PROVN OF RE-ALIGNMENT OF ELECT LINE NEAR BLDG NO. E 36 E-38 E 50 and P 82 AMN DUMP 15 MTR AWAY FROM BLDG and CONSTRUCTION OF LIGHTNING CONDUCTOR IN VARIOUS BLDGS OF 891 FD REGT AT ALHILAL MIL STN

Amount

Excavation in trenches not exceeding 1.5m wide and not exeeding 1.5m in depth and getting out in soft/loose soil for removing/laying of cable etc complete all as specified and directed.

All as per the description of serial item No 02 above but for depth exc 1.5 mtr and not exc 3.00 mtr.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25cm thick, complete all as specified and directed .

Removing surplus excavated soil to a distance not exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

Dismantling of concrete/steel poles of any description in any position including taking out poles complete all as specified and directed.

Steel tubular swaged pole complete with cast iron base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9 metre long) including one coat of red-oxide zinc chrome primer and two coats aluminium paint on surfaces, exposed to view and making 30cm wide strips (Total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including with writing of pole No with letters/ figures of size not exc 30 mm with black paint on a yellow circle of dia 75 mm after painting, complete all as specified and directed. Note: PCC, earth work shall be measured and paid separately under respective items.

Dismantling of over head (ACSR) aluminium conductor steel reinforrced of any size from HT/LT line after opening the binding from insulators and kept in safe custody for reuse serviceable ACSR conductor in the work and removing unserviceable conductor from the site complete all as specified and directed .

Supply, laying and testing cable XLPE insulated screend PVC bedded, galvanised steel strip or wire armoured electric power cables (Heavy duty) 1100 Volt grade with multi stranded aluminium conductor of cross sectional area 10 Sqmm 4 core, laid in trenches or passing through pipe complete all as specified and directed and directed. Note : Earth work, sand cushioning & bricks shall be measured and paid separately.

Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed

Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

40mm dia bore galvanized iron tubing, light grade including all fitting for cable protection elc laid in floor, trenches or fixed to poles with clamps etc complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in foudations, filling and mass concrete for foundation concrete in poles/stays complete all as specified and directed.

Supply, installation, commissioning and testing LT feeder pillar box outdoor type of size 0.90 mtr x.0.50 mtr x 0.60 mtr factory fabricated made out of MS sheet of thickness 3.15 mm with front door openable with locking arrangement mounted on angle iron legs made out of angle iron size 40 mm x 40 mm x 6 mm, 1.0 mtr long, 0.50 mtr above ground level and 0.50 mtr embedded in PCC blocks of size 0.30 mtr x 0.30 mtr x 0.50 mtr - 04 Nos, duly painted with two coats of synthetic enemel paint over a coat of red oxide, complete with 200 Amp rated copper bus bar LED phase indicators, suitable for 3 phase 4 wire supply system with MCCB 63 Amp 4 pole breaking capacity 16 KA -01 No, duly drilled holes for cable connection mounted on epoxy based post insulators all as required at site, complete all as specified and directed .

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to galvanized iron strip of size 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 40mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. NOTE: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

Highly Efficient 45W LED Street Light with lens made of pressure die cast aluminium housing and enclosed with toughened glass, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to the degree of protection IP-66 suitable for pole dia Ø 35/40 mm on existing poles complete all as specified and directed .

S&F PVC junction box with TPN aluminium bus bar and MCB SP 6 Amp-01 No. complete including fixing arrangeemnt complete all as specified and directed.

Street light bracket made out of GI pipe 40mm dia medium grade GI Pipe minimum 1.5 Mtr long including fixing with 02 Nos MS clamps made out of flat iron of size 40mm x 6 mm with nut bolts and washer complete all as specified and directed.

Single pointed air termination aluminium rod, 12mm dia, 300 mm long complete all as specified and directed.

Aluminium strip 25 X 3.15 mm with saddles and fixing screws etc, for roof conductors and down conuctors above ground complete all as specified and directed.

S&F GI strip 32 x 6mm complete with saddles and fixing screws etc. for fixing the strip complete all as specified and directed.

Test point terminal block made of gun metal or phosphorus bronze, size 75 X 75 X 25mm drilled and screwed including 3 Nos, 8mm dia, 25mm long hexagonal head screw complete all as specified and directed.

M/S MALHI CONSTRUCTIONS