Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8.0 L
EMD Value
₹8,048
Closing Date
3 Dec 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, MechanicalDivision,Kataka
OFFICE OF THE SUPERINTENDING ENGINEER, MECHANICAL DIVISION, JAGATPUR, KATAKA
Fabrication, supply, transportation and erection sluice gate of VELONG SLUICE , Binjharpur Block Under Drainage Division, Jajpur for the year 2026 27.
2026_CEMWR_146693_1
SE/MDC-11(2)/2026-27
Open Tender
Mechanical Works
Percentage
25 days
Binjharpur Block
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,000
₹8,048
Yes
19 Nov 2026
19 Nov 2026
4 Dec 2026
19 Nov 2026
3 Dec 2026
19 Nov 2026
19 Nov 2026 - 3 Dec 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570) consisting for 5 Nos. of fall board Sluice gate of Size-1450mm x 1600mm (400mm x 4) in each vent for total 8 nos of vent and operating platform as per specification with all accessories as per instruction of Engineer-in-charge. | 8 | set | 59,300.38 | ₹4,74,403.02 |
| 2 | Supply of following bought out materials for 4 Nos. of Sluice gate each for 8 nos of vent combine - Bolts, screw, nuts, washers etc- 104 Kg, Bottom Rubber Seal(10mm thick)- 46.08 Mtr.,SIDE SEAL Ø 32mm x10mm th- 80mm width Rubber seal-25.6 mtr,ss flats-58mtr , Lifting & locking arrangement- 32 nos.,anchor bars-64 nos etc. | 8 | set | 14,517.99 | ₹1,16,143.96 |
| 3 | Erection, positioning, alligning, fixing, trial, commissioning, testing etc. of fall board Sluice gate consisting of skin plate, horizontal girder,end vertical girder, seal clamp plate,side seal clamp plate, seal flats fixing of anchor bolts and operating platform etc as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, all complete as per instruction of Engineer-in-charge. | 8 | set | 12,754.01 | ₹1,02,032.08 |
| 4 | Painting of 2nd stage embedded parts (exposed portion), gate, and its components in both upstream side and downstream side, including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each for 8 Nos. of vent all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. | 8 | set | 3,908.35 | ₹31,266.77 |
| 5 | Providing reinforced cement concrete grade M-20 of approximately 1.3556cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per specification with all leads, lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction/erection and removal of gangways, staging’s, scaffoldings & incidental charges complete for 8 Nos. of vent as per the direction of the Engineer in-Charge. | 1.36 | cum | 6,778 | ₹9,188.25 |
| 6 | Extra Item includes coffer dam,dewatering,vent cleaning, Watch and ward etc all complete as per instruction of Engineer-in-charge. | 1 | set | 52,222.48 | ₹52,222.48 |
| 7 | Transportation charges of above said half finished materials from workshop, generator ,welding transformer, derrick & other T & P with labour charges for loading and unloading in a 10T truk about Transportation worksite to & fro of around. | 2 | trip | 6,073.08 | ₹12,146.16 |
| 8 | Concrete cutting of approximately 1.3556cum as per specification with all leads, lifts,including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including hire and running charges of all machinery / equipments, construction/ erection and removal of gangways, stagings, scaffoldings & incidental charges complete for 8 Nos. of vent as per the direction of the Engineer in-Charge. | 1.36 | cum | 5,428.84 | ₹7,359.34 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
DTCN.pdf
Tender Documents • 1.20 MB
BOQ_622100.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .