PROVN OF SEPTIC TANK AND SOAKAGE WELL FOR FORTY USERS AT MOD FD VET HOSP, SPL REPAIR TO INTERNAL ROADS OF 19 INF DOU,SPL REP TO BLDG NO T-14 AT ASC BN AND SPL REP TO TOILET BLOCK OF 19 INF DOU AT PATTAN UNDER GE 969 EWS

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 600x 300x 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and laid over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 graded crushed stone aggregate) as in floors finished even and fair complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors set and jointed over cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and as directed.

S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed

S&F 2nd class Hard wood 35mm thick panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 100 mm long complete all as specified.

S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed.

S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed 200 mm long complete all as specified and as directed.

S&F mild steel pressed handles, oval type ISI marked stove enamelled black 150mm size complete all as specified and as directed.

S&F 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F for in repairs S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets complete all as specified. Note : Pillar tap and PVC connection will be measured paid separetly.

S&F Angle valve cast copper alloy screwed down high pressure with Capston Head handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions and fixed in repair, complete all as specified and directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, ceilings or in floors.

S&F 25mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, ceilings or in floors.

Taking down cement plaster on brick work or stone walls, etc. Including raking out joints, hacking for key, srubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and as directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of cement base paint on wall surfaces complete all as specified and directed.

M&L complete removal of existing treatment (external) on walls by scrapping with steel wire brushing, scraping down smoke soot/ plants roof from wall/chhajjas and applying two coat of cement based paint on walls including preparation of old plastered or un plastered surface comlete all as speified and directed.

S&F for in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed.

S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified.

S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and as directed.

LLDPE septic tank designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc,complete all specified for 20 users complete all as specified and and as per manufacturer instructions and as directed .

M&L soakage well 2.40m dia and 3.00 m depth excavation in any type of soil, foundationin PCC 1:3:6, wall of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screed chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC. Complete fillled with brick bats. Complete all as specified and as directed.DRAWING NO: ED-3071 Note: (i) Incl excavation, returning filling and removal of earth work.

Excavation in trenches not exc 1.5m wide and not exc 1.5 mtr deep for sewage pipe line and manhole etc and getting out in any type soil complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate)as in foundation and mass concrete. Complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6. Complete all as specified and as directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping incl necessary formwork, weathering, slightly rounded or chamfered angles including demoltion complete all as specified and as directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars. Complete all as specified and as directed.

Cement Concrete 1:3:6 type C2 Concrete bed to drain pipes 150 MM bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

M&L for rendering 15 mm thick in CM 1:4 on Brick/ concrete surfeses using waterproofing compound and is to be finished even & smooth without using extra cement.Complete all as specified and as directed. (Note:WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using (40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cms inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and ncluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole covers including necessary formwork required including setting in cement mortar (1:4), complete, all as specified and as directed.

M&L for scarifying or picking gravelled, macadam or bitumenous macadum surfaces in area exc 400 sqm N exc 50mm deep complete all as specified.

Roling and consolidation formation in cutting with power roller using 8 to 12 tonne complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for 150 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring/hardstanding and finised even and fair w/o using extra cement incl mixing of liquid floor hardner complete all as specified and as directed. Note :- Floor hardner measured & paid seperately as per manufacturer Instruction.

Formwork to edges of concrete flats, treads, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and as directed.

Supply only liquid metalic floor hardner

Forming contraction dummy joint of 65 mm deep x 10mm wide filled with sealing compound of grade 'A' complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and as directed.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats. Complete all as specified and as directed.

S&F 2nd class 30mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats size of members of shutters as specified in SSR Part-I Section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified.

MS Cold rolled Butt hinges medium weight 75 mm long complete all as specified.

S&F 300mm long Aluminium alloy, anosided, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 200mm long Anodised Aluminium tower bolt all as specified.

S&F 100mm long Anodised Aluminium tower bolt all as specified.

S&F 150mm long extruded aluminium alloy handle.

S&F 100mm long extruded aluminium alloy handle.

S&F galvanised mild steel wire cloth 0.46mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks ro galvanised wire stapple.

S&F Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5sqm in each pane 3mm thick complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden or wood based surfaces over 10cm width or girth etc complete all as specified and as directed.

S&F Aluminium hat & coat hooks, solid body, 175mm to 250mm.

S&F in repair curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. Complete all as specified and as directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc) and boarding any thickness, including cover fillets complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section unframed work.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but not exc 25 sqcm in section.

M&L of 9 mm thick Plywood,grade BWR, type BB, fixed with screws to timber frame work, fixed with screws to timber frame work complete all as specified and as directed.

S&F decorative type wooden panels 10mm thick and size 300x300 mm panels in ceiling fixed to plywood with nails and polished with warnish complete all as specified and as directed.

S&F 2nd class soft wood 12mm thick and 100mm wide plain one side with edges tounged and groove joint as in wall panelling complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.

0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugationi side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120 grams per square metre complete all as specified.

0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 120 grams per square metre complete all as specified.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregrate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

M&L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PCV sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F in repair Vitreous China wash down water closet (one piece) including cistern with lid dual flush fitting with seat cover size not less than 665x360x765mm (white) including fixing bolt complete all as specfied and as directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75mm bore pipe.

All as per above item No. 83 But 110mm bore of pipe

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with Collars complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1.3.6 type C-2 using (40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 100 mm dia complete all as specified and as directed.

S&F for PVC (SWR) bend with access. door inluding jointing with solvent cement 75 mm bore complete all as specified and as directed.

All as per above item No. 87 But 110mm bore.

S&F vitreous China wash basin, white, oval shape size size 550 x 400 mm including, waste fitting chromium plated brass and rubber plug, procelain stopper, a pair of CI brackets waste pipe and waste cupling of 32 mm dia of PTMI (half or full threaded) (min wt 45 grms) etc complete all as specified and as directed.

Brass CP central hole mixer for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified and as directed.

M&L 20 mm thick granite polished in wash basin counter and fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.Complete all as specified.

S&F Chromium Plated fancy type three way wall mixer including hand shower for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified.

S&F in repairs CP health fawset hand held triggered nozle and delivers a sprey of water with pipe complete all as specified and as directed.

S&F PVC connection 15 mm size, length 450 mm, with PTMT nuts, complete all as specified and as directed.

S&F 15mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs With chromium plated brass screws complete all as specified and as directed.

Brass chromium plated shower rose 125mm size complete all as specified and as directed.

M&L for Gl tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore complete all as specified and as directed.

S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm- 210g m s /25mm-455gms/ 40mm 690 gms) complete all as specified and directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified ad as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for prepration of new surfaces of walls and applying two cotas of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint, white or tinted, complete all as specified and as directed.

M&L for Compound girders and stanchions, lattice girders, aerial masts, staging of water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc

M&L for Plates (plain or chequered) M&L for channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and as directed.

M&L for preparation of new previously untreated steel surface of any description (new galvanized steel surfaces) over 10 cmm in width or girth not otherwise described to receive painting, by coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board with accessories

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F switch piano Flush type, single pole15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universal with gang box complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S & F in repairs MCB TPN 63 amp rating 415V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S & F in repairs MCB TPN 40 amp rating 415V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S & F in repairs MCB SPN 40 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix LED Lamp 10W.

S & F wall mounted LED fitting 1x 20w, 220v , AC , Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repair recess mounted ceilinglight round/square slim, compact, aluminum die cast edge lit panel with opal difuser and seprate electronic driver 15 W LED 3000K suitable for fixing in the false ceiling complete all as specified.

S&F in repair 2 feet x 2 feet, 40 Watt warm/white LED (LxWxH) 595x595x70 recess mounted ceiling light (Octane+LED Panel square) square slim, compact aluminum die cast edge lit panel with opal diffuser and separate electronic driver suitable for fixing in the false ceiling complete all as specified and as directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper wire of suitable size,complete all as specified and as directed.

S&F Ceiling Fans Complete With Blades , Down Rods, Electronic Regulator And Accessories 230 V 1200mm Sweep Complete all as Specified and as directed. Note : Old Unsv ceiling fan deposited in MES store.

Supply and fix, install and testing ISI marked, metalic body, energy efficient, water heater storage type, copper tank, electrically operated, single phase, 50 Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 450mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and as directed.Old geyser shall be deposited to MES store yard.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm main wire and one run of 4 sqmm earth wire and one run of casing capping shall be measured as one RM

Material and labour for XLPE insulated, armoured , PVC sheathed, heavy duty electric cables with stranded aluminium conductor, conforming to IS : 7098 laid in trenches/ducts/ fixed to wall/pole 1100 volts grade of cross sectional area 35 sq. mm 3.5 core with necessary fitting such as thimbles etc including taking out old userviceable cables/ service wire from any space all as specified.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed.

Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

M&L GI Pipe , 'light grade', 40 mm bore for cable protection as a guard pipe complete all as specified and as directed.

Note:- Schedule of credit Rs. 44,046.16 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Javeed And Co

M/S BILAL CONSTRUCTION AND CO

M/S MANZOOR AHMAD YATOO

M/S ESS EMM ENTERPRISES

SOFI CONSTRUCTIONS

M/S JAVID AND CO