REPAIRING WORKS OF ANGANWADI AT (1) SUNSAR CN-146, (2)MERVADA CN-125, (3) LANVA CN-76, TA. CHANASMA, DIST. PATAN.

BILL OF QUANTITIES / QUANTITY STATEMENT

It. Item Of Work Quantity Unit Rate Amount

1 Removing and scraping of old deteriorated 537.340 Sq.mt 20.8400

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from site

of work with all lead and lift

2 Dismentaling the existing structure including 15.098 Cum 974.660

removing and stacking the dismentelled materials

as and where directed. (A) R.C.C. work

3 Providing and laying cement concrete 1:4:8 (1- 0.090 Cum 2660.310

Cement : 4- coarse sand : 8- hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

4 Brick work using common burnt clay building 0.270 Cum 3708.980

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional (upto 10 ton)

5 Brick work using common burnt clay building 10.820 Cum 4004.120

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional. Above Plint level Upto Floor Two

6 Providing 15mm thick cement plaster in single 654.550 Sq.mt 168.8700

coat on Rough (Similar)side of single or half brick

walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

7 Providing and laying ordinary cement concrete 4.795 Cum 8593.800

1:2:4 (1-Cement 2- coarse sand : 4- graded stone

aggregates 20mm nominal size) and finishing

smooth with,curing etc.complete including the

cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS:(i)

Having cross-sectional area 0.05 to

8 Providing and laying white glazed tiles 6mm thick 0.000 Cum 0.000

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement

: 3-coarse sand ) finishing with flush pointing in

9 P & L 24" x 24" vitrified 8 mm thick tile flooring 0.000 Sq.mt 0.0000

over 20 mm (average) base of cement mortar 1:6

( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete for light shade

10 Wall painting (two coats) with plastic emulsion 654.550 Sq.mt 88.3800

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.. [21 18.57]

11 Painting two coats (excluding priming coat) on 4.860 Sq.mt 96.590

new steel and other metal surfaces with enamel

paint brusing, interior to give enamel paint

brusing, interior to give an even shade including

clraning the surface of all dift, dust and other

foreign matter. (R&B S.O.R 2024-25, CH-19, Code

12 Providing and fixing 35 mm thick shutters for 3.240 Sq.mt 4101.060

Doors, windows and clear story windows

including anodised alluminium butt hinges with

necessary screws.(A) Indian Teak Wood (1) Fully

13 Providing and Laying ordinary cement concrete 15.270 Cum 6888.150

1:2:4 (1- Cement 2- coarse sand : 4- graded stone

aggregates 20 mm nominal size) and finishing

smooth with curing etc. complete including the

cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness (SOR

14 Providing TMT Bar FE 500D reinforcement for 1080.000 Kgs 77.280

R.C.C. work including bending, binding and

placing in position complete upto floor two level

15 Providing and laying broken chine mosaic flooring 28.350 Sq.mt 779.700

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3

to plain or slope and to be tempered to bring

mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

16 Providing and fixing 20cm. x 15cm x 2.5 cm. thick 3.000 Nos. 279.690

year plate of marble stone set in C.M. 1:4

including finishing and engraving letters etc.

I/We am/are willing to carry out the work at…% above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Rs............... Estimated amount put to tender Rs...............

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R & B Division Panchayat R & B Sub Division

Notes 1 - The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

Notes 2 - The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Notes 3 - GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4 - In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.