Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.4 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹29.6 L+₹19,760 (0.67%)Rejected-AOC | 2 | Rejected-AOC L2 BIDDER | |
| 3 | 3₹33.2 L+₹3.7 L (12.7%)Rejected-AOC | 3 | Rejected-AOC L3 BIDDER | |
| 4 | 4₹40.6 L+₹11.1 L (37.9%)Rejected-AOC | 4 | Rejected-AOC L4 BIDDER |
Tender Value
₹45.8 L
EMD Value
₹91,700
Closing Date
13 Feb 2024, 5:00 pmClosed
GENERAL MANAGER
AMMUNITION FACTORY KHADKI
Replacement of the overhead water tanks and WPT of Type IV and F Type qtrs. at AFK
2024_MIL_182844_1
GM/AFK/EO/DC/1005/2023-24
Open Tender
Civil Works
Item Rate
180 days
RANGE HILLS ESTATE
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹91,700
16 Jul 2024
24 Jan 2024
15 Feb 2024
24 Jan 2024
13 Feb 2024
24 Jan 2024
Amount
Stripping out taking down existing water proofing treatment from roof slab and parapet walls. Cement plaster including hacking for key, raking our joints and scrubbing down with water etc to receive plaster.
Demolition of cement concrete (reinforced) of any description and in any position not othrtwise speciaally provided (roof rcc water tank)
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.
M&L providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:4, complete
M&L for 100 mm thick cement concrete type B0 1:2:4 (12.5 mm aggregate ) and cement concret surface even and smooth using extra cement
Supplying only liquid water proofing compound
M&L for screed bed or bedding layer of mortar 25 mm thick for laying floor finishes in CM 1:3
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including sand faced finish to plastering as specified.
Dismantling water tank of capacity exc 250 but n exc 500 lts and removing to store.
M&L for providing WPT by using membrane over roof & vertical surface, consisting of applying oil bonded bituminous primer coat at 0.30 kg/m2 on a clean & dry surface & then providing a layer of APP modified membrane 3mm thick weighing approx. 4 kg /m2with non woven polyester reinforcement with very thin polyethylene film on both side with thermofusion process by gas regulated torch & finally applying one coat of super silver sheld aluminium based bituminous paint all as per specification & as directed by E-in-C. Make :- IWL/TIKITAR/STP
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 20 mm
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 15 mm
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 25 /32mm
S&F f of GI tube 20 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL .
S&F f of GI tube 15 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL .
S&F f of GI tube 25 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL .
S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part I, capacity of tank 500 lts. MAKE SINTEX/PLASTO/SHEETAL
S&F stop valves cast copper alloy, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed in repairs bore dia of pipe 20mm.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed bore of pipe 20mm. (Minimum weight 15mm-142gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms)
Cutting existing steel tubing for altration or addition for bore pipe 20 mm dia as per direction of E-I-C
Cutting holes into or through stone walls built in cement mortar and making good in cement mortar or cement concrete 1:2:4 Type B-1 as required for superficial area of hole exc 150 sq cm but n Exc. 400 sq cm.
Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed. Soil ,rock, P.C.C.
GREENSTONE CONSTRUCTION
UNICON
M/S Hrushikesh A. Patil
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .