SUPPLYING AND LAYING OF DIFFERENT DIA D.I PIPE K-9 FROM WTP BHELATAND TO EXISTING SUMP AT IIT ISM DHANABD

Amount

Earth work in excavation (As per I.S. 3114/1965) for laying of different types and sizes pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial dead and lift as per specification and direction of Engineer - in -charge.

(For classification of soil item- B.)

(For classification of soil item- C.)

Supplying all labours, tools, tackles, lubricant etc. for laying and jointing D.I. K-9/ D.I. K-7 pipe in trenches, supplying rubber gasket (Rubber gasket conforming to ISS 9523) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost) and laying of pipe is to be done as per ISS 3114:1985 as per design specification and direction of E/ I.

Rising Mains - D.I. K-9

Providing and Supplying centrifugally cast(Spun) Ductile iron pressure pipes for Water supply with socket and Spigot ends conforming to IS 8329/2000 in standard lengths of class K-9/K-7 suitable for push on joint (Rubber gasket jointing) with cement morter lining for inside surface and outside Zinc coating with Bituminous paint including all other taxes, insurance, stacking including inspection charges of DGS&D/ SGS and sales tax all complete including carraiage up to 325 Km lead

Rising Mains - D.I. K-9

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer-in-Charge.

Providing, erecting, connecting double flanged short body pattern type manually operated Sluice Valve/Scour valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming to BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding C.C.foundation/ structural steel support conforming to IS 13095-1991,(DI Specials if required will be paid seperately) including laying & jointing etc. all complete. without bypass arrangement and PN-1.6

250mm D. I. SV

600mm D. I. SV

Providing and supplying D.I. specials of class K-12, like branch, bends and tapers for water supply works suitable for push on jointing (Rubber gasket jointing) conforming to IS 9523 with cement morter lining for inside surface and outside Zinc coating with Bituminus Paint including all other taxes, insurance, carriage to work site with loading, unloading etc, stacking including inspection charges of DGS&D/ SGS and sales tax all complete.

Labour charge for one cutting of ductile iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/ I.

Installation of product pipe by Guided Auger Boring method including making of entry and exit pits all related civil works like excavation shoring strutting etc shielded excavation, through auger boring process lowering of pipe segments in the jacking pit laying and joining of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of teh engineering-in-charge all complete exept the cost of the pipe average cover of 1.5 depth below GL (upto 300mm dia Sandy Soil)

Supplying all materials, labours, tools and equipment and constructing RCC chamber of 1.8M.x 1.50M. x 2.60M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I. (As per Analysis )

Supplying tools, labours and cutting road for laying of pipes of different size and restoring the same as per specification and direction of E/I.

a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement and making good the same.

Supplying tools and tackles for testing of laid D.I. pressure pipe up to 60 meter head of water all complete as per specification and direction of engineer-in-charge.

Cost towards construction of Trust Block in Bend, Tee, Reducior etc in M200 Concrete Mixing of (1:1.5 : 3) Including Rainforcement centering & shuttering all complete as per diriction of E/I.

Dismentalling of PCC work including stacking serviceable materials in contable stacks within 15Mtr lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying in position cement concrete of specified grade M200 (1:1.5:3) excluding the cost of centering and shuttering. All work up to plinth level.

Cost towards O&M of 3.6MLD Operational System for 3yr including Pump Motor Pipe Line Esteblisment Etc complete. Excluding Energy Cost with labour component and materials. (As per SBD Section-5 clause-9.10).

Cost towards supplying instolation and commisioning of Adept / Siemens make electro-magnatic water flow meter including neccesary electric wire complete job.

PUMP HOUSE

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M- Including all lifts, leveling ramming the foundation trenches, removing roots of trees, shards all complete as per approved design, building specification and direction of E/I

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, Labour, royalty and taxes all complete as per building specification and direction of E/I (mode of measurement competed volume)-

Providing designation 75Aone brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I

Providing R-C –C-M 200 in nominal mix of (1:1:5:3) in foundation with approved quailiy of stone chips 20 mm size graded and clean coarse sand of FM 2.5 to 3 uncluding screening mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per buklding specification and direction Engineer incharge

Providing designation 75 A brick work in C-M- (1:6) in foundation and plinth with approved quality of clean coarse sand of F-M- 2 to 2-5 including providing 10mm think mortar joints, cost of screening materials, raking out joints of 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I

Providing designation 75 A Brick work in C-M- (1:6) in superstructure with approved quality of clean coarse sand of F-M- 2- To 2-5 including providing 10 mm thick mortar joints, costs of screening- Materials, scaffolding, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm, cement plaster (1:4) with clean coarse sand of F-M 1-5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction E/I

Providing 6mm, cement plaster (1:4) with clean coarse sand of F-M 1-5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction E/I

Providing tow coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including prePering plastered surface by rubbing smooth with pumice stone or line sand paper, applying putty wherever required, scaffolding washing for floor and taxes all complete as per building specification and direction of E/I

Providing and applying plaster of putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing one coat of synthetic enamel paint of approved shade and kames over steel surface including cleaning the surface toughly, scaffolding and taxes all complete as per building specification and direction of E/I

Supplying fitting and fixing collapsible gate of approved sizes and make properly fib raced with vertical double channel 20x10x2mm at 100mm- centers and braced with ms flat diagonals 20x3mm, with top and bottom rails of tairon 40x40x6mm with 38mm dia steel pulley complete with bolts, nuts, looking arrangements, stoppers, handles, including applying a priming coat of red lead paints, car ridge, hoisting and taxes all complete as per building specification and direction E/I

Structural Steel work in single section(RS Joist) fixing with or without connecting plate including cutting hosting fixing in position applying in primary coat of approved steel primer all complete.

Labour for hoisting, placing and fixing in position R-S- joist or tee including cutting to required shape and size straightening all complete job (but excluding the cost of joist or Tee) as direction of E/I

Centering & shuttering including roof,clumn foundation taxes all complete as per building specification and direction E/I

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50m and lift of 4-5m all complete as per building specification and direction of E/I

Carriage of Materials

Cement+Steel - 20 km

Sand - 20 Km

Brick - 20 Km

Stone Chips - 20 Km

MECHANICAL PART

Cost towards Supplying, Installation, testing and commissioning of electrically driven Horizontal Split Casing Centrifugal pump having discharge capacity of 300 m3/h against a total head of 50 mtr in all concern make (Kirloskar/ WPIL/ Mather & Plate/ Jyoti ) coupled with TEFC sq. cage induction motor make (Kirloskar/ Crompton/ Jyoti/ ABB) operated on 415 + 10% volts, 50Hz, 1450 - 1500 RPM mounted on common M.S. fabricated base plate with suitable size of CIDF sluice valve-1 no, CIDF NR valve-1 no, foot valve-1 no, pressure gauge-1 no, and suitable size of tyre coupling-1 no etc all complete.

Supplying all labour tools and tackles for making PCC foundtiaon of size 6′x4'X6′ with all materials such as cement , sand, stone chips, foundation bolt-6nos etc all complete and plastering and punning over exposed surface.

Cost towards supplying and laying of suction pipe line with supply and fitting of 8" dia M.S. heavy duty pipe 20ft, bend-2nos, flange-4nos, rubber insertion-10kg, nut+bolt-10kg, cutting of pipe in required length and doing complete welding etc all complete at site.

Cost towards cutting of RCC wall of sump and making hole for laying of suction pipe line

Cost for laying of delivery line with common header with supply and fitting of 8" dia M.S. pipe heavy duty 6 mtr, 8" dia blank flange-2no, 6" dia M.S. pipe 9mtr , flange-12nos, bend-3nos, Tee-1no, rubber- insertion-20kg, nut+bolt-30kg cutting of pipe in required length and doing complete welding etc all complete for both sets.

Cost for providing priming arrangement with supply and fitting of 2000 liter UPVC tank-1no, 2" UPVC pipe-50ft, bend-4nos, tee-1no, socket-6nos, long threade nipple-2nos, 2" dia brass gate/ ball valve-3nos with making hole in UPVC tank-2nos with all labour tools and tackles.

Cost towards supplying and laying of 35 mm2 X , 3 core PVC insulated and PVC sheathed ,1.1 KV grade unarmored copper cable. Make – Polycab/ KEI/ Universal/ISI marked reputed make. (From Starter to each 2Nos.motor)

Cost towards making cable mouth for- 35 mm2 X , 3 core PVC insulated and PVC sheathed ,1.1 KV grade unarmored copper cable

Cost towards Supplying and laying of 300 sq. mm x 3.5 core PVC sheathed & PVC insulated, 1.1 KV grade aluminum armored cable. Make – Polycab/ KEI/ Universal/ISI marked reputed make. (From Transformer to Motor Control Panel)

Cost towards making cable mouth for- 300 mm2 x 3.5 core PVC sheathed & PVC insulated, 1.1 KV grade aluminum unarmored cable

SITC of 315 KVA (with off load tap changer) outdoor type copper wound transformer continoulsy rated for 3phase, 50hz, at full load and temp rise not exceeding 45 degree C by thermomter in oil and 50 degree C by the resisitance in winding after continous run at full load rating the transformer should have oil immersed winging havaing vector group DY11, HT side connected in delta and LT side connected in star with neutral brought out connected to provide seperate earthing. The Trnasformer shall have poer terminal arrangement bushing/cable end box on HT side and cable end box on LD side-2nos, channels with stoppers shall be provided and fixed on the provided plinth for monting the trasformer . The transformer should have following standards as per amended IS specification and the load & No load losses shall be limited to the values given below or as per IS 2026 or Norms issued by SEB which ever are lower- 1- Oil conervator with filling hole iwht cap and plain oil level gauge 2- Silica gel dehydrating breather charged with silica gel 3- Oil drain valve 4- Oil Filter valve 5- Lifting eyes/hooks 6- Two earthing terminals 7- Diagram and rating plate 8- Air vent 9- Expolsion vent 10- 100mm dia thermo meter with thermometer pocket 11- Four bi directional plain roller [Make: Servokon/Kirloskar/Crompton/Synergy] JSOR 2013-14 / 118/D/TR 1.6

Cost towards making D.P. Structure with supply and fitting of Railpole / RCC Pole-9mtrs long-2Nos., supporting bracket, G.I. Channel for mounting Horn gap fuse, and AB Switch, nut bolt as required size,11KV Horn gap fuse-3Set,11KV A.B. Switch with handle all complete-1Set, 11KV Lightening arrester-1Set and making all line connections etc all complete with materials, labour , tools , tackles and technician cost etc all complete.

Cost for supply and filling of transformer oil of recommended quality ISI mark suitable for 315 KVA transformer.

Cost towards Supply and Fitting of Outdoor Termination kit for above 3 C x 300 Sq. mm Aluminium Armoured cable, XLPE/ PVC insulated & PVC sheathed, 11000 V grade with heat, shrinking and making proper jointing of termination kit including all labour, tools, tackles and technician charges.

Cost towards supply and laying of 3 core x 300 Sq. mm Aluminium Armoured cable, XLPE/ PVC insulated & PVC sheathed, 11000V grade, ISI Marked, Make.Havells/Polycab /Finolex/ Gemscab/ Any reputed make.

Cost for making earthing point with chemical earthing materials etc and doing all earthing connection.

Cost towards making PCC plinth for Transforme, size 6' x 6' x 8' with required material such as cement, send, stone chips etc and proper curing.

Cost towards supply and fitting of 630Amp switch disconnector with bracket and fitting on wall and making all line connection

Cost of doing internal electric wiring with s/f of 3/20 single core copper cable with s/f of on-off swicthes, indicator, fuses, sockets, switch board, junction boxes, PVC casing, nails & allied fittings etc including supplying and fixing 40 watt LED tube light-2 Nos,12W LED Bulb-2 Nos with all fittings etc including electrician charges for Raw water pumping plant, Clear water pumping plant pump house no-1&2 and outside of pumphouse etc all complete.

Cost towards supplying and fitting of 3 ton capacity tripple spur gear chain pulley block with 6 mtr lift and operating chain as per is specification.

Cost supplying and fixing of 40 watt LED flood light with bracket with all fittings and accessories etc all complete for Clear water premises. With C.P. & OHC. [Make-Havells/ Syska/ Mescab/ Bajaj/ Any reputed make.]

Labour cess- 1%

Dilip Infracon Private Limited (BID ID -668040)