Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance JOGINDER NAGAR | SHAHID BHAGAT SINGH NAGAR | PUNJAB | 144509 | Admitted-Finance |
| 2 | Admitted-Finance D2 453 A SHIV DURGA VIHAR LAKKARPUR SURAJKUND ROAD SURAJKUND FARIDABAD FARIDABAD FARIDABAD HR 121009 HARYANA 121009 | FARIDABAD | HARYANA | 121009 | Admitted-Finance |
Tender Value
₹42.0 L
EMD Value
₹70,600
Closing Date
16 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer, RDD Zonal Office Dharamshala
Sub-Head - Construction of Cremation Hall and Providing and Fixing LPG Based Cremation System
2024_DRDPR_83592_1
rdddshala1432-37
Open Tender
Civil Works - Others
Item Rate
180 days
Chamunda
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,000
Executive Engineer RDD Zonal Office Dharamshala
₹70,600
23 Jan 2024
6 Jan 2024
18 Jan 2024
6 Jan 2024
16 Jan 2024
6 Jan 2024
Amount
Excavation in foundation, trenches etcetera. in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out wter (Surface and sub soil water) upto any depth/ height or any quantum of water including de-watering, removal of slush, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-Incharge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete work M20 mix design to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millileter) to obtain the minimum compressive strength not less than 330 kg/ cum with mechanically mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of colums, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength 20N/mm2 (20 newton per square millimeter) and minimum cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) and minimum cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in coulmn, pillers posts and struts upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
Providing and laying mechanically mixed and vibrated reinforced concrete work grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footing, base of colums, and the like mass cooncrete etcetra up to all floor five level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and laying tor steel of Thermo -Mechanically treated bars of grade Fe_500D of TATA,TISCO, SAIL, Jindel steel, Kamdhenu steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six sand: twelve graded crushed stone aggregate 20 mm (Twenty millimetre nominal size) raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all heights, leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all heights, leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Boulder filling/stone soiling dry hand packed tightly under flooring complete in all respect including carriage of material within all heights, leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing first class sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing 40 mm (forty millimetre) thick panelled glazed or panelled glazed shutterfor doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.within all leads and lifts as per the direction of Engineer-in-Charge.
Providing and fixing 300x16mm (three hundred milimetres X Sixteen milimetres) aluminium sliding door bolts, make of PILOT/Sheel anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and fixing 200x10mm (Two hundred into ten millimetre) aluminium Tower bolts make of PILOT/Sheel or equivalent, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing 100x10mm (One hundred into ten millimetre) aluminium Tower bolts make of PILOT/Sheel or equivalent, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing 125mm (One hundred twenty five millimetre) aluminium Handles make of PILOT/Sheel or equivalent, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing 100mm (One hundred millimetre) aluminium Handles make of PILOT/Sheel or equivalent, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing aluminium hanging twin rubber floor door stopper make of PILOT/Sheel or equivalent, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing bright finished aluminium hard drawn hooks and eyes : 100mm size complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Steel work welded in built up sections joints channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like of TATA/SAIL/Jindal Steel/ Kamdhenu Steel in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint i/c framed work with angle tees 40x6mm including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet TATA / Shakti / Jindel in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials within all leads, lifts of materials and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing ridges or hips laying propper Gola/ shape 60cm (Sixty centimeters) over all with 0.60mm (Zero point Six zero millimeters) thick prepainted sheet ridges with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero milimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three milimetres) size dome shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres) dia bars in dome bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of materials within all leads, lifts and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge complete. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing plain M.S. mild steel B.P. sheet 2mm (Two milimetres) thick fixed in eaves board/ceiling/cutting soffits /ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and laid for separately) including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing flushing 38cm (Thirty eight centimetres) overall with 0.60mm (Zero point six zero millimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 100mm (One hundred millimetres) dia P.V.C. (D-Plast) rain water pipes class-B on wall face of working pressure not less than 4.5 Kg Per CM2 (four point five Kilograms per square centinetres) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as directed by the Engineer-In-charge, including entire carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 100mm (One hundred millmetres) dia plain bend on wall faces P.V.C. (D-Plast) accessories for rain water pipes class-B wall face working pressure not less than 4Kg Per CM2 (four point five Kilograms per square centinetres) confiming to IS Code 4985-2000 is including filling the joints with approved adhesive complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 100mm (One hundred millmetres) dia plain shoe on wall faces P.V.C. (D-Plast) accessories for rain water pipes class-B working pressure not less than 4 kg/cm2 (four point five kilograms per sqaure centimetres) confiming to IS Code 4985-2000including filling the joints with approved adhesive complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing galvanised M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (TEn into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size including cost of cutting holes and making good the walls etcetera; including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 6 mm ( Six Milimetres) thick including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 20 mm ( twenty millimetre) average thickness kota stone slab flooring 20 mm (twenty millimetre) thick base of cement mortar 1:4 ( one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15mm (Fifteen milimetres) thick cement plasters in single coat on rough/ fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian or equivalent after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushin wood primer pink including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian or its equivalent with enamel paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter including carriage of materials wthin all leads, lifts of materials and other incidentals, as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Distempering (two or more coats) with synthetic acrylic oil bound washable distemper with Nerolac/ Asian or equivalant of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth including carriage of material within all leads, lifts of materials and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads, lifts of materials and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Design, engineering, fabrication, supply, erection, testing and commissioning of furnace control panel complete with all necessary switches, auxillary and power contactors, measuring instruments, indicating lamps, etc. The furnace control panel will be floor mounted, self supporting indoor type, dust and vermin proof, fabrication from sheet metal work of 2.5 thick MS Sheet with hinged cover with locking arrangement. The top, bottom and the rear door (where the instrument will be mounted) will be made of 3.15 MM thick MS Sheet. The Panel will be painted 2 coats of Red Oxide as primer and final by synthetic light grey shade as per IS - 631. 4 X 3 X 1 Feet (L X H X D) complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Supply, installation, testing and commissioning of Fresh Air injection system. Capacity 1 cubic metre and withstand pressure upto 10 kg/ Cm2 including Forced Draft fan impleller made of alloy to withstand temperature rise in continuous duty in surrounding ambience, Mild Steel ducting of self supporting type, butter fly valves as per design including connection to primary and secondary combustion chamber through heat resistant nozzles etc. complete with induction motor of 2 HP rating. 3 ph, 415v, 50hz motor coupled with required belt pulley arrangement complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Supply & fixing the Thermocouple Heat sensing range 0 to 1200 degree Celsius having (Cr - Al) sensor housed in SS 304 casing of dimension 1200 mm long × 22 mm OD complete encased and to be fitted with terminal on other end for connection of fire retardant. Compensating wire of 2 cores 1.5 sq. mm. for heat sensing from thermocouple to Temperature controller covered with asbestos embedded rope about 50 metre length complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
BURNERS with Gastrain & Airfan :- High quality burners of maximum fire load of 358kw switches and fitted with high/low regular with Spark gas 35pw/w with lonisation probe with On/Off Solenoid Safety Valves. The Burners should be equipped with air fan to supply combustion air capable of providing adequate air flow. OSSPL / OXILON Gas burner complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Design, fabrication, supply and Installation and testing commissioning of complete structural work for furnace. Made out of Mild Steel, Rear & Bottom side plate of adequate thickness and welded or bolted in proper manner complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Furnace Charge Door manually operated with counter weight. Made out of 6 mm plate of suitable size and shape with hinge and electro-mechanical interlock. Door shall be internally lined with ceramic blanket etc. Supply & fixing of main door driving shafts handle assembly for electro-mechanical door operation, 50 mm dia roller block with bearing assembly (2 sets each), 1" pitch roller chain 300 mm long with chain link 2 no. and 3/4" pitch roller chain 1000 mm long with chain link couplet. And Supply and fixing of 2 nos. iron door of 5 mm thick ms plate with hinge and locking arrangement for removing burnt bones and ashes complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Supply and installation testing commissioning of door guider and slide rails set and stainless steel duct for flue exhaust path from furnace bottom to the pollution control unit. Made with heavy MS sheet with fire brick insulation complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Supply and installation testing commissioning of position hydraulic pallet type body Charging trolley with handle. Made out of suitable M.S chequered plate for platforms complete with heat resistant roller etc. complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Supply, instaliation, testing and commissioning of complete set of refractory shaped bricks with Refactory work of furnace in both primary and secondary combustion chambers (a) Complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of burners, resting of dead body with sufficient opening for falling of ashes to the ash chamber and sufficient ventilation for fresh air spraying (b) Complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out ashes from the rear side and sufficient ventilation for fresh air injection (c) Complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air injection to the ash chamber and cremation chamber. IS. 8 as required, insulation bricks, Moderate heat duty fire bricks of suitable size shall be used for minimum loss of heat conforming to IS – 2042 and IS - 6, refractory slab for construction of flue duct passage in the basement, as required, refractory heat resistant fire clay mortar as required, ceramic blanket (Glass Wool) of required size complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
There should be ceramic insulation on outer surface furnace to minimise the heat loss through radiation. Maximum allowable outer surface temperature rise should be limited to 10 degree celcious only over ambient. Maximum heat loss should not exceed 3-4 Kw. complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Design, engineering, fabrication, supply, installation testing and commissioning of Venturi with packed wet scrubber and accessories complete including piping as required. SS built with SS Casing 3 MM complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Design, engineering, Supply, installation, testing and commissioning of induced draft fan impleller made of alloy to with stand temperature rise in continuous duty in surrounding ambience. MS sheet covering, with induction motor 5 HP, 3 phase, 415v, 50 hz and other accessories such as belt pulley complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Design, engineering, supply, delivery at site, installation, testing and commissioning of MS self supported chimney. 100 ( one hundred) feet high, five segments of chimney made of 10 mm sheet at bottom, 8/6 mm sheet at middle and 5 mm sheet top complete with canopy at the top. Foundation bolts of 1200 mm with 32 mm dia, 20 mm base plate and flanges complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
Design, engineering, supply, installation ,testing and commissioning of re-circulation water pump motor alongwith necessary pipe line and accessories. 2 HP direct coupled complete including carriage of materials within all leads, lifts and other incidentals and furthe as per specification. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
DEEPAK KUMAR
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .