Providing and Fixing of Facade lighting arrangement for the RMC Office Building.(Under General Funds / Pushkaram Funds) (Recall)

Supply of rectangular/linear-shaped architectural RGBW LED flood light Eveready Make , Model no LPL0050FL0060002 /its Equivalent make with integral driver and housing made of pressure die-cast aluminum L295mm X W87mm X H163mm (Dimension Tolerance is ± 5mm). The luminaire shall be suitable for façade lighting applications. The luminaire housing shall be made of pressure die-cast aluminum with black/Gray/Stone color powder-coated finish and shall incorporate a dedicated heat sink for enhanced thermal performance and corrosion resistance. The luminaire shall be provided with a top visor and weatherproof silicon gasket between the optical cover and LED chamber to ensure proper IP66 ingress protection, The diffuser shall be made of high-quality polycarbonate diffuser cum lens . The luminaire shall have a Optional beam angle of 10°/30°/60°/90° (±10%) with precision optics.The luminaire shall have impact resistance IK08 The luminaire shall be equipped with high-performance Bridgelux / Seoul Semiconductor or equivalent LEDs capable of producing RGBW output, The fixture shall have a system wattage not exceeding 50W (±10%), with luminaire efficacy minimum 50 lm/W (±5%), power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.23A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC . The driver shall be integral type with protections against over-voltage, short circuit, and open circuit conditions, The luminaire shall have inbuilt surge protection of 4kV and

external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C, The optical assembly shall be securely sealed using silicon gasket to maintain ingress protection and long-term outdoor durability against dust, moisture, and sunlight. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts,and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours. The luminaire shall be of Class I electrical insulation, The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of rectangular/linear-shaped architectural RGBW LED flood light Eveready Make, Model LEDFLLRGBW100-V15/its Equivalent make with integral driver and housing made of pressure die-cast aluminum L518mm X W93mm X H163mm (Dimension Tolerance is ± 5mm). The luminaire shall be suitable for façade lighting applications. The luminaire housing shall be made of pressure die-cast aluminum with black/Gray/Stone color powder-coated finish and shall incorporate a dedicated heat sink for enhanced thermal performance and corrosion resistance. The luminaire shall be provided with a top visor and weatherproof silicon gasket between the optical cover and LED chamber to ensure proper IP66 ingress protection, The diffuser shall be made of high-quality polycarbonate diffuser cum lens . The luminaire shall have a Optional beam angle of 15°/30°/60°/90° (±10%) with precision optics. The luminaire shall have impact resistance IK08 The luminaire shall be equipped with high-performance Bridgelux / Seoul Semiconductor or equivalent LEDs capable of producing RGBW output, The fixture shall have a system wattage not exceeding 100W (±10%), with luminaire efficacy minimum 50 lm/W (±5%), power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.44A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC . The driver shall be integral type with protections against over-voltage, short circuit, and open circuit conditions, The luminaire shall have inbuilt surge protection of 4kV and external surge protection up to 10kV, The luminaire shall have an operating

temperature range of -10°C to +50°C, The optical assembly shall be securely sealed using silicon gasket to maintain ingress protection and long-term outdoor durability against dust, moisture, and sunlight. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours. The luminaire shall be of Class I electrical insulation, The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of linear-shaped architectural RGBW LED wall washer Eveready Make, Model No LEDLWRGBW018-B15/ Equivalent make with integral/external driver and housing made of aluminum extrusion, Dimension L1030mm X W48mm X H99mm Tolerance is ± 5mm. The luminaire housing shall be made of extruded aluminum with suitable surface treatment for durability and corrosion resistance. The luminaire shall be provided with a silicon gasket between optical cover and housing to ensure proper IP66 ingress protection. The optical cover shall be made of toughened glass , and the optics shall consist of high-quality PC lens . The luminaire shall have an asymmetric beam angle of 15°/30°/15° × 30°/15° × 60° (±10%) for effective wall washing applications. The nominal weight of the luminaire shall not exceed 2.34 kg (±10%) . The luminaire shall have impact resistance IK07, The luminaire shall be equipped with high-performance Seoul / Lattice Power or equivalent LEDs capable of producing RGBW output. The fixture shall have a system wattage not exceeding 18W (±10%) , with luminaire efficacy minimum 50 lm/W (±5%) , power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.078A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC. The driver shall be integral or

external type with protections against over-voltage, short circuit, and open circuit conditions. The luminaire shall have inbuilt surge protection up to 4kV and external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C. The luminaire shall be suitable for wall, ceiling, and floor mounting , and shall be supplied with adjustable mounting brackets for proper alignment and installation. The optical assembly shall be securely sealed to ensure long-term outdoor performance against dust, moisture, and environmental conditions. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours, The luminaire shall be of Class I electrical insulation. The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of linear-shaped architectural RGBW LED wall washer Eveready Make, Model no LPL0040LN0020002 / its Equivalent make with integral/external driver and housing made of aluminum extrusion, Dimension L1030mm X W65mm X H109mm Tolerance is ± 5mm. The luminaire housing shall be made of extruded aluminum with suitable surface treatment for durability and corrosion resistance. The luminaire shall be provided with a silicon gasket between optical cover and housing to ensure proper IP66 ingress protection. The optical cover shall be made of toughened glass , and the optics shall consist of high-quality PC lens . The luminaire shall have an asymmetric beam angle for effective wall washing applications. The nominal weight of the luminaire shall not exceed 2.5 kg (±10%) . The luminaire shall have impact resistance IK07, The luminaire shall be equipped with high-performance Seoul / Lattice Power or equivalent LEDs capable of producing RGBW output.

The fixture shall have a system wattage not exceeding 40W (±10%) , with luminaire efficacy minimum 50 lm/W (±5%) , power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.26A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC. The driver shall be integral or external type with protections against over-voltage, short circuit, and open circuit conditions. The luminaire shall have inbuilt surge protection up to 4kV and external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C. The luminaire shall be suitable for wall, ceiling, and floor mounting , and shall be supplied with adjustable mounting brackets for proper alignment and installation. The optical assembly shall be securely sealed to ensure long-term outdoor performance against dust, moisture, and environmental conditions. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours, The luminaire shall be of Class I electrical insulation. The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of programmable DMX512 Model No 91009928/its Equivalent lighting controller for architectural façade lighting systems, capable of advanced control, scene management, and synchronization of RGB/RGBW luminaires. The controller shall be suitable for façade lighting applications. The controller shall be housed in a compact, durable body with approximate dimensions of 160 mm × 90 mm × 45 mm (±10%), suitable for panel mounting or desktop installation. The nominal weight of the unit shall not exceed 0.27 kg (±10%). The controller shall support DMX512 output protocol and shall be capable of controlling multiple luminaires with multi-zone functionality, extended triggering, and 16-bit channel control for smooth dimming and color transitions. The controller shall feature an intuitive backlit interface with 10 programmable preset buttons, along with dedicated buttons for scene selection and zone control to allow quick and easy operation. The controller shall support programmability via Windows, Mac OS, iOS, and Android platforms using compatible lighting control software. It shall be compatible with operating systems including Windows 8.1 (64-bit) onwards and Mac OS X 10.13 onwards . The controller shall include internal memory support via microSD (SD/SDHC up to 32GB) for storing lighting programs, scenes, and effects. The unit shall provide multiple connectivity options including Type-C USB, XLR3 (DMX output), Ethernet, and 20-pin (2×10) IDC connector, along with support for 2 TCP/IP connections. The controller shall also support remote operation via mobile applications over Ethernet/Wi-Fi network as optional and based on subscription. The controller shall operate on 5–5.5V DC input supply (0.6A). The controller shall have an operating temperature range of 0°C to +50°C and shall be suitable for indoor installation with IP20 protection rating. The controller shall comply with relevant standards such as ETL, EC, EMC, and RoHS. The controller shall enable seamless integration, reliable data transmission, and synchronized control of façade lighting fixtures across multiple zones.

Supply of programmable DMX Address Writer Model No 91010514/Equivalent (RGBW Addressing Device) for architectural façade lighting systems, suitable for writing addresses and configuring parameters of DMX-based luminaires. The address writer shall be housed in a compact and robust enclosure made of aluminium alloy, with approximate dimensions of 173 mm × 88 mm × 38.5 mm (±10%). The nominal weight of the unit shall not exceed 0.5 kg (±10%). The device shall support DMX and TTL protocols and shall function as a DMX encoder and addressing tool for configuring lighting fixtures. The unit shall have a single data output port supporting RS-485 / 5V TTL / 12V TTL signal output for compatibility with a wide range of DMX luminaires and pixel fixtures. The address writer shall support data input through SD card and shall be capable of handling up to 1920 channels per device. The device shall feature a user-friendly LCD display interface for easy operation and configuration. It shall support DMX console simulation function , allowing control of up to 18 channels simultaneously , along with multiple inbuilt test effects for fixture testing and commissioning. The device shall support 0–255 grayscale levels for precise control and addressing. The unit shall operate on multiple power input options including Micro USB (DC 5V, 2A), DC 12V–24V (1A) , The device shall have a power consumption not exceeding 10W. The address writer shall be suitable for indoor use with IP20 protection rating. The unit shall be designed for reliable operation during installation, testing, and commissioning of DMX lighting systems.

Supply of 8-channel DMX Booster/Splitter Model No. 6SCRDM8T000 for architectural façade lighting control systems, suitable for distribution and amplification of DMX512 signal for synchronized lighting. The DMX splitter shall be designed in a rack-mountable metal Body with approximate product dimensions of 485 mm (W) × 140 mm (L) × 50 mm (H) (±10%). The enclosure shall be robust, suitable for indoor control panel/rack installation, and ensure long-term reliability. The device shall have 1 DMX input (male XLR socket) and 8 isolated DMX outputs (female XLR sockets) to distribute signal efficiently. Each output channel shall be provided with individual status indicators (LED indicators) for monitoring signal presence and operation. The DMX splitter shall support data transmission up to 50 meters per output channel using 14/36 SWG signal wire or equivalent. The unit shall operate on 220V AC, 50Hz supply. The DMX splitter shall act as a signal booster and isolator , ensuring stable data transmission, minimizing signal loss, and protecting connected fixtures from signal interference or failure. The device shall be suitable for DMX512 lighting control systems and shall ensure seamless synchronization of multiple luminaires in façade lighting applications. The nominal weight of the unit shall not exceed 3.5 kg (±10%). The unit shall be designed for continuous operation in professional lighting environments and shall provide high reliability and performance stability. The DMX splitter shall be compatible with all standard DMX controllers and fixtures used in architectural lighting systems. The successful bidder shall submit the following documents for approval prior to supply: product data sheet and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of a Male–Female XLR 3-pin connector Model No LPL0000LS0010050/ its Equivalent assembly complete with 1-meter length of 3-core wire, designed to ensure durable, safe and reliable DMX signal transmission for architectural and façade lighting systems. The connector assembly shall be constructed with high-quality insulation, secure terminal contacts and effective strain relief to prevent cable damage and ensure stable performance under continuous operation. The 3-core wire shall be compliant with relevant electrical and data-signal standards suitable for DMX512 applications. The unit shall meet applicable safety certifications and shall be fully compatible with standard electrical specifications used in professional lighting installations. The design shall prioritize user safety, easy installation, and long-term reliability, ensuring proper and interference-free DMX signal transfer across the connected lighting network including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

The scope of work shall include the complete supply, installation, DMX programming, testing, and commissioning of the architectural façade lighting system as per approved drawings, specifications, and design intent. The contractor shall supply all specified aterials including luminaires, drivers, DMX control systems, controllers, splitters, address writers, cables, conduits, junction boxes, connectors, mounting brackets, and all associated electrical and mechanical accessories required for proper installation and operation of the system. The contractor shall be responsible for complete installation in a professional and workmanlike manner, ensuring proper alignment of fixtures, secure fixing, accurate focusing, and aesthetically neat routing of cables. All works shall be executed carefully to ensure that the existing façade finishes and structural elements are not damaged during installation. All necessary accessories, fittings, consumables, and minor items required for successful completion of the project, whether specifically mentioned or not, shall be deemed to be included within the scope of work without any additional cost implications. The contractor shall carry out DMX addressing, programming, scene creation, and synchronization of all lighting fixtures to achieve the desired dynamic lighting effects as per approved design concept. The complete system shall be tested and commissioned to ensure reliable performance, proper communication between all components, and compliance with specified technical parameters. Upon completion, the contractor shall ensure that the entire installation is fully functional and operational in all respects. The contractor shall also submit necessary documentation including as-built drawings, programming details, and operation manuals, and hand over the system in complete working condition to the client/authority including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

The Contractor shall provide Comprehensive Operation & Maintenance for 5 years from the date of successful commissioning. With the fallowing due ProceeduresA. Preventive Maintenance – Quarterly1. Cleaning of all fixtures, lenses, and brackets2. Checking all connections, cable glands, waterproofing3. Testing DMX controller, scenes, timer, and software backup4. Tightening of all bolts, brackets, SS hardware5. Megger test of cables and Earth resistance test <5 Ohms6. Submission of PM report with photos to EE ElectricalB. Breakdown Maintenance – 24x48 Hrs1. Attend any fault complaint within 24 hours2. Rectify within 48 hours3. Replacement of failed LED driver, module, or controller at no extra cost during warranty/AMC4. Emergency call support on phoneC. Consumables CoveredAll spares including LED modules, drivers, fuses, MCB, DMX cards, cables up to 10m. Not Covered: Damage due to theft, vandalism, lightning without SPD, civil work including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply,delivery and fixing of Near Flag pole around the entrance In-Ground Luminaire-3000K-24°-Stainless Steel-240Vac-Toughened Clear Glass-9W-Ø116 x 153->90-3 Years Code: 24146-30-024-006-240-000-009-015-C90-003 69408 - IH-9W IG Mounting Sleeve including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

Supply of rectangular/linear-shaped architectural RGBW LED flood light Eveready Make , Model no LPL0050FL0060002 /its Equivalent make with integral driver and housing made of pressure die-cast aluminum L295mm X W87mm X H163mm (Dimension Tolerance is ± 5mm). The luminaire shall be suitable for façade lighting applications. The luminaire housing shall be made of pressure die-cast aluminum with black/Gray/Stone color powder-coated finish and shall incorporate a dedicated heat sink for enhanced thermal performance and corrosion resistance. The luminaire shall be provided with a top visor and weatherproof silicon gasket between the optical cover and LED chamber to ensure proper IP66 ingress protection, The diffuser shall be made of high-quality polycarbonate diffuser cum lens . The luminaire shall have a Optional beam angle of 10°/30°/60°/90° (±10%) with precision optics.The luminaire shall have impact resistance IK08 The luminaire shall be equipped with high-performance Bridgelux / Seoul Semiconductor or equivalent LEDs capable of producing RGBW output, The fixture shall have a system wattage not exceeding 50W (±10%), with luminaire efficacy minimum 50 lm/W (±5%), power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.23A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC . The driver shall be integral type with protections against over-voltage, short circuit, and open circuit conditions, The luminaire shall have inbuilt surge protection of 4kV and

external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C, The optical assembly shall be securely sealed using silicon gasket to maintain ingress protection and long-term outdoor durability against dust, moisture, and sunlight. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts,and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours. The luminaire shall be of Class I electrical insulation, The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of rectangular/linear-shaped architectural RGBW LED flood light Eveready Make, Model LEDFLLRGBW100-V15/its Equivalent make with integral driver and housing made of pressure die-cast aluminum L518mm X W93mm X H163mm (Dimension Tolerance is ± 5mm). The luminaire shall be suitable for façade lighting applications. The luminaire housing shall be made of pressure die-cast aluminum with black/Gray/Stone color powder-coated finish and shall incorporate a dedicated heat sink for enhanced thermal performance and corrosion resistance. The luminaire shall be provided with a top visor and weatherproof silicon gasket between the optical cover and LED chamber to ensure proper IP66 ingress protection, The diffuser shall be made of high-quality polycarbonate diffuser cum lens . The luminaire shall have a Optional beam angle of 15°/30°/60°/90° (±10%) with precision optics. The luminaire shall have impact resistance IK08 The luminaire shall be equipped with high-performance Bridgelux / Seoul Semiconductor or equivalent LEDs capable of producing RGBW output, The fixture shall have a system wattage not exceeding 100W (±10%), with luminaire efficacy minimum 50 lm/W (±5%), power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.44A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC . The driver shall be integral type with protections against over-voltage, short circuit, and open circuit conditions, The luminaire shall have inbuilt surge protection of 4kV and external surge protection up to 10kV, The luminaire shall have an operating

temperature range of -10°C to +50°C, The optical assembly shall be securely sealed using silicon gasket to maintain ingress protection and long-term outdoor durability against dust, moisture, and sunlight. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours. The luminaire shall be of Class I electrical insulation, The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of linear-shaped architectural RGBW LED wall washer Eveready Make, Model No LEDLWRGBW018-B15/ Equivalent make with integral/external driver and housing made of aluminum extrusion, Dimension L1030mm X W48mm X H99mm Tolerance is ± 5mm. The luminaire housing shall be made of extruded aluminum with suitable surface treatment for durability and corrosion resistance. The luminaire shall be provided with a silicon gasket between optical cover and housing to ensure proper IP66 ingress protection. The optical cover shall be made of toughened glass , and the optics shall consist of high-quality PC lens . The luminaire shall have an asymmetric beam angle of 15°/30°/15° × 30°/15° × 60° (±10%) for effective wall washing applications. The nominal weight of the luminaire shall not exceed 2.34 kg (±10%) . The luminaire shall have impact resistance IK07, The luminaire shall be equipped with high-performance Seoul / Lattice Power or equivalent LEDs capable of producing RGBW output. The fixture shall have a system wattage not exceeding 18W (±10%) , with luminaire efficacy minimum 50 lm/W (±5%) , power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.078A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC. The driver shall be integral or

external type with protections against over-voltage, short circuit, and open circuit conditions. The luminaire shall have inbuilt surge protection up to 4kV and external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C. The luminaire shall be suitable for wall, ceiling, and floor mounting , and shall be supplied with adjustable mounting brackets for proper alignment and installation. The optical assembly shall be securely sealed to ensure long-term outdoor performance against dust, moisture, and environmental conditions. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours, The luminaire shall be of Class I electrical insulation. The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of linear-shaped architectural RGBW LED wall washer Eveready Make, Model no LPL0040LN0020002 / its Equivalent make with integral/external driver and housing made of aluminum extrusion, Dimension L1030mm X W65mm X H109mm Tolerance is ± 5mm. The luminaire housing shall be made of extruded aluminum with suitable surface treatment for durability and corrosion resistance. The luminaire shall be provided with a silicon gasket between optical cover and housing to ensure proper IP66 ingress protection. The optical cover shall be made of toughened glass , and the optics shall consist of high-quality PC lens . The luminaire shall have an asymmetric beam angle for effective wall washing applications. The nominal weight of the luminaire shall not exceed 2.5 kg (±10%) . The luminaire shall have impact resistance IK07, The luminaire shall be equipped with high-performance Seoul / Lattice Power or equivalent LEDs capable of producing RGBW output.

The fixture shall have a system wattage not exceeding 40W (±10%) , with luminaire efficacy minimum 50 lm/W (±5%) , power factor ≥0.9 and THD ≤15% at 240V. The maximum input current shall be 0.26A. The luminaire shall operate on 220–240V AC, 50Hz , with a safe operating voltage range of 140V–280V AC. The driver shall be integral or external type with protections against over-voltage, short circuit, and open circuit conditions. The luminaire shall have inbuilt surge protection up to 4kV and external surge protection up to 10kV, The luminaire shall have an operating temperature range of -10°C to +50°C. The luminaire shall be suitable for wall, ceiling, and floor mounting , and shall be supplied with adjustable mounting brackets for proper alignment and installation. The optical assembly shall be securely sealed to ensure long-term outdoor performance against dust, moisture, and environmental conditions. The luminaire shall be provided with suitable mounting arrangement (installation hardware such as nuts, bolts, and washers shall not be in supplier scope). The fixture shall have an integral DMX Decoder with UCS512 Chip & capability of standalone mode operation, The luminaire shall be automatically addressable using a hand-held addressing device. The luminaire shall give feedback on luminaire address and status (ON & OFF). The luminaire shall be capable of 8-bit control of Red, Green, Blue and White (W = 4000K) to produce 16.7 million colours, The luminaire shall be of Class I electrical insulation. The successful bidder shall submit the following documents for approval prior to supply: product data sheet, LM79 report from NABL-accredited laboratory, LM80 report of LEDs, photometric report (polar curve), and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of programmable DMX512 Model No 91009928/its Equivalent lighting controller for architectural façade lighting systems, capable of advanced control, scene management, and synchronization of RGB/RGBW luminaires. The controller shall be suitable for façade lighting applications. The controller shall be housed in a compact, durable body with approximate dimensions of 160 mm × 90 mm × 45 mm (±10%), suitable for panel mounting or desktop installation. The nominal weight of the unit shall not exceed 0.27 kg (±10%). The controller shall support DMX512 output protocol and shall be capable of controlling multiple luminaires with multi-zone functionality, extended triggering, and 16-bit channel control for smooth dimming and color transitions. The controller shall feature an intuitive backlit interface with 10 programmable preset buttons, along with dedicated buttons for scene selection and zone control to allow quick and easy operation. The controller shall support programmability via Windows, Mac OS, iOS, and Android platforms using compatible lighting control software. It shall be compatible with operating systems including Windows 8.1 (64-bit) onwards and Mac OS X 10.13 onwards . The controller shall include internal memory support via microSD (SD/SDHC up to 32GB) for storing lighting programs, scenes, and effects. The unit shall provide multiple connectivity options including Type-C USB, XLR3 (DMX output), Ethernet, and 20-pin (2×10) IDC connector, along with support for 2 TCP/IP connections. The controller shall also support remote operation via mobile applications over Ethernet/Wi-Fi network as optional and based on subscription. The controller shall operate on 5–5.5V DC input supply (0.6A). The controller shall have an operating temperature range of 0°C to +50°C and shall be suitable for indoor installation with IP20 protection rating. The controller shall comply with relevant standards such as ETL, EC, EMC, and RoHS. The controller shall enable seamless integration, reliable data transmission, and synchronized control of façade lighting fixtures across multiple zones.

Supply of programmable DMX Address Writer Model No 91010514/Equivalent (RGBW Addressing Device) for architectural façade lighting systems, suitable for writing addresses and configuring parameters of DMX-based luminaires. The address writer shall be housed in a compact and robust enclosure made of aluminium alloy, with approximate dimensions of 173 mm × 88 mm × 38.5 mm (±10%). The nominal weight of the unit shall not exceed 0.5 kg (±10%). The device shall support DMX and TTL protocols and shall function as a DMX encoder and addressing tool for configuring lighting fixtures. The unit shall have a single data output port supporting RS-485 / 5V TTL / 12V TTL signal output for compatibility with a wide range of DMX luminaires and pixel fixtures. The address writer shall support data input through SD card and shall be capable of handling up to 1920 channels per device. The device shall feature a user-friendly LCD display interface for easy operation and configuration. It shall support DMX console simulation function , allowing control of up to 18 channels simultaneously , along with multiple inbuilt test effects for fixture testing and commissioning. The device shall support 0–255 grayscale levels for precise control and addressing. The unit shall operate on multiple power input options including Micro USB (DC 5V, 2A), DC 12V–24V (1A) , The device shall have a power consumption not exceeding 10W. The address writer shall be suitable for indoor use with IP20 protection rating. The unit shall be designed for reliable operation during installation, testing, and commissioning of DMX lighting systems.

Supply of 8-channel DMX Booster/Splitter Model No. 6SCRDM8T000 for architectural façade lighting control systems, suitable for distribution and amplification of DMX512 signal for synchronized lighting. The DMX splitter shall be designed in a rack-mountable metal Body with approximate product dimensions of 485 mm (W) × 140 mm (L) × 50 mm (H) (±10%). The enclosure shall be robust, suitable for indoor control panel/rack installation, and ensure long-term reliability. The device shall have 1 DMX input (male XLR socket) and 8 isolated DMX outputs (female XLR sockets) to distribute signal efficiently. Each output channel shall be provided with individual status indicators (LED indicators) for monitoring signal presence and operation. The DMX splitter shall support data transmission up to 50 meters per output channel using 14/36 SWG signal wire or equivalent. The unit shall operate on 220V AC, 50Hz supply. The DMX splitter shall act as a signal booster and isolator , ensuring stable data transmission, minimizing signal loss, and protecting connected fixtures from signal interference or failure. The device shall be suitable for DMX512 lighting control systems and shall ensure seamless synchronization of multiple luminaires in façade lighting applications. The nominal weight of the unit shall not exceed 3.5 kg (±10%). The unit shall be designed for continuous operation in professional lighting environments and shall provide high reliability and performance stability. The DMX splitter shall be compatible with all standard DMX controllers and fixtures used in architectural lighting systems. The successful bidder shall submit the following documents for approval prior to supply: product data sheet and relevant compliance certificates including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply of a Male–Female XLR 3-pin connector Model No LPL0000LS0010050/ its Equivalent assembly complete with 1-meter length of 3-core wire, designed to ensure durable, safe and reliable DMX signal transmission for architectural and façade lighting systems. The connector assembly shall be constructed with high-quality insulation, secure terminal contacts and effective strain relief to prevent cable damage and ensure stable performance under continuous operation. The 3-core wire shall be compliant with relevant electrical and data-signal standards suitable for DMX512 applications. The unit shall meet applicable safety certifications and shall be fully compatible with standard electrical specifications used in professional lighting installations. The design shall prioritize user safety, easy installation, and long-term reliability, ensuring proper and interference-free DMX signal transfer across the connected lighting network including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

The scope of work shall include the complete supply, installation, DMX programming, testing, and commissioning of the architectural façade lighting system as per approved drawings, specifications, and design intent. The contractor shall supply all specified aterials including luminaires, drivers, DMX control systems, controllers, splitters, address writers, cables, conduits, junction boxes, connectors, mounting brackets, and all associated electrical and mechanical accessories required for proper installation and operation of the system. The contractor shall be responsible for complete installation in a professional and workmanlike manner, ensuring proper alignment of fixtures, secure fixing, accurate focusing, and aesthetically neat routing of cables. All works shall be executed carefully to ensure that the existing façade finishes and structural elements are not damaged during installation. All necessary accessories, fittings, consumables, and minor items required for successful completion of the project, whether specifically mentioned or not, shall be deemed to be included within the scope of work without any additional cost implications. The contractor shall carry out DMX addressing, programming, scene creation, and synchronization of all lighting fixtures to achieve the desired dynamic lighting effects as per approved design concept. The complete system shall be tested and commissioned to ensure reliable performance, proper communication between all components, and compliance with specified technical parameters. Upon completion, the contractor shall ensure that the entire installation is fully functional and operational in all respects. The contractor shall also submit necessary documentation including as-built drawings, programming details, and operation manuals, and hand over the system in complete working condition to the client/authority including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

The Contractor shall provide Comprehensive Operation & Maintenance for 5 years from the date of successful commissioning. With the fallowing due ProceeduresA. Preventive Maintenance – Quarterly1. Cleaning of all fixtures, lenses, and brackets2. Checking all connections, cable glands, waterproofing3. Testing DMX controller, scenes, timer, and software backup4. Tightening of all bolts, brackets, SS hardware5. Megger test of cables and Earth resistance test <5 Ohms6. Submission of PM report with photos to EE ElectricalB. Breakdown Maintenance – 24x48 Hrs1. Attend any fault complaint within 24 hours2. Rectify within 48 hours3. Replacement of failed LED driver, module, or controller at no extra cost during warranty/AMC4. Emergency call support on phoneC. Consumables CoveredAll spares including LED modules, drivers, fuses, MCB, DMX cards, cables up to 10m. Not Covered: Damage due to theft, vandalism, lightning without SPD, civil work including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.

Supply,delivery and fixing of Near Flag pole around the entrance In-Ground Luminaire-3000K-24°-Stainless Steel-240Vac-Toughened Clear Glass-9W-Ø116 x 153->90-3 Years Code: 24146-30-024-006-240-000-009-015-C90-003 69408 - IH-9W IG Mounting Sleeve including cost of material and conveyance to work spot etc complete as directed by the departmental authorities.