Refurbishment of Electricals i.e Electrical modular wiring, LED lights, Fans, electrical modular accessories etc. of VIP Guest House of Rajrappa Area

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A- Cost for 1 point

Group B- Cost for 1 point

Group C- Cost for 1 point

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

2 x 4 sq. mm + 1 x 4 sq. mm earth wire

Supplying and fixing metal box of following sizes(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required

100 mm x 100mm x 60mm deep

150mm x 75mm x 60mm deep

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 Amp switch

3 pin 5/6 Amps socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required

1 or 2 module(75mm x 75mm)

6 module(200mm x 75mm)

8 module(125mm x 125mm)

12 module( 200mm x 150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 amps & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/wooden block including connection etc as required

Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connections etc. as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FRLS PVC insulated, copper conductor, single core cable etc as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 amps modular SP MCB, "C" curve including connection, painting etc. as required

Supplying and fixing PVC batten/angle holder including connection etc. as required

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way(4+12), Double door

Supplying and fixing 5amps to 32 amps rating, 240/415 volts, 10KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Double pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

Supply and erection of LED pannel light 12W, 230V of rees mounted, round fixture in white finish with opad diffuser and separate electronic driver with connection and testing etc as required

Supply and erection of LED pannel light 15W, 230V of rees mounted, round fixture in white finish with opad diffuser and separate electronic driver with connection and testing etc as required

Supply and erection of LED surface light 12W, 230V, round shape with durable housing, AL heat sink and diffusor to give glare light with removal electronic driver with connection and testing as required(for porteco)

Supply and erection of LED surface light 18W, 230V, round shape with durable housing, AL heat sink and diffusor to give glare light with removal electronic driver with connection and testing as required(for porteco)

Supply a single decorative wall mounted light fitting with apal glass diffusor suitable for 1x9W/7.5W filament lamp

Supply a double decorative wall mounted light fitting with apal glass diffusor suitable for 2x9W/7.5W filament lamp

Supply of 7.5W, 230V filament type LED lamp

Supply of 10W, 230V LED bulb

Supply and fixing of 20W, 230V LED tubelight with connection

Supply and fixing of 6 module bell indicator for call

Supply and fixing of wall fan 400mm 230V with connection and testing etc as required

Supply of 1200mm , 230V ceiling fan

Supply and fixing of 18 module GI modular box with modular base and cover plate

Total impact of GST for the purpose of CTC

Coalfield Construction

RK CONSTRUCTION CHITARPUR