MAINT OF BR ASSEST INCL ROOF TREATMENT, PLUMBING, PLASTERING, JOINERY IN CERTAIN OTM ACCN, ASCON NODES INCLUDING RAMGARH AT MIL STN JAISALMER

Amount

S&F in repair bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia fixed in repairs. (make: Hindware Cat part no F330041, Prayag Cat part No 8306, Cera Cat part No F3001151)

S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed fixed in repairs.(Prayag Cat Part No.- 8304, Cera Cat Part no. -F 2006101, Hindware Cat Part No. -F 33002,Silver shine model no:-1065)

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).

S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs.

S&F in repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete fixed in repairs.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down of old unserviceable water storage tank all as directed by Engg-in-Charge

S&F in repair 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down of old unserviceable water storage tank all as directed by Engg-in-Charge

S&F in repair PVC down take waste water pipe for WHB of size 32 mm dia and 60 cm long fixed in repairs

S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed in repairs

S&F in repair CP grating(with & without hole) for Nahani trap and floor trap of size 100 mm dia fixed in repairs

S&F in repair Swivel shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs.

S&F in repair PVC ball valve 15 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed in repairs.

S&F in repair PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed in repairs.

S & F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover

S & F in repair Vitreous china wash down one piece water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fittings fixed in repairs

S & F in repair CP brass Towel rail 20mm dia, D type, 60 cm long complete fixed in wall with screws in repairs

S&F stainless steel soap dish fixed complete in repairs

S&F in repair Glass self fixed complete all as specified

S&F in repair stainless steel Toilet paper holder with cutting edge cover in repairs

S&F in repair chromium plated Angle valve 15mm

S&F in repairs PVC cover for PVC rotational moulded water tank upto 500 & 1000 ltrs capacity white colour

S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete

S&F in repair Bath cabinet, PVC make Prayag or equivalent approximate size 400x300x100 or 120mm with mirror on face.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S&F in repairs Brass CP ball mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore

S&F in repair CP wash basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia

S&F in repair two way angle valve for fixing in 15mm dia bore all as specified and directed

S&F in repair two way 15 mm dia bib tap all as specified and directed

S&F in repair Health Faucet for EWC all as specified and directed

S&F in repair Jet spray for EWC all as specified and directed

S&F in repair waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 32mm dia complete all as specified

S&F in repair waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 40mm dia complete all as specified

Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-

(a) 15 mm bore

(b) 20 mm bore

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-

(a) 15 mm bore

(b) 20 mm bore

Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-

(a) 15 mm bore

(b) 20 mm bore

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair 75 mm bore PVC (SWR) bends/shoes any radius complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed ceramic tiles light shade in vertical surface 450X300X7mm thick,jointless tile set and jointed in neat cement slurry and pointed in white or coloured cement, set in 10mm thick backing coat in CM 1:4

M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

S&F in repairs Vitreous china urinals with urinal spreader, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing

S&F in repair 15mm fancy type, chromium plated with long shank and cup (concealed typeStop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S&F in repair stainless steel plate rack of size 910mm X 790mm X250mm complete all as specified & directed by Engr-in-Charge.

Disconnecting existing tanks exc 250 and n.exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).

All as per item No. 50.00 above but exc 500 and n.exc 1000 litres

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc capacity exc 250 and n.exc 500 litres all as directed by Engr-in-Charge

All as per item No. 52.00 above but exc 500 and n.exc 1000 litres

S&F in repair of GI elbow, tee, nipple, socket of 15mm complete all as specified and directed by Engr-in-charge.

S&F in repair of GI elbow, tee, nipple, socket of 20 mm complete all as specified and directed by Engr-in-charge.

S&F in repair PVC down take waste water pipe for urinals of size 32 mm dia and 100 cm long fixed in repairs

S&F in repair syphonic flushing cistern kit for one piece EWC flushing cistern all as specified and directed by Engineer in Charge.

Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and as directed.

M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement.

M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in cement morter 1:3on ceiling, finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering

M&L preparation of new plastered surfaces of ceiling any description and applying three coats of white wash

Taking down shutters of any description not exc 1 Sqm each all as specified and as directed

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed

All as per item No 67 above but exc 1.5 sqm and n exc 4 sqm each

S & F factory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat all as specified and as directed.

S & F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats second class hard wood 35mm thick for door shutter all as specified and directed

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in SSR 2010.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing.

S & F aluminium anodized tower bolt 150mm size complete all as specified and directed.

S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed

S & F aluminium handle 125 mm cast type anodized

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S & F steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay ,complete with glazing bars ,devetailed or welded

S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

S&F Galvanized mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples fixed

M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge

S&F aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed approved by Engr-in-Charge

S & F in repair anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs Floor door stopper of aluminium alloy body 140mm long Complete all as Specified.

S&F in repair aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified.

S&F in repair aluminum handles cast type, anodised, 150mm size Complete all as Specified & directed.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples Complete all as Specified & directed.

Dismantling boarding, any description, fixed in any position with nails

M&L Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified

S&F of 12 mm medium density fibre board, exterior grade, fixed to timber framework with screws

S&F in repair male thread connector, Elbow, Female tee, S.T.Coupler (outside dia 16mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite complete all as specified and directed by Engr-in-charge.

S&F in repair male thread connector, Elbow, Female tee, S.T. Coupler (outside dia 20mm) polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe including all crimp type internal sealing plastic metal composite complete all as specified and directed by Engr-in-charge.

AMBEY MAA CONSTRUCTION COMPANY

Leelashah Enterprises

M/S VISHNOI ENTERPRISES

BHAGWATI CONSTRUCTION

S K TRADER

GEMRARAMCONTRACTOR

M/s Shri Inder Construction Company