SPECIAL REPAIRS TO COOK HOUSES OF OFFICERS MESS,SNCOS MESS,AIRMENS MESS,DSCS MESS,AIRCREW ROOM , OTHER CAFETERIA AND SPECIAL REPAIRS TO TOILETS,SANITARY FITTINGS AND ROOF IN CERTAIN SMQ/OMQ (BLDG No.P-459) AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

Disconnecting existing tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as directed.

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description in parapets including racking out joints, hacking for key, scrubbing down with water etc.,complete removal of tarfelt from old surfaces, roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.,including brushing neat cement slurry with 3.0 kg of cement per sq. metre and including rendering 10 mm thick, cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) complete all as specified and directed.

Materials and Labour for providing waterproofing treatment over smooth finished surfaces by application of cold applied bituminous primer as per manufacturer's instructions, providing and laying 3.00 mm thick, plain finish, APP modified bitumenous waterproofing and damp proofing membrane with polyester reinforcement (Non-Woven Polyester Mat), conforming to IS 16532 :2017 (Dimensions and weight of APP membrane polyester as per Table 2 of IS), by forced (torch on) application, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction,complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each,complete all as directed.

Resecuring or easing and adjusting shutters of any description exc 1 sq. m and n exc 2 sq. m each without taking down,complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as directed.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

Materials and Labour for plain cement concrete (1:5:10) type E2 using 40 mm graded aggregate in filling of sunken floors, including demolition of existing cement concrete (un reinforced), complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges including demolition of existing cement concrete (un reinforced), complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for reinforced cement concrete (1:2:4) type B1 using 20 mm graded aggregate in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors),landings,deck slabs, shelves, canopies and similar suspended work,complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),including demolition of existing brickwork or stone/boulder masonry (Considering 0.115 Cum per Sq M), built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide,for fair finished surfaces of concrete, flat, complete all as specified and directed.

Materials and Labour for, second-class hard wood timber scantlings, clean sawn, in unframed works and in any position, fixed with nails including dismantling existing timber scantling in unframed work, 40 Sq cm and over in section, in any position,complete all as specified and directed.

Materials and Labour for, second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Materials and Labour for, 20 mm thick, second class hard wood boarding, planned on one side with butt joints, supplied & fixed with nails in any situation (except flooring and skirting), including dismantling of existing timber boarding, any description, fixed in any position with nails,complete all as specified and directed.

Supply and Fix, 35 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed.

Supply and Fix, 35 mm thick,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed.

Supply and Fix, 40 mm thick,flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ,complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Materials and Labour for,providing and fixing factory made uPVC white colour Sliding window Three track,area not exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, complete all as specified and directed. (Notes: (i) The unit rate quoted shall be excluding the cost of glass and shall be inclusive of all other connected accessories. (ii) Net Opening will be measured for payment purpose.)

Supply and Fix, factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass will be measured and paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 100 mm size, complete all as specified and directed.

Supply and Fix, mild steel barrel tower bolt, black Japan finished, with bright bolt 150 mm long, complete all as specified and directed.

Supply and Fix, mild steel barrel tower bolt, black Japan finished, with bright bolt 200 mm long, complete all as specified and directed.

Supply and Fix in repairs,mild steel pressed handles,150 mm size, oval type, black Japan finished,complete all as specified and directed.

Supply and Fix in repairs, mild steel sliding door bolts,length of bolt 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fix in repairs, mild steel sliding door bolts,length of bolt 300 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fix, mild steel, 300 mm, ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges,75 mm size,complete all as specified and directed

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix,hasp and staple,size 75 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and directed

Supply and Fix,double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed,complete all as specified and directed

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and Fix in repairs, Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets,stops, rollers etc.,complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work , complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work ,complete all as specified and directed.

Supply and Fix, expanded metal of weight not exceeding 4.00 Kg/SqM, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members,complete all as specified and directed.

Supply and Fix, expanded metal of weight exceeding 4.00 Kg/SqM, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members,complete all as specified and directed.

Materials and Labour for,pressed steel frames,size 105 x 60mm,made out of 1.25 mm thick mild steel sheets, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete, as specified,supplied and fixed,complete all as specified and directed.

Materials and Labour for,pressed steel frames,size 125 x 60mm,made out of 1.25 mm thick mild steel sheets, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete, as specified,supplied and fixed,complete all as specified and directed.

Materials and Labour for,providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge,complete all as specified and directed.

Taking down, aluminium shutters of any description exc. 1.00 Sq. M and n. exc. 2.00 Sq. M each including refixing in the same opening after necessary minor repairs such as alignment of members,tightening of screws in jointing cleats of members, easening of hinges/sliding rails etc.,complete all as specified and directed. Note:- Cost of minor materials such as screws,cleats,rubber packing etc. shall be deemed to be inclusive in the quoted rate.

Taking down, aluminium partition panels of any description including refixing in the same position after necessary minor repairs such as alignment of members,tightening of screws in jointing cleats of members etc.,complete all as specified and directed. Note:- Cost of minor materials such as screws,cleats,rubber packing etc. shall be deemed to be inclusive in the quoted rate.

Supply and Fix,anodised aluminium, window and ventilator frame with anodised aluminium sliding glazed shutters,without sash bars,including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading,locking arrangements,handles,screws etc. with and including 4mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Supply and Fix,anodised aluminium, door frame with anodised aluminium shutters,side hung type, without sash bars, with top rail, styles, lock rail and bottom rail, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.) suitable handle (2 No.), lock (01 No),screws etc.with and including 5.5 mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, including dismantling of existing asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed. Notes:- (i) The existing ridge, valley, cladding to wall and gutters etc. sheets are deemed to be dismantled along with the roofing sheets. (ii) Old unserviceable sheets will be sold to the Contractor under relevant item in Schedule of Credit.

Supply and Fix, 0.56 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valleygutter, drip and straight flashing (length and girth as fixed),complete all as specified and directed.

Materials and Labour for,25 mm thick,bonded mineral wool blanket/ slab made from glass, density 24 kg/cu m, including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets, any thickness,complete all as specified and directed.

Materials and Labour for,18/19 mm thick,veneered particle boards interior grade,solid core, general purposes type, with decorative veneer on both faces, fixed with screws to timber frame work,including dismantling existing boarding, any description, fixed in any position with screws, complete all as specified and directed.

Materials and Labour for,anodised aluminium snap grid frame work for false ceiling,size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Materials and Labour for,20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, economy class, Grade B IIa, in vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab 18-20 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick screed bed of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab 20-25 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick screed bed of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor, complete all as specified and directed.

Materials and Labour for 50 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement,including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.,and including brushing neat cement slurry with 3.0 kg of cement per sq. metre,complete all as specified and directed.

Materials and Labour for, bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight,10 mm wide and 50 mm depth as in joint filling for plinth protection,complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement including demolition of existing cement concrete (un reinforced) in ground floors and paving (Considering 0.075 CuM per Sq M),complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding,complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:3) on concrete surfaces in ceiling and finishing surface even and smooth without using extra cement including applying three coats of white wash after preparation of surface and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,including applying two coats of distemper oil emulsion over a coat of primer,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:3) mixed with waterproofing compound as per manufacturer's instructions on concrete surface of sunken floors and finishing surface even and smooth without using extra cement,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:6) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,including applying two coats of cement-based paint and including priming with alkali resistant priming paint,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on walls, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.

Material and Labour for preparing new surfaces plastered or unplastered, priming with alkaliresistant priming paint and applying two coats of distemper oil emulsion ,on wall, complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two coats of distemper oil emulsion after priming with alkaliresistant priming paint over and including 3 mm wall care putty,on wall, complete all as specified and directed.

Material and Labour for complete removal of existing treatment,and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including 3 mm wall care putty,on wall, complete all as specified and directed.

Material and Labour for preparing new surfaces plastered or unplastered and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,on walls, complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm ,on walls, complete all as specified and directed.

Material and Labour for, 3 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed.

Material and Labour for, 4.8 mm thick sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane,complete all as specified and directed.

Material and Labour for, 5.00 mm thick sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane,complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Supply and Fix in repairs,ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed,complete all as specified and directed.

Supply and Fixin repairs, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed

Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix, brass chromium plated tubular towel rail 20mm dia, 450 mm long, including brackets,complete all as specified and directed.

Supply and Fix in repairs,brass chromium plated shower rose 125mm size fixed to steel pipe or union 15 mm bore,complete all as specified and directed.

Supply and Fix,shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms),complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified and directed.

Supply and Fix, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed.

Supply and Fix in repairs, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs, vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix in repairs,PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

Supply and Fix, 75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls,complete all as specified and directed.

Supply and Fix, 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

Supply and Fix, 75 mm bore PVC (SWR) bends any radius,with access door,complete all as specified and directed.

Supply and Fix, 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal,with access door,complete all as specified and directed.

Supply and Fix, 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal,with access door,complete all as specified and directed.

Supply and Fix,110 mm bore PVC (SWR) reducers,complete all as specified and directed.

Supply and Fix,75 mm bore PVC (SWR) vent cowl,complete all as specified and directed.

Supply and Fix in repairs,PVC (SWR) floor trap, plain with grating,with diameter of outlet 75 mm, including jointing with solvent cement,complete all as specified and directed.

Supply and Fix in repairs,stainless steel round shaped grating,doom type, 100 mm size,with or without waste hole,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent,complete all as specified and directed.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent,complete all as specified and directed.

Supply and fix switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix,switch socket combination 2 in 1, 5A,flush type, complete all as specified and directed.

Supply and Fix,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and fix Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 2.5 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for sub main, complete all as specified and directed.

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 10 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ABB]

Supply and fix miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4085 87-4085 95 of Make Legrand or equivalent Model of Make L&T/Hager/Seimens/GE/Schneider/ABB]

Supply and fix miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 40 Amps complete all as specified and directed. [Cat No. 4086 18 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Cutting openings, through full brick walls built in cement mortar for fixing of exhaust fan, 450 mm sweep and other openings or enlarging existing openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring,removing rubbish not exceeding 50m and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and including finishing exposed surfaces as per adjoining finishes, complete all as specified and directed.

Supply and Fix, exhaust fan, steel body AC single Phase, 230V of size 450 mm sweep, heavy duty, with blades and frame and louvers complete all as specified and directed. [Cat No.'Turbo Force SP, 2 N 1400 r/min (RPM)' of Make Havells or equivalent Model of Make Crompton Greaves/ Almonard/Bajaj/Orient/Usha]

kabitaconstruction

M/S Kangkans

THE BUILDERS

M/S Annu Electronics

M/S R.B. Construction

M/S A K MITRA

SHRI D. C. BISWAS