GE AF/AMB-T-18/2023-24 REPAIR TO PATH, HARD STANDING, DRAINS, BOUNDARY WALL, FENCING ETC IN DOMESTIC AREA AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed

M&L for PCC 1:3:6, type C2, (using 40 mm graded stone aggregates) as in surface channels and drains, complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8, type D-2, (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 5.00 here-in-above but except bricks complete all as specified and directed.

M&L for PCC 1:2:4, type B0, (using 12.5 mm graded crushed stone aggregates) as in coping including necessary form work complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L extra for forming fair finish drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed.

M&L for formwork to faces of side walls of drains and similar work, fair finished complete all as specified and directed.

Dismantling post or strut embeded in concrete( wood/steel/RCC) any section embeded in concrete including taking out embeded portion and making good complete all as specified and directed.

Dismantling fencing wire mesh of any description complete all as specified and directed.

Supply only galvanised chain link fencing 3.40 mm dia & 100x100 mesh including line wires weight not exceeding 4.00 Kg/Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed

S&F mild steel as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S & F mild steel screrw bolt 10 mm dia (Machine made) with hexagonal or square heads at one end and screwed other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut not exceeding 5 cm long complete all as specified and directed

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed .

Preparation of new or previous untreated surfaces of steel and iron of any description n exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for mild steel Round Bars bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to FE-410-W complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C1, (using 40 mm graded crushed stone aggregates ) as in Hard standing, PCC path and similar works complete all as specified and directed .

Material and labour for 75 mm thick plain cement concrete 1:4:8, type D-2, (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed

Forming contraction (dummy) joints 65mm deepx10mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block rubber finish any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick, complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed .

M & L for chequred tiles 300 x 300 x 25 mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete all as specified and directed .

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar, complete all as specified and directed.

M & L for rough cast plaster with and including 15 mm thick rendering in cement mortor 1:3 on brick wall or concrete surfaces as specified in clause 14.22 of SSR Part -I complete all as specified and as directed. Note: (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state , the rough cast mixture consisting of crushed stone or fine gravel aggregate(which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.

Preparation of newly plastered surfaces of wall & applying three coat of white wash complete all as specified and directed.

Shiv Construction Co.

Swami Enterprises

M/S JAISANT CONSTRUCTION CO.

ANIL CONSTRUCTION CO.

Durga Enterprises