REPAIR MAINT OF OTM MD ACCN REPAIR TO SEWAGE LINES SEPTIC TANKS SOAKAGE WELLS CLEANING OF MANHOLES AND SEWER LINES AT NAINITAL UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Supply & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete as specified and directed

Supply & fixing Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete aa as specified and directed

S&F of 0.80mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital or similar pattern roof covering (to be provided as per the existing pattern to match with same side by side ) with grade of Zinc coating 120 gm/sqm both sides inclusive fixed with flat iron clip of size 20x3mm complete all as specified and directed.

Supply & fixing 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side laps, fixed with coach screws and washers as in roofs, walls etc with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.

Supply & fixing 0.63mm thick Plain, galvanised, mild steel sheeting, as in roof, ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.

S&F in repairs 150mm dia galvanised mild steel sheet eaves, gutter made of 1.00mm thick sheet having zinc coating @ 120 gram per sqm inclusive of both sides, half round with rounded edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm coloured joint free tiles as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over with and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

Material & Labour for 300x450x7mm thick glazed ceramic tiles coloured, design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over with and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Vitrified tiles 8 to 10mm thick light shade (square/rectangular) polished, area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and lointed in neat cement slurry over with and including screed bed of 15mm thick 1:6 and pointed in white or coloured cement to match as in floor tec all as specified.

M&L Vitrified tiles 8 to 10mm thick light shade (square/rectangular) polished, area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm, in dado, skirting etc, set and lointed in neat cement slurry over with and including screed bed of 10mm thick 1:4 on vertical surfaces/skirting complete all as specified and directed.

Dismantling of wall and ceiling board (fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

Supply & fixing GI frame work powder coated of seamless / made in panels (605x605mm) sealing comprising of GI perimeter cahnnel 0.55 mm thick with two unequal flanges of 20 and 30mm & web of 75mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intrmediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expension fasteners with and including sealing sections (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flenge of 26 mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L 4mm thcik Non asbestos fibre cement building board (E-board classic) fixed or laid/inserted to timber/GI/Aluminium frame work with screws.

S&F in repairs PVC tiles / sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors thickness in 1.50 mm fixed in repair all as specified and directed.

F&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Demolition of brick work or stone masonry or precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for precast cement concrete block masonery with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engg-in- charge

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material & Labour for 15mm thick rendering on other than fair faces of brick work or stone masonry surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. .

Material & labour for preparing newly plastered surfaces of wall, applying a layer of wall care putty 2mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coat of oil bound distemper over a coat of primer complete all as pecified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Material & Labour 2nd class hard wood as in scantling clean sawn of any description as in floor in unframed work complete all as specified and directed.

Dismantling of timber fillets, rails, post rafters, purlins etc,under 40 sqcm in section unframed work complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 13 sqcm but not exc 25 sqcm complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 40 mm thick 2nd class hard wood (SAL) boarding planed one side with butt joints and fixed with nails as in flooring & skirting complete all as specified and directed.

S&F in repair 12 mm thick plywood, grade BWP, type BB fixed with screws to timber frame work.

S&F in repairs, laminated flooring 8.3 mm thick hard board planks make : BWG Crona, hampshire, Oak both side laminated with decorative surface of make FD spaze, design No. 1890 or its equivalent approved make laid above the thermoplastic sheets as in flooring complete all as specified and directed.

S&F 25mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roof, ceiling partition, fascia, barge, soffit etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc. Complete all asspecified and directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Material & Labour Chequred cement concrete tiles 20cmx20cmx25mm thick coloured rubber pressed glossy finish of approved pattern & shade as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over with and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

S & F MS steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS 1786-1985 complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & Fixing framed work such as in purlin , truss, square tube, MS pole, guard bar, gate grills, grating etc with ends of bars shouldered and/or rebated,or forged into spike frame guard bars,wake way,railing,frame work of water tank and similar work such as purlin, truss, square tube etc confirming to Fe-290-Gde-E- 165 complete all as specified and directed.

S&F welded wire steel fabric exc 4 kg per sqm, 25 x 25 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including fixing with steel frame work with welding complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down shutter only area n. exc. 1.00 sqm each and removed by the contractor complete all as specified and directed.

Taking down shutter only area exc. 1.00 sqm but n.exc 2.00 sqm each and removed by the contractor complete all as specified and directed.

Supply & Fixing flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 grade-E165 with and including necessary nut-bolts, washers, screws etc, as required complete all as specified and directed.

Material and labour PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in hold fast, bed block, etc, incuding necessary form work complete all as specified.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers or 9 mm BWP commercial plycomplete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, (with out sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply & Fixing 75mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing 150 mm size anodised aluminium handle cast type anodised complete all as specified and directed.

Supply & Fixing 125 mm size anodised aluminium handle cast type anodised complete all as specified and directed.

Supply & Fixing 200mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing100mm long Aluminium tower anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium powder coated door with shutter and frame of aluminium section sliding type as per following specifications with and including round type aluminium handle, tower bolts, hinges, panes etc and as directed at site. Make Jindal or its equivalent approved make :- (a) DOOR FRAME : 100X44X1.6mm section for complete frame. (b) DOOR SHUTTER : Top & bottom rail of 100x44x1.6 mm, middle rail of 83 x 44 x 1.6mm, both styles of 83 x 44 x 1.6 mm size shall be used. (c) GLASS PANE : 5mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc. (d) Jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as 100mm long 03 Nos. hinges, aluminium handles , aluminium tower bolts ,and mortice lock 6 Levers etc complete all as specified and directed

Supply & Fixing door closer hydraulically regulated universal type fixed made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply & Fixing in repairs of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainlesssteel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Supply & Fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.80 mm thick plain or tinted ordinary quality sheet glass an glazing with oil putty/rubber gasket in square area exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face both faces and fixed with screws to timber frame work complete all as specified and directed.

Supply & Fixing in repairs fancy type pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed

Supply & Fixing in repair 15mm dia chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Excavation in trenches n exc 1.5m wide & n exc 1.5m in depth in hard/dense soil for foundation etc or for manholes, shafts etc n exc 10 sqm on plan and getting out complete all as specified and directed.

Returning, filling, including spareading, levelling, watering and well ramming in layers n. exc. 25 Cm in hard/dense soil complete all as specified & directed.

Removing surplus excavated soil to a distance n. exc 50mtr & depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for Cleaning of blocked sewage lines (SWG/RCC/CI PIPES) 100mm/150mm/200mm bore dia. systematically using necessary tools mechanically and /or manually such as by rodding, passing rop knots, bamboo fanti and disc of required size (with safety measure such as dirt and gas etc), flushing the pipe well with water till clear flow of sewage from both side between two adjacent manhole/gully traps of any depth, taking out sludge in semi liquid stage including all water effluences etc and removing all materials from site of work upto a distance not exceeding 50m and depositing in earth pit of suitable size with and including necessary excavation and earth work of pit in any type of soil including supply and sprinkling bleaching powder and covering sludge with earth after removal of blockage etc complete all as specified and directed.

Taking off existing covers of manholes & cleaning of manholes of any size/capacity by dewatering and taking out sludge in liquid mud, silt or in solid state after emptying the solid/waster water by manual or by mechanical means and removing the sludge to a distance n exc 50m and burying the sludge in newly excavated pit of suitable sizes with and including necessary excavation and earth work of pit in any type of soil and covering the same with excavated earth and placing in position the removed covers complete all specified and directed

Cleaning of blocked / chocked WC (any pattrern) including drain/ sewer/sewage line of any discription(SGSW/RCC/CI pipe) of 100mm/150mm/200mm dia or any dia at any depth by rodding or by mechenical means and well flushing the complete sewer line with water upto first manhole to the entire satisfaction of Engineerin-charge with and including taking out and re-fixing of manhole covers where required complete all as specified and directed.

Taking off existing cover of septic tanks/soak well & cleaning of septic tank/soak well of any size/capacity by mechenical sewage sucking pumping machine and transport the sludge in to a mechanical sewage carrier tank for removing the same to a distance 10 to 15 KM from defence land and placing back in position the removed cover complete all as spd and directed by Engineer-in-Chage. Note :- Nett quantity of sludge as removed shall be measured and paid.

M & L cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in benching and channels of manholes incl necessary form work complete all specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

M & L for providing pre-cast cement concrete landing, cover slabs for manholes and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 including necessary form work complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in fair finished surface of concrete complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.

Demolition and breaking up existing drain pipes (SWG, AC or RCC) 150 mm bore set in cement mortar incl cement concrete bedding haunching etc and removing from site to a distance n exc 50m as directed all as specified and directed.

S & F 150 mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & laid in trenches or in floors for sewage lines complete all as specified and directed.

M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Taking down AC rain water pipes (any size or pattern) including all fittings heads shoes bends swan necks etc complete.

S & F 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

S & F 75 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls as in vent pipe complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) with all necessary fittings and accessories fixed concealed (including chase cutting in PCC block/ brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 93 here in before but one light point controlled by two 2- way switch

All as per item No 93 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 93 here in before but one 3 pin socket outlet 5 Amp controlled by one, one way switch on indipendent board..

All as per item No 93 here in before but one bell point controlled by one bell push switch.

All as per item No 93 here in before but wiring with using cable 2.50 sqmm size, two single core copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size, one single core copper wire for one 6 pin socket outlet, 15/16 Amp.

Supply and fixing of lamp holder (Dome type), PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply and fixing in repair switch piano flush type single pole one-way 5/6 Amp complete all as specified and directed.

Supply and fixing in repair switch piano flush type single pole one-way 15/16 Amp complete all as specified and directed.

Supply and fixing in repair switch piano flush type single pole two-way 5/6 Amp complete all as specified and directed.

Supply and fixing in repair socket outlet 2-in-1, 3 pin 5/6 and 15/16 Amp flush type, complete all as specified and directed.

Supply and fixing in repair socket outlet 2-in-1, 3 pin 5 Amp flush type, complete all as specified and directed.

Supply and fixing Bell push, flush type, 5 Amp complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts, 50Hz single pole complete all as specified and directed.

Supply and fixing of ceiling rose, PVC / polycarbonate isolated body three terminal with base plate complete all as specified and directed.

Supply and fixingModular type, white polycarbonate, switches, sockets, fan regulators suitable for 250 watt, AC, 50Hz electrical supply, 6 Amp one way switch complete all as specified and directed.

All as per item No 108 here in before but 6 Amp 2 way switch

All as per item No 108 here in before but 6 Amp 2/3 Pin combined socket shuttered, two module

All as per item No 108 here in before but modular switch one way, 16 Amp, one module

All as per item No 108 here in before but modular socket 6 Amp/16Amp, 2/3 Pin combined, 2 Module

All as per item No 108 here in before but 6 Amp bell push switch modular type

Supply and fixing modular front plates, 2 module, white with frame on existing boxes complete all as specified and directed.

Supply and fixing modular front plates, 3 module, white with frame on existing boxes complete all as specified and directed.

Supply and fixing in repair anodised rust proof 18 SWG MS box, flush type of size 75mmx105mmx50mm deep (1-2 Module (to be same make as modular switches and sockets )) to be recessed on wall/gypsum partition complete all as specified and directed.

Material & labour for sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated and unsheathed and stranded copper conductor cable ISI marked, drawn into and including rigid non metallic PVC conduit (ISI marked) Heavy grade, 20mm dia (external) inclusive of junction/terminal boxes, all fittingss and accessories fixed concealed with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/colour/distemper etc including taking down existing old sub main wiring all as specified. NOTE: (Note :- 2 runs of 4 sqmm, one run of 2.5 sqmm and one run of PVC conduit shall be measured as one unit i.e one running meter).

Supply & Fixing LED lights fittings 1x20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours complete all as specified and directred. Note:- LED tube light shall be purchase to get minimum 2 year warrenty of material from manufacturer.

Supply & Fixing in repair 240 V, 10 KA 'C' curve miniature circiut breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directred.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directred.

Supply and fixing in repair Geyser elements 1500 watts (triangular type) complete all as specified and directed.

S S CONSTRUCTION CO

M/s RN Kharwar & Sons

Ramsons

M/s RK JOSHI&SONS

Joshi Constructions