dosing tank, 2 no. centrifuge feed pump screw type and centrifuge, UF system on skid arrangement with (w+s) pumps, HPN type transfer pumps for flushing, horticulture water and Electrical double door Control panel, 5 nos of Electromagnetic flow meter, 1 no. of pH meter, pressure gauge, lvl controller etc, all the Equipments with all Necessary pipings and fittings and electrical cables and cable trays etc. complete all required for successfull commissiooning. (All pumps for UF System is N+1). including carriage of materials up to all lead and lift as per direction of Engineer-in-charge.including opration and maintanace for 1 years and including all civil work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge . (Polycab,havells make or as approved by site engineer)

Group A.

Group C.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF) single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Wiring for twin control light point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LF PVC insulated copper conductor single core cable etc. as required (Polycab,havells make or as approved by site engineer) ( Group-C) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing two module stepped type fan regulator on the existing modular plate switch box including connections etc. as required. (Legrand, Havells, make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing following modular switch/ socket Single pole 5/ 6 Amps one way Modular switch.on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Single pole 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing PVC batten/ angle holder including connections etc. as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (Polycab,havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Polycab,havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

1 x 1.5 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells make or as approved by site engineer)

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.(polycab, Diplast make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

20 mm dia. ISI marked, PVC conduit

25 mm dia. ISI marked, PVC conduit

40 mm dia. ISI marked, PVC conduit

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand,havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Single pole MCB 6 / 32 A

MCB Double pole 32Amp

MCB Triple pole and neutral 63 Amp

RCBO DP 32A / 240 V 30 mA sensitivity

RCBO DP 40A / 240 V 30 mA sensitivity

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Double door-6 way

Double door-8 way

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Double door-4 way (4+12),horizontal type

MCB DB 8 way TPN Double door phase segregation type

MCB DB 12way TPN Double door phase segregation type

Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha,Bajaj,Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

a) Ceiling Fan 1200 mm sweep, category-A

b) Ceiling Fan 1400 mm sweep, category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by site engineer)

Exhaust Fan, Light duty, 300 mm sweep

Exhaust Fan, Heavy duty, 380 mm sweep

Providing and installation of stationary storage type Electric water heater Andris Slim 30 ltrs Geyser Racold Make (Geyser) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.(Racold,crompton,Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

30 Liter capacity water heater (Cat-A)

Instant heating type 3 Ltr capacity Geyser

Centralized Hot Water System Providing, installing, testing & commissioning of Hot Water system as per the following details complete in all respects

A.HOT WATER MIXING TANK for Guest Rooms of cap. 2500 Ltrs complete with inlet cold water ,inlet/outlet, drain connection with flanges, with required manhole with bolted cover, including 4 no’s ball valves, 2 no’s dial type thermoRmt, 01 no’s automatic air vent valve, 01 no’s thermal bleed valve, 01 no’s strainers complete in all respects. The tank shall be fabricated out of Stainless Steel of thickness (shell 5 mm & dish 6 mm), epoxy coated and duly insulated with 100mm thick Glass Wool insulation with 24 gauge aluminium cladding with MS supporting structure ladder & drain valve. with electric backup heaters of 36 Kwh, element to be provided including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply of Heat Pump Air Source ISS-10C Heat Pump – 39 kw to heat water up-to 550 C to 60 Deg. C COP-4.6 (Highest in India at 55-60 Deg. C) Highest COP in Industry in India With Self Diagnostic PLC Controls With Automatic Defrost Digital Temperature Readout 460% Heat Efficiency Long Life Compressor CopelandHeat Exchanger Copper Tube in Steel Case=2nos Make-Inter Solar including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

a)Providing of motor pump set of required LPS & head for water circulation between heat pump and auxiliary tank with necessary m.s. stands and supports etc. with 1 number each strainer, non-return valve and 2 number Ball valves, pressure Gauge(0-5kg/sq.m) to circulate the hot water =1 n0s b).Supply of Control Panel with all accessories like MCBs, contractors, relays, control fuse, indicators with Teflon coated sensor wires for automatic circulation of pumps between Heat Pump & tank and for electrical backup in 2 compartments of 18 kw each i.e. 2*18 kw c) NTERCONNECTION PIPING Supply of CPVC Piping Dia. 50NB with necessary Fittings with 13 mm Thick Nitrile Insulation with UV Protected Coatingd)PUMPS BUILDING CIRCULATION : (Make-EBARA, Grundfos, KSB)2 (1W+1S) No of Pump of required LPS & head for water circulation between hot water tank and Building, with 1 number each strainer, non-return valve and 2 number Ball valves, pressure Gauge(0-5kg/sq.m) with M.S stands ,Supports etc.=2n0s e)Providing of timer controlled motor pump set for automatic circulation of the hot water in the building for instant hot water-Electrical Control Panel=1 nos

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(Legrand/Havell,s make) 2 modules (78mmx78mmx50mm) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply and fixing of Popup type 2x3 moduleMatt Al finish flush mounting boxes under floors or under table tops complete wit 2 No 6A 3 Pin sockets Arteor Model Legrand,RJ 45 Cat 6 UTP retractable kit 1Module USB/Micro-USB retractable kit 1 No.as desired at site . The Popup boxes should be of Legrand , Schneider , Honeywell Makes only. The popup box should be complete with 5A multi pin socket, 6A 1-way modular switch & RJ 45 Socket complete including making connections. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Telephone socket outlet, Modular.

TV. Socket outlet, modular.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing computer points consisting of G.I modular type box , front and cover plates with snap fit type RJ45 socket complete with making connection using Cat 6 or equivalient type cable including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required (legrad,Havells make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

G.I. earth plate 600 mm X 600 mm X 6 mm thick

Copper earth plate 600 mm X 600 mm X 6 mm thick

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing G.I. tape 50 mm X 6 mm thick on surface of wall or in pipe complete as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 6 SWG dia Copper wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Polycab,Havells or ISI make as approved by site incharge) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Armoured cable 6sq. mm (2 core)

Armoured cable 10 sq. mm (4core)

Armoured cable 35sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Armoured cable 150 sq. mm (3.5 core)

Armoured cable 240 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 Rmt below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab, Havells or ISI make as approved by site incharge) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Armoured cable 6sq. mm (2 core)

Armoured cable 10 sq. mm (4core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 150 sq. mm (3.5 core)

Armoured cable 240 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Providing and fixingSurface mounted 20 watt Wipro make LED Mirror light fixture cat no. LL20-111-XXX-65 NE3 20W or of equivalent K lite/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixingSurface mounted 10 watt Wipro make LED Mirror light fixture cat no. LL20-111-XXX-65 NE3 10W or of equivalent K lite/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Surface mounted 6watt K Lite make LED foot light fixture cat no. 2747 or of equivalent Wipro/Bajaj/Philips make complete with all accessories, connections, testing and commissioning etc. as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Surface mounted 2x6 watt K Lite make LED Up downt light fixture wall cylin mini cat no. 3654 or of equivalent Wipro/Bajaj/Philips make including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Surface mounted 6 watt K Lite make LED Bulk Head light fixture 7W Wipro make cat no. LW 07 -141-XXX-57-G1 or of equivalent K Lite/Bajaj/Philips make complete in all respects with required accessories including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Outdoor Led Strip heavy duty flexible12w/m 12V (1 Pack of 5 Mtr.)1100 lumens/mtr ,120 LED/mtrPCB 5mmLEDOS make Cat No.LS 21S.600/4000/300K IP65K Lite Make LED Strip for Cove/facade Lighting including drivers for suitable for installing in cove. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Outdoor Led Strip heavy duty flexible17w/m 24V (1 Pack of 5 Mtr.)1750 lumens/mtr ,168 LED/mtrPCB 5mmLEDOS make Cat No.LS 29S.600/4000/300K IP65K Lite Make LED Strip for Cove/facade Lighting including drivers for suitable for installing in cove. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Recess mounted 40 watt K Lite make LED light fixture cat no. 3354 or of equivalent Wipro/Bajaj/Philips makecomplete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing fSurface/Recess mounted 12 watt K Lite make LED light fixture cat no. 3342 or of equivalent Wipro/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface /Recess mounted 7 watt K Lite make LED light fixture cat no. 3285 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 180 watt K Lite make LED Flood light fixture for facade lighting cat no. 4202 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning as required and as approved by site engineer. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 120 watt K Lite make LED Flood light fixture for facade lighting cat no. 4201 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 60 watt K Lite make LED Flood light fixture for facade lighting cat no. 4200 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 50 watt K Lite make LED Flood light fixture for facade lighting cat no. 6805 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

SITC of Surface mounted 30 watt K Lite make LED Flood light fixture for facade lighting cat no. 4286or of equivalent Wipro/Bajaj/Philips, including making connections, testing etc. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 12 watt K Lite make LED Flood light fixture for facade/planter lighting cat no. 4271/72 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of Surface mounted 10-12 watt K Lite make LED bollard light fixture for land scape cat no. 4799 or of equivalent Wipro/Bajaj/Philips including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and installation of LED Decorative fitting 30 W K Lite Make model Imperial Mini or of equivalent Wipro/Bajaj/Philips including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing of Gate Light Post Top Vista LP09S, Product Code: LP09S-501-XX-57-XX, 4000K, 45Watt Wipro Make and complete with all accessories including making connections, testing etc. as required Philips/Bajaj/Havells/Jacquar including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying,installation,testing and commissioning of Astronomical time switch 2 output per phase and suitable for single, capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) withmanual override facility with 12/24 hour display format with suitable battery andindication for relay status i/c programming at site complete as required (Legrand,Havells make including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, Installation, testing and commissioning of "Do Not Disturb" and MMR Control Unit Make -Legrand, Model-Myrius Next Gen Cat no. 6792 56 and 6792 57 in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells make including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, Installation, testing and commissioning of 40A Power Contractor with two NO and signaling auxiliaries for contractors conforming to IEC/EN 61095 for single Phase switching of internal lighting in the room Make Legrand, Model-CX3 Cat no. 4125 45 and 4124 31, as per direction and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, Installation, testing and commissioning of 16Amp. Single Phase Key FOB Switch Make-Legrand, Model-Myrius Next Gen, Cat no. 6792 53 with three no of keys Cat. no. 6792 55 for switch on and off light in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells make including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts.

63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Legrand make Cat No. 027029 ,63 Amp FP, MCCB

100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB

200 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB

Supply and Erection testing and commissioning of K lite make 4.2 m long decorative pole as per catalogue No.K Lite make Cat No.KP 4340,Model and with decorative double arm bracket for supporting Decorative 2 No.30W each LED fixtures o or equivalent along of Twinkle/Bajaj make with 2way single door MCB DB with 6 Amp. complete in all respects as required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply and erection of DWC HDPE Pipe 1m below ground level including excavation and back filling as may be required at site Dura line/TeleRex/Astral makes including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

160/136 mmdia

120/103 mm dia

63/51mm dia

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Heat Detector )(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Smoke Detector )(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.. (beam detector )(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of addressable fire control module complete as required(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of addressable manual call point complete as required.(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Duct detector having Intelligent addressable Multi criteria Detector( Photo + Rate of Rise cum Fixed)(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.(siemans make or equivalent as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and fixing of Double sided LED signage with built in battery back-up for 2 hrs.and all other fixing accessories as required ( BAJAJ cat. No. 220211 BESL 03 LED DSD WBB Red ) or equivalent approved List of make. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(polycab havells make or eq. as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

2 X 1.5 sq. mm

4 X 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

SITC of Talk back receiver AHUJA CCS-2300, 2-WAY COUNTER COMMUNICATION SYSTEM as per specification complete (MAKE: Ahuja or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Ceiling/ Wall Mount Speaker with operations from 3 to 6 Watts. (MAKE: Ahuja, JBL or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.(JBL,BOSH or eq. as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & installing self glow signs luminescent U-1000 Alu. sheet with 2 mm thickness sheet on the wall / ceiling etc for the size of (4''x12'' ) as reqd.(Make : Nightglow/FGE), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supplying and laying of 1.1 KV Grade 2 X 1.5 sq.mm. copper cables on surface / conduit complete with clamps etc as reqd. (MAKE: GLOSTER/ KALINGA/ GRANDLAY/ HYGLOW ), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supplying and laying of 4 x 1.5 sq.mm. PVC insulated PVC sheathed copper conductor armoured control cable of 1.1 KV grade complete as required. (From Main Fire Control Panel to the Repeater Panel). (MAKE: GLOSTER/ KALINGA/ GRANDLAY/ HYGLOW ), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Providing and fixing of following size of black enamelled MS conduit in recess / on surface including all accessories, proper saddling at every 1200 mm intervals and hooks, where imbedded in the wall, MS junction / pull boxes, GI fish wire, complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge.

40 mm dia Conduit

32 mm dia Conduit

25 mm dia Conduit

SITC of 3KVA UPS on line, Double conversion, Micro-processor controlled with LCD, Input Voltage: 230V, Freq : 40-70HZ, PF:0.95, Output : 220Volt ± 2%, Freq: 50HZ ± 0.05HZ, PF:0.8 with SMF batteries for 30min backup on full load. (Make: EMERSON/MICROTEK), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. (Polycab, Havells or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Speaker cable Single pair, 2-core, 1.5 sqmm

EPABX System SITC of Digital EPABX matrix model ETERNITY GE 12 S. EPABX shall have 48 analogue extensions which will be expandable up to 96 extensions, complete including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of 8 nos co-port 01 op console (Beetel cli phone), Beetel M90 Caller ID Corded Landline Phone with 16 Digit LCD Display,FSK/DTMF Compatable Caller ID,8 Direct One Touch & 12 Two Touch Memory,Volume Control for Speaker Phone,Music on Hold (Black)(M90), complete including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Main Distribution Frame (MDF) with Integrated Protection Module (IPM) complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UPS with battery to provided 4 hour back up, complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Telephone instruments, with necessary cable etc, complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Surveillnace System (CCTV) Providing and fixing COLORVU BULLET CCTV (Hickvision ModelDS-2CD1047G0-L or equivalent) IP 4 MP Color Vu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE, Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, fixing DOME NETWORK CCTV CAMERA ( Hikvison Model DS-2CD1343G0E-I or equivalent ) IP 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE; Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

SITC of 25X 100MTRS PTZ SPEED DOME CAMERA ( Hikvision Model DS-2DE4425IW-DE or equivalent) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25× optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, Two Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

SITC of 32 CHANNEL 4K H. 265+ NVR ( Hikvision Model DS-7732NI-K4 or equivalent), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160)resolution , incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port upto 6TB each, Two Years Warranty and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.

SITC of Power Supply ISI MARK including 3 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of RJ-45connector including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of 16 PORT POE SWITCH 75 WATTS including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of DC Connector including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Providing and fixing SAMSUNG Crystal 4K Pro 108 cm (43 inch) Ultra HD (4K) LED Smart TV with Voice Search (UA43AUE70AKLXL), (Black) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport . (Samsung /Sony make or its equivalent as approved by the Engineer incharge)

Providing and fixing Polycab make cctv 4+1 wiring for fixing of cameras in the existing PVC conduit as per requirement & three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.

Providing Hard disk (8TB hard disk Seagate make) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.

Providing and fixing of Crotomak make 12 U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex,Lepose make or as approved by site engineer) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

High Mast Supply of 12.5 Rmt long hot dip galvanized 12 Sided Polygonal Structure made up of High Tensile Steel Sheet confirming to BSEN 10025 S355 / ASTM 572 Grade 50 having Top dia mm 150mm , bottom 360mm , Sheet Thickness 3mm/3mm suitable to use with wind Velocity 47 m/s as per IS 875 Part (iii) of 1987 with Base Plate 25mm thick. The Standard of Galvanization as per BS ISO 1461. The Mast included all accessories ( GI Lightening Arrestor , Galvanized Head Frame with Covered Canopy , Avaition light Bracket , Trailing Cable 5 core 2.5 Sq.mm Copper Conductor , Weather proof junction box , Plugs and Sockets , SS Wire Ropes 6mm AISI 316 Grade , Two Way Suspension system , Double Drum Winch , 3 Phase Electric Motor ( Power Tool for winch Operation) , Lantern Carriage for 6 LED luminaires , Winch & Motor mounting Bracket duly HDG including all the hardware to fix the accessories at site. The Mast Suitable to use with 6 number Symmetrical orientation 300W LED Floodlights. Make : Valmont/BAJAJ./JINDAL/RR ISPAT including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply of 300W LED Floodlight made up of Cast aluminium housing with heat resistant toughened glass cover having lumen efficiacy of 120 Lumens/watt including electronic driver and 10Kv surge protection device complete with all respect. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make : Wipro/Bajaj./philps

Supply of MS Control Panel with 32 Amp TPN MC incomer and Motor Control Circuit with Suitable Contactors ( Lowering Raising of Carriage) with Timer Facility complete with all respect. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Constructoin of suitable shallow foundation with 'M 25' grade concrete suitable size foundation bolts /anchor plates for the 16 mtr and 12.5 mtrs high mast considering the tested soil bearing capacity at site at 2 mt depth with all materials & labour. Complete foundation design & calculation on basis of the load bearing capacity of the soil. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Erection of the 12.5 mtr. high mast with the help of suitable eqipments and wiring of luminaires with all wiring material & labour. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Provision of GI pipe earthing for High Mast with 2.5M long 40mm dia. G.I. pipe including connection of High Mast earth terminal with 25x3mm GI flats with all materail & labour 2 NOS. PER MAST. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

DG Set Supply and commissioning of 380KVA silent type DG set Cat No. CS 380D5P, Cummins engine make Cat No. QSN 14-G2, Engine BHP487, 380 KVA Cummins® ‘Q Series’ diesel generating sets, powered by Cummins ‘S Series’ engines, are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi-cylinder, conforming to BS 5514/ISO 3046. Alternator: Synchronous alternator of Stamford make suitable for continuous operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: › + 1.0 % Voltage regulation (max.) in static conditions › IP: 23 protection with insulation class H › Permissible overload of 10% for one hour in 12 hours of operation. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The control panel consists of following parts: Instrument cluster displaying water and lube oil temperature, lube oil pressure, engine RPM, running hours, battery charging current with LED Indications for battery charging failure, high water temperature and low lube oil pressure MCCB of suitable rating with overload and short circuit protection Combined Rmt for voltage, amps and frequency, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing termination, Indicating lamps for “Load On” and “Set Running” Instrument fuses duly wired and ferruled. DG set suitably housed in CPCB-II approved acoustics enclosure with standard accessories.i.e control panel, fuel tank, Battries with leads .No AMF Panel shall be required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply and commissioning of 320KVA silent type DG set Cat No. CS320D5P, Cummins engine make Cat No. QSL9-G15, Engine BHP 399,320 KVA Cummins® ‘Q Series’ diesel generating sets, powered by Cummins ‘S Series’ engines, are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi-cylinder, conforming to BS 5514/ISO 3046. Alternator: Synchronous alternator of Stamford make suitable for continuous operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: › + 1.0 % Voltage regulation (max.) in static conditions › IP: 23 protection with insulation class H › Permissible overload of 10% for one hour in 12 hours of operation. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The control panel consists of following parts: Instrument cluster displaying water and lube oil temperature, lube oil pressure, engine RPM, running hours, battery charging current with LED Indications for battery charging failure, high water temperature and low lube oil pressure MCCB of suitable rating with overload and short circuit protection Combined Rmt for voltage, amps and frequency, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing termination, Indicating lamps for “Load On” and “Set Running” Instrument fuses duly wired and ferruled. DG set suitably housed in CPCB-II approved acoustics enclosure with standard accessories.i.e control panel, fuel tank, Battries with leads .No AMF Panel shall be required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply and fixing of PVC insulated matt 2mtrx1mtrx3mm to prevent electric shock as reqd complete in all respects including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation, testing and commissioning of following MS exhaust pipe medium duty class-B complete with all accessories such as bends flanges,gasket, flexible connections at a suitable distance and supporting arrangement as required at site. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Main Synchronising Cum Load Sharing Panel Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. The panel shall be floor Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge Incoming 2 Nos. 1250 A,4P, 50 kA, ACB EDO ( For transformers) .1 set of 1250 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors. 2 Nos 800 A 4P 50 KA, ACB EDO ( For DG-1&DG-2) 2 Nos630 A 4P 36 KA, MCCB with MP release O/L,S/C & EF ( For DG-3&DG-4) BUS COUPLER :1250A 4P 50 kA EDO ACB including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Out Going: 1000A ACB FP 50 KA with MP release O/L,S/C&E/F.with spreader Links and ROM. 1No. 1000A ACB FP 50 KA with MP release O/L,S/C&E/F.with spreader Links and ROM. 1No. 630AMCCB TP+N 36 KA with MP release O/L,S/C&E/F.with spreader Links and ROM. 1No.400AMCCB TP+N36 KA with MP release O/L,S/C&E/F.with spreader Links and ROM. 2No.250AMCCB TP+N36 KA with MP release O/L,S/C&E/F.with spreader Links and ROM. 2No.125 AMCCB TP+N25 KA with TMD release O/L & S/C.with spreader Links and ROM. 2No.80 AMCCB TP+N16 KA with TMD release O/L & S/C.with spreader Links and ROM. 2No.

Floor Panels Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge

Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge

Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge

Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, installing,testing and commissioning of Electic Vehicle Charging Station ‎Kazam make Model ‎Kazam 3.3, Product Dimensions ‎27 x 19 x 13.5 cm; 2.02 Kilograms, Item part number ‎KZ001, Manufacturer Part Number ‎KZ001, Material ‎ABS PLASTIC, Colour ‎White, Special Features ‎Convenient to install, All weather and waterproof, Real time data analytics, IOT enabled charging, Wattage ‎3.3 KW, IP67 certified, Ip (max) 20 Amp, Vp(max) 280 Volts, Input voltage 1 Phase 230 V AC, Connectivity SIM Based, MCB & Fuse YES, Wire 3 wires ( live, neutral and earthing/ 2.5 sq mm), Output connector type 3 Pin socket, Output current 16A max, Output current 3.3KW, theft proof, B/W EVSE & CMS MQTT/TCP, All weather functionality YES Dust & water proof), Number of Outputs 1, Ambient Temperature -30C to 55C, Cooling: Natural. (Kazam or equivalent or as approved by the engineer incharge) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Provoding ,fixing , testing and commissioning of DC EV CHARGER 60KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC380V±15% AC input frequency: 45-65Hz DC output power: 60KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-250 Amp Connectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi*OCPP 1.6 *7-inch LCD screen/LED light complete in all respect as per entire satisfaction including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.

Supplying, installing,testing and commissioning of lift, (IEE/OTIS/Schindler/JOHNSON) 20 passenger, 1360 kg lift 5Stop (B2+B1+G+1+2 ) Speed 1.00Mps Pit Depth 1500 mm, Head Room 4300+ Machine room 1800 mm , Car Door Size WXH 1600mm X2000x 2100mm, Car Door opening 1000mm (W) x2000mm (H) Type Door Centre Opening Two Panels, Shaft Wall Concrete, Building Tolerance -25mm/+25mm of make Schindler Position 00100 Schindler 3000, Detailed Technical Specification: Landing door fire protection classification EN 81-58 E120 [ Two hours fire rated ], Counterweight location On the left side, Car access sides 1, Main stop 1, Door drive Fermator Compact, Drive and control Full Collective control – Simplex, Controller position In the right door jamb (LDU), Controller location Landing at floor 6 on side 1, Drive Power 4.6 kW, Main connection TN-S (3L+PE+N), Main power supply 415 V 50 Hz, Light power supply 230 V, Number of trips per hour 180, Installation method Scaffoldless with hoisting device, Maintenance period 12 months or equivalent complete at Site of Work in including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.

Supplying, installing,testing and commissioning of lift, (IEE/OTIS/Schindler/JOHNSON) 13 passenger, 884 kg lift 8 Stop (B1+B2+G+1+2 +3+4+T) Speed 1.00Mps Pit Depth 1500 mm, Head Room 4300+ Machine room 1800 mm Car Size WXDXH 1100mm X2000x 2100mm, Car Door opening 800 mm (W) x2000mm (H) Type Door Centre Opening Two Panels, Shaft Wall Concrete, Building Tolerance -25mm/+25mm of make Schindler Position 00100 Schindler 3000, Detailed Technical Specification: Landing door fire protection classification EN 81-58 E120 [ Two hours fire rated ], Counterweight location On the left side, Car access sides 1, Main stop 1, Door drive Fermator Compact, Drive and control Full Collective control – Simplex, Controller position In the right door jamb (LDU), Controller location Landing at floor 6 on side 1, Drive Power 4.6 kW, Main connection TN-S (3L+PE+N), Main power supply 415 V 50 Hz, Light power supply 230 V, Number of trips per hour 180, Installation method Scaffoldless with hoisting device, Maintenance period 12 months or equivalent complete at Site of Work in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager

Supplying, installing,testing and commissioning of lift, (IEE/OTIS/Schindler/JOHNSON) 13 passenger, 884 kg lift 4 Stop (G+1+2 +3) Speed 1.00Mps Pit Depth 1500 mm, Head Room 4300+ Machine room 1800 mm Car Size WXDXH 1100mm X2000x 2100mm, Car Door opening 800 mm (W) x2000mm (H) Type Door Centre Opening Two Panels, Shaft Wall Concrete, Building Tolerance -25mm/+25mm of make Schindler Position 00100 Schindler 3000, Detailed Technical Specification: Landing door fire protection classification EN 81-58 E120 [ Two hours fire rated ], Counterweight location On the left side, Car access sides 1, Main stop 1, Door drive Fermator Compact, Drive and control Full Collective control – Simplex, Controller position In the right door jamb (LDU), Controller location Landing at floor 6 on side 1, Drive Power 4.6 kW, Main connection TN-S (3L+PE+N), Main power supply 415 V 50 Hz, Light power supply 230 V, Number of trips per hour 180, Installation method Scaffoldless with hoisting device, Maintenance period 12 months or equivalent complete at Site of Work in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager

FIRE FIGHTING WORKS Supply, installation, testing & commissioning of Electric driven Hydrant Pump and Sprinkler Pump suitable for automatic operation consisting of the following:

a)Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump. b)Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump. c)Common bed plate of fabricated mild steel channel or cast iron type. d)Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. The pump shall be of the following specifications: Discharge - 2850 lpm Head - 60 m No. of stage preferred - Single / Double Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated Type of pump - End suction Make: Kirloskar, Lubi, Wilo

Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic operation consisting of the following:

a)Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary arrangement for testing of pump. b)Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump. c)Common bed plate of fabricated mild steel channel or cast iron type. d)Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications: Discharge - 180 lpm Head - 60 m No. of stage preferred - Multistage Speed RPM - 2900 Mover - Electric Motor Driven Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated Type of pump - End suction Make: Kirloskar, Lubi, Wilo

Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic operation consisting of the following:

a)Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump. b)Water coolled Diesel Engine developing suitable BHP at 2100 RPM for the Pump, common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 200 lts with first charge and manual oil pump set. c)Flexible coupling and coupling guard with the Pump, d)Common bed plate of fabricated mild steel channel or cast iron type. e)Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. f)Engine panel g)Sealed maintenance free batteries of 24 V, 88 AH h)Exhaust pipe of required length with asbestos lagging, muffler i)Day oil tank of 400 lts with first charge and manual oil pump set. The pump shall be of the following specifications: Discharge - 2850 lpm Head - 60 Mtr No. of stage preferred - Single / Double Speed RPM - 2150 RPM Mover - Diesel engine driven Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Type of pump - End Suction Make: Kirloskar, Lubi, Wilo

Supply, installation, testing & commissioning of Electric driven Water Curtain Pump suitable for automatic operation consisting of the following:

a)Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump. b)Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump. c)Common bed plate of fabricated mild steel channel or cast iron type. d)Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications: Discharge - 2280 lpm Head - 45 m No. of stage preferred - Single / Double Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated Type of pump - End suction Make: Kirloskar, Lubi, Wilo

AIR CUSHION TANK Supplying & fixing of Air vessel of 450 mm dia x 2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top and drain valve of 25 mm dia on bottom for manually release. Make: MS Fabricated including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

450MM x 2 MTR LONG

250MM x 1.2 MTR LONG

Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. The panel will have separate compartments for bus bar and cable alleys.The following components and accessories will be mounted within each control panel. Make: Fabricated using L&T, Schneider, ABB switchgear including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. The panel will have separate compartments for bus bar and cable alleys.The following components and accessories will be mounted within each control panel. Make: Fabricated using L&T, Schneider, ABB switchgear

TERRACE PUMPSET Supply,Installation and Commissioning of Terrace Pumpsets duly coupled type bronze impeller and SS shaft on MS Channel on concrete base with discharge of 450 LPM @ 35 Mtrs Head. Make: Kirloskar, Lubi, Wilo including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

TERRACE PUMP STARTER PANEL Providing fixing and testing and commissioning of DOL Starter panel for terrace pumpsets duly fabricated in powder coated MS Box with MCCB incoming,VoltRmt and AmRmt for auto start through Pressure Switch. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or on cable tray as required at site. Make: KEI, Finolex, Havells including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

120SQMM X 4 CORE FOR INCOMING

50SQMM X 4 CORE

35SQMM X 4 CORE

16SQMM X 4 CORE

1.5SQMM X 2 CORE FLEXIBLE CABLE FOR PRESSURE SWITCHES

4 SQMM X 3 CORE COPPER FOR JOCKEY PUMPSET

PRESSURE SWITCH Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respects for Hydrant, Sprinkler, Standby and Jockey pump including necessary wiring upto control panel & other materials including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.. Make: Danfos or equivalent

Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. (Below 50mm Pipe all Pipes should be threaded type). Make: Jindal (Hisar), Tata, Surya Prakash

200 mm dia

150 mm dia

100 mm dia

80 mm dia

50 mm dia

Providing and fixing of MS Angle on wall with suitable fastner of 12mm thick x 100mm long as required for pipe support. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supply and erection of MS perforated cable tray with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc. complete in all respect. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

MS perforated cable tray size 200mm x 50mm x 50mm (2mm thick)

MS perforated cable tray size 80mm x 50mm x 50mm (2mm thick)

Providing and fixing Pressure Gauge complete as required complete in all respect. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Dial dia mm 100mm calibration 0-16 Kg Make H Guru or equivalent

Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete in all respect. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Zoloto, Leader, Sant

250 mm dia

200 mm dia

150 mm dia

100 mm dia

80 mm dia

50 mm dia

Proving & fixing ISI Marked Dual Type Non-return valves flanged end class PN-1.6 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc complete including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Zoloto, Leader, Sant

150mm dia(Dual Type NRV)

100 mm dia(Dual Type NRV)

Supplying, Installation, Testing and Commissioning of cast iron flanged Y type strainer with stainless steel mesh in PN-1.6 including cost of Nut Bolt , rubber insertion complete in all respects. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Zoloto, Leader, Sant

150 mm dia

100 mm dia

Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. (Below 50mm Pipe all Pipes should be threaded type) Make: Jindal (Hisar), Tata, Surya Prakash

Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe (For External) conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. including cost of excavation and refilling complete in all resepcts. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Jindal (Hisar), Tata, Surya Prakash

a)150 mm dia

b)100 mm dia

c)80 mm dia

Supplying, Installation, Testing and Commissioning of Stainless Steel following headed hydrant valve with instantaneous SS coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 with blank Cap and chain complete in all respects. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with Stainless Steel male & female couplings (ISI marked) bound & riveted to hose pipes with GI rivets and GI wire as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Supplying, Installation, Testing and Commissioning 63 mm dia Stainless Steel Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Stainless Steel nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Providing and fixing first aid hose reel full swinging type including cabinet with 30 m length x 20 mm dia rubber lined pipe with ABS plastic shut off nozzle of 6 mm dia. The hose reel will conform to IS requirements. Rate will 25 mm dia pipe connection from riser to hose reel including flexible pipe, sockets, nipples, elbows . including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

900 mm x 600 mm x 500mm (For Yard Hydrants)

Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Providing and fixing M.S. fire hose shaft door with frame fabricated from angle iron frame 40 x 40 x 6 mm thick, angle iron shutter 25 x 25 x 4 mm thick, 16 g M.S. sheet of fully welded construction with hinged double front door with locking arrangement and butt hinges, 15 x 3 mm lugs 10 cm long (6 Nos) embedded in cement conc. blocks ( 1: 3: 6 mix) or with rawl plug and screws/bolts and nuts as required, partly glass door 4 mm thick approved by local fire aurthority, painted with one coat of primer, stove enamelled fire red finished, "Fire Hose" written on front, suitable to accommodate 2 Nos single headed Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, 1 fire-man's axe, including suitably mounted on a raised masonry platform as required. (Approx.size 0.9m x 2.1m) including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Stainless Steel seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Zoloto, Leader, Sant

Providing and fixing fire brigade inlet connection of cast iron body with Stainless Steel 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Four Way inlet connection

Two Way Inlet

Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top . including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Providing and fixing of drawl out connection for drawl of water including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

Providing and fixing Pressure Gauge complete as required complete in all respect. Dial dia 100 mm calibration 0-16Kg/cm2 including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: H Guru or equivalent

Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. (Below 50mm Pipe all Pipes should be threaded type) Make: Jindal (Hirar), Tata, Surya Prakash

Providing & Fixing of installation control valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve as per manufacturer's specifications complete. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

150mm dia

Providing,fixing and Testing of UL Listed quartzoid bulb type Sprinklers head to operate at 68 degree Centigrade. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Make: Omex, Tyco, HD

Upright Type Sprinklers

Pendent Type Sprinklers

Sidewall Type Sprinklers

Providing,fixing and Testing of UL Listed Stainless Steel flexibles for ceiling area for sprinklers including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

1500 mm Long

1200 mm Long

1000mm Long

Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top .including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Electrically Operated Flow Indicating Switches ( vane type) including tamper switch and accessories, with potential free contact with 2 Nos. NONC. Complete.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

For 150 mm dia

For 100 mm dia

For 80 mm dia

ANNUCIATOR PANEL 16 (12 working + 4 spare for future) zones annunciater Panel for flow control switches, providing Audio/Visual Indication of actuation of Automatic Sprinkler system / fault hooter etc., for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system. Make: including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Agni or equivalent

Providing and fixing 25 mm dia inspecting & testing assembly with gunmetal sight glass & connected to drain line. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

ABC STORED PRESSURE FIRE EXTINGUISHER Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni 6kg Capacity

Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. in all respect. Make: Omex, Safex, Agni 4.5kg Capacity

CO2 Type Fire Extinguisher 22.5 Kg Capacity ISI Mark IS 16018 fitted with 5 Mtr. Hose Horn & Trolley Handle Complete in all respect including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.. Make: Omex, Safex, Agni

Providing & fixing of set of GI fire buckets set of four nos. each of 9 lt capacity including providing MS angle stand with hooks for holding buckets, painting with red paint & sign written "FIRE" on each bucket & filling of sand in two buckets of each set. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge. Make: Omex, Safex, Agni

VRF/VRV AC SYSTEM Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

14.0 HP HEAT PUMP

16.0 HP HEAT PUMP

18.0 HP HEAT PUMP

20.0 HP HEAT PUMP

22.0 HP HEAT PUMP

24.0 HP HEAT PUMP

Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower ,multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drainpan, other necessary supports etc., suitable for operation on single phase AC supply 230V±10%,50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

1.3 TR Ductable unit

2.6 TR Ductable unit

4.0 TR Ductable unit

5.5 TR Ductable unit

8.0 TR Ductable unit

6.3 TR Ductable unit TFA

4.35 TR Ductable unit TFA

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

1.2 TR Cassette unit with drain pump

2.0 TR Cassette unit with drain pump

3.2 TR Cassette unit with drain pump

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%,50Hz ,single phase AC supply, complete as required. The unit shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

1.3 TR Hi-Wall unit with drain pump

2.0 TR Hi-Wall unit with drain pump

Supply, Installation, Testing and commissioning of factory built Ceiling/floor mounted DX double skin type horizontal air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, and internal gasket between the skins to interrupt the thermal bridge of the panel. AHU shall be complete in all respect dampers etc.Blower section with AMCA certified DIDW fan for ceiling suspended unit with highly efficient IE3 TEFC Squirrel cage motor drive suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply and variable frequency drive (VFD) as required.Cooling coil section with Dx cooling coil with aluminium finned copper tubes (Thickness not less than 0.4mm) & puf insulated 18G stanless steel drain pan with drain connections and AHU kit (priced separately).Filter section with 50mm thick metal viscus/washable synthetic type air prefilters having efficiency 90% down to 10 micron.Necessary vibration isolation arrangement, canvas connection etc., complete as per specifications and drawing of followings capacities.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

AHU: 28000 CFM (76 TR) 4 Row Deep Coil at 60 mm static pressure.

AHU: 20000 CFM (55 TR) 4 Row Deep Coil at 60 mm static pressure.

AHU: 11000 CFM (36 TR) 4 Row Deep Coil at 60 mm static pressure.

AHU: 7000 CFM (15 TR) 4 Row Deep Coil at 60 mm static pressure.

AHU: 8000 CFM (17 TR) 4 Row Deep Coil at 60 mm static pressure.

AIR HANDLING UNIT KIT: Supply, installing, testing and commissioning of Electronic expansion valve & control kit compatible to connect the following Dx type AHU with the VRF outdoor unit, the AHU kit should be complete with Control box for flow of refrigerant so as to modulate the capacity of AHU as and when required in sync with VRF outdoor unit, the AHU kit should have corded remote control, and capability to control the AHU fan , speed of AHU Fan.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Suitable for AHU :20000-24000cfm ahu 15hp)

Suitable for AHU :7000-11000cfm ahu 10hp)

Supply Installation, testing, commissioning of supply & return Y-joints sets of required size for refrigerant piping as per manufacturer standards.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Y- Joints set

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately).including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Dia 6.4 mm OD 13mm thick insulation

Dia 9.5 mm OD 13mm thick insulation

Dia 12.7 mm OD 13mm thick insulation

Dia 15.9 mm OD 13mm thick insulation

Dia 19.1 mm OD 19mm thick insulation

Dia 22.2 mm OD 19mm thick insulation

Dia 25.2 mm OD 19mm thick insulation

Dia 28.6 mm OD 19mm thick insulation

Dia 31.8 mm OD 19mm thick insulation

Dia 34.9 mm OD 19mm thick insulation

Dia 38.1 mm OD 19mm thick insulation

Dia 41.3 mm OD 19mm thick insulation

Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation, fittings, supports, valves as per specifications & drawings.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

25 mm dia

32 mm dia

40 mm dia

Air Cooled Inverter type Split AC SITC of inverter type Split Cooling units as per specifications and complete as required. Outdoor units shall be with rotary/scroll compressor air-cooled condenser coil with fan, casing, MS-stand, cabling and earthing as required. Indoor units shall consist of centrifugal fan with motor, dx-cooling coil of copper tubes and aluminium fins, casing, filter, full charge of gas and oil, control wiring, interconnecting refrigerant piping between indoor and outdoor unit, cooling thermostate control wiring,Note : Aluminium Fins and copper tubes of Air Cooled Condenser along with copper tubing / piping with all joints and U-Bends exposed to coastal areas corrosive atmosphere / aggressive ambient, shall be painted with special corrosion prevention coating either in factory or at site.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

1.5 TR Hi-wall Unit

2.0 TR Hi-wall Unit

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Thickness 0.63 mm sheet (24 G)

Thickness 0.80 mm sheet (22 G)

Thickness 1.00 mm sheet (20 G)

Thickness 1.25 mm sheet (18 G)

Supplying, fixing. testing commissioningof GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications complete as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying & fixing of powder coated extruded aluminium Return Air Grills without volume control dampers complete as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supply and fixing of Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mm including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

MECHANICAL VENTILATION FANS AXIALS FANS SITC of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled TEFC to Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. The complete fan assembly shall be BSEN-1210-3-2002/UL listed for 250 Deg C 2 hours in accordence with power ventilator for smoke control systems and as per specification complete as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Air Qty. = 6000 CFM ( Lift+Laundry) Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 6500 CFM Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 7500 CFM Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 16500 CFM Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 31000 CFM Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 40500 CFM (Parking) Static Pressure = 30mm Wg Fan Speed = Not exceeding 950 rpm

INLINE FANS Supply, Installation, Testing and commissioning of Fresh/exhaust air fan suitable for Inline mounting comprising of forward curved centrifugal blower complete with induction motor, metal clad MCB, canvas connection all compete as required. Motor shall be suitable for single phase, 230 volts, 50Hz AC. supply as per specifications of following capacities: Noiselevel should not exceed 65dB(A)at 3 Rmt in room condition.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

100 cfm capacity with10 mm static pressure

300 cfm capacity with10 mm static pressure

700 cfm capacity with10 mm static pressure

1500 cfm capacity with10 mm static pressure

PROPELLER FANS Supply, Installation, Testing and commissioning of wall mounted propeller type exhaust fans of Axial Flow type with light weight type PVC / aluminium impellers with aerofoil contours for high efficiency and low noise. The fan shall be supplied complete with and gravity louvers with a suitable Squirrel cage induction motor.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

225 mm dia

300 mm dia

AIRWASHER Supplying, Installing, Testing and Commissioning of CELDEK FILL package type air cooling unit with minimum 90% saturation efficiency. Air cooling unit shall be factory assembled and complete with double skin casing 0.8mm Inner / outer pre-coated GI sheets, DIDW forward curved fans with TEFC, sq. cage, induction motors 1440 RPM (IE-3) with IP-55 Protection. Suitable for operation on 415 ± 10% voltage, 50 Hz 3 phase AC supply, drive package including multi sheave pulleys and belts for fans and motors, 1.2mm thick tank & pad section in SS Construction, vibration isolators, wire mesh pre-filters, 200 mm thick CELDEK FILL, Water Circulation Pump (1W+1S), internal PVC piping, valves and fittings, 4-bend PVC eliminator. The Unit shall be following capacities complete as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

22500 cfm WITH capacity with 40 mm static pressure

5000 cfm WITH capacity with 40 mm static pressure

DRY SCRUBBER Supply, Installation, Testing and Commissioning of dry type Ceiling/Floor mounted Scrubber comprising electrostatic section multi cell type with 16 G powder coated galvanised steel sheet housing of 16 G (1.4 mm) thick system, bottom drain and metallic mesh filter. The electronic air cleaner shall be the two- stage dual voltage plate type cells and efficiency of 90% as per ASHRAE test Standard for dry particulate. Ionizing- collecting cell of one-piece construction. Power supply shall be 100% solid state. on 200 to 240 VAC, 50HZ, 1Phase input with an LED light indicating the performance status as per specification etc complete as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SISW KITCHEN EXHAUST FAN FOR SCRUBBER Supply, installation, testing and commissioning of Suitable SISW Backward Curved Kitchen Exhaust Air Fan in double skin construction complete with TEFC Induction Motor, Drive Assembly, Base Frame, Vibration Isolators and other accessories etc as per specification complete as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Capacity - 24000 CFM

Capacity - 5500 CFM

Supplying, installing and testing of extruded aluminium Fresh Air intake louvers with bird screen in accordance with approved shop drawings and specifications complete as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

150 mm dia.

SITC Constant Volume Flow Limiters,should be Mechanically System Powered with High-quality plastic control damper and casing stainless steel leaf spring & silicon free oscillation damper ,It should be Factory Calibrated and can be Adjusted at Site with Independent of orientalion in installation.Contorl range should be ± 10 % of Set Flow. complete as per specifications. etc complete as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Design, fabrication, supply, installation, testing and commissioning of panels fabricated out of 2mm thick for structural members and 1.6mm thick for door and covers CRCA sheet in cubicle compartmentalize free standing floor mounted/ wall mounted powder coated with reinforcement wherever necessary. Cable gland plates shall be provided on top and bottom. Panels have 2 Nos. earthing terminals. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system lifting hooks shall also be provided in case of large panels. Degree of ingress protection shall be IP42.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed Aluminium conductor armoured cables including , clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning etc as per specification complete as required. including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

4C x 6 Sq.mm.

4C x 10 Sq.mm.

4C x 16 Sq.mm.

4C x 25 Sq.mm.

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge The tray shall be as follows :-

100 x 50 mm x 1.6mm thick

150 x 50 mm x 1.6mm thick

225 x 50 mm x 1.6mm thick

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

25 mm dia. ISI marked, steel conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

25 mm dia. ISI marked, PVC conduit

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

2x 1.5Sq mm

4x 2.5sq.mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing aling with existing surface/recessed conduit/submain wiring/cable as required.including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Design, Engineering, Supply, Transportation, Installation, Testing & Commissioning of 124kWp Solar PV Plant, Equipment with PV Panels Complete of make GES Green Energy Solution or equivalent complete at Site of Work including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of composting machine of organic waste system of 50KG per day, Machine Size (L x W x H) in Rmt : 2.35 x 0.93 x 1.68, Power : 8 HP, Waste Treatment Capacity : Up to 50 kg/day, All Wetted Parts : Stainless Steel SS 304, Operation : Fully Automatic., Volume Reduction : Up to 80-90%., Shredder : Built-in, Power requirement Three phase 415 V, 63 A connections with earthing and neutral, as per technical specification including civil works of required shed and foundation base (Smartenviro/Excel/Tanco or equivalent or including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

Consort Builders Pvt. Ltd.

A S ENTERPRISE

BANSAL AND BROTHERS JV

UNIPRO