CERTAIN MISC B/R WORK SERVICES IN TECH AREA UNDER AGE B/R I AT AF STN JODHPUR

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes and removal of debris outside MD land complete all as specified & directed.

Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified & directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortar complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed.

Dismantling boarding, any description, fixed any position with nails complete all as specified & directed.

Dismantling of old unserviceable, rusted, broken (corrugated/semi corrugated, etc.) CGI/AC/ Fibre glass sheets in ridge and roof coverings complete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified & directed.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified & directed.

S&F rubber moulded Machine pressed PCC interlocking paver block confirming to IS 15658-2006 of size 80 mm thickness M-40 Grade with grey cement and pigment laid dry over 25mm thick screed river washed sand cushion as in floor, shape and colour complete all as specified & directed.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mm x 300mm as in parking etc including 15 mm thick screed bed in CM 1:4, set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm stone aggregate as in sub base floor/floors and paving etc complete all as specified & directed.

S&F rubber moulded chequered cement concrete tiles 25 mm thick of any size, colour and pattern as approved by GE set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 with grey cement and pigments complete all as specified & directed.

M&L for pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified & directed.

M&L for preparation of new untreated concrete surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over and including a coat of primer all as specified and as directed by Engineer-in-Charge.

S&F in reapirs anodised aluminium snap grid frame work (600mm X 600 mm) for false ceiling complete all as specified & directed.

S&F 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid for exposed metal frame ceiling complete all as specified & directed. (Note :- Frame work for ceiling shall be measured and paid separately.)

M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge.

M&L for solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed.

Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm screed bed in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge.

M&L for rounding/chamfering to edge of stone slab like granite, marble, kota stone etc to required shape & design including grinding & polishing to obtain required finish complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) Quality-B complete complete all as specified & directed.

Supply & fix pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and inluding a coat of red oxide primer complete all as specified & directed.

M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified & directed.

M&L for sand stone jalli of 40mm thick in any size and in side shape with asthetic view and pattern approved by GE including pillars/ frames/ posts (thumbly) complete all as specified and directed by Engineerin-Charge. Note : Measurement shall be carried out including frame/ posts/ frames.

M&L for stone slab 25 mm to 30 mm thick dressed true and square, in one length not less than 60 cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edged rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats exterior weather proof water base emulsion paint over and inluding a coat of primer complete all as specified & directed.

M/S KAUTILYA GARG (BID ID -3300127)

VIKAS CONSTRUCTION CO. (BID ID -3300053)

Savitri Enterprises (BID ID -3299535)

M/s RKG CONSTRUCTIONS (BID ID -3300114)

Om Trading Corporation (BID ID -3300200)

KALWA TRANSPORTER AND SUPPLIERS (BID ID -3297235)