REPAIR TO ROAD AND ROAD FURNITURE FOR CERTAIN PORTION OF VARIOUS ZONES FOR AGE B/R (P) UNDER GE(S) TEZPUR

Amount

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc

Applying evenly primary/tackcoat with cationic bitumen emulsion (RS-I) @ 2.50 kg/10sqm over black top surfaces.

M&L for premix bituminous macadam with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller etc, complete all as specified and directed. Notes:- The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through National Test House, SEMT wing CME, Regional Research Labs, IITs, National Institutes of Technology, Govt Engineering College or any Govt laboratories and the same shall be got approved from the GE before providing Bituminous Macadum. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.42 per Kg.

M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.50 % binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed. Notes:- The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through National Test House, SEMT wing CME, Regional Research Labs, IITs, National Institutes of Technology, Govt Engineering College or any Govt laboratories and the same shall be got approved from the GE before providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.42 per Kg . (iii) The thickeness of SDAC indicated above is the minimum thickness, Further, it is clarified that no payment for the addl. thickness in case required to be provided to achieve the desired levels, slope & making good the undulations etc, all as directed by the GE, shall be made.

M & L for thermoplastic road marking paint, white or golden yellow, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions, using thermoplastic application unit etc, complete all as specified & directed.

Supply & Fix of standard delineator (Red, Yelow & White colour combination or of any other colour combination as directed) superior product design with Type XI DG 3 reflective sheeting uniquely designed ellipsoidal body, diamond grade reflective sheeting on both sides of the delineator, 3.5 feet height provided ;at site as per manufacturer’s instructions embedded in and including PCC (1:3:6) type C-2 in ground of size 30cm x 30cm x 30cm block, also including excavation of hole and removing excavated material from site and including taking down of old one, complete all as specified and directed

Supply & Fix of solar powered environment frinendly, LED based road stud made of aluminium alloy shell, 100% waterproof design according to IP 65 of dimension 125mm x 125mm x 25mm (Shank 60mm), high efficiency monocrystalline solar panel 2.4V/0.3 watt, one Ni Mh or NL-cd rechargeable battery (1.2/1600MA), six super bright LEDs with 10,000 to 18,000 mcd9 millicandela, View distance : up- to 1000 meters, flash rate : 2Hz, bearable weight : 10 tons approx, working time for 3 to 4 days, provided at site as per manufacturer's instructions

Supply & Fix for reflective polycarbonate (Road Stud) of ABS confirming to INC code 67-3977 having load bearing capacity of 13.5 tonne (point load) of approx size 100 x 90 x 18mm high with reflectors on both sides, on road surfaces with and including epoxy/approved adhesive all as per manufacturer’s instructions complete including taking down old one all as specified and directed

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

M/S K.K.TRADERS

M/S SHYAMAL SARMAH