TESING&CALIB-MECH EQUIPMENT

CALIBRATION OF PRESSURE — 1. THE CALIBRATION OF PRESSURE GAUGES SUCH DEVICES AND INSTRUMENTS AND ALSO REPAIR (IF NECESSARY) SHALL BE DONE ONLY BY THE NABL ACCREDITED LABORATORY, FOR ACCURATE MEASUREMENT AND RELIABILITY OF THE MEASURING DEVICES AND INSTRUMENTS.2. THE PARTY TO WHOM THE ORDER IS PLACED, WILL BE COMPLETELY RESPONSIBLE FOR THE ACCURATE MEASUREMENT AND OPTIMUM PERFORMANCE OF THE PRESSURE GAUGES AND OTHER MEASURING DEVICES AND INSTRUMENTS CONFORMING TO VARIOUS MEASUREMENT AND PERFORMANCE PARAMETERS AND ALSO IT SHOULD TAKE THE RESPONSIBILITY TO AVOID ANY UNNECESSARY DOWNTIME OR DELAY IN ATTENDING THE INSTRUMENTS FOR CALIBRATION OR REPAIR.3. THE CALIBRATION OF THE PRESSURE GAUGES, VACUUM GAUGES AND TEMPERATURE GAUGES HAS TO BE DONE ON - SITE AND ALL THE SUITABLE ARRANGEMENT REQUIRED FOR THE SAME HAS TO BE DONE BY THE PARTY.4. OTHER MEASURING DEVICES AND INSTRUMENTS WHICH CANNOT BE CALIBRATED/REPAIRED ON-SITE, HAVE TO BE RETURNED BACK AFTER CALIBRATION/REPAIR WITHIN 3 DAYS' TIME FROM THE DAY OF ISSUE FROM THE PLANT.5. NECESSARY SKILLED SERVICE EXPERTISE ALONG WITH THE TOOLS AND EQUIPMENTS REQUIRED FOR CARRYING OUT THE CALIBRATION AND REPAIR AT THE SITE/OFF-SITE, HAS TO BE PROVIDED BY THE CONCERNED PARTY.6. THE PARTY IS ALSO RESPONSIBLE FOR PROVIDING/ARRANGING FOR THE TIMELY AND CORRECT SUPPLY OF GOOD QUALITY, STANDARD MAKE AND DESIGN PRESSURE GAUGES AND OTHER MEASURING DEVICES AND INSTRUMENTS, IF REQUIRED/ASKED FOR. THE COST OF THE NEW SUPPLIES IS BEYOND THE PURVIEW OF THE ORDER BUT THE PARTY CANNOT CHARGE FOR THE SERVICE TO ASSIST US IN PROCURING THE SAME AT THE EARLIEST AS DECIDED BY HPCL.7. THE CONCERNED HPCL OFFICIAL WILL BE THE FINAL DECIDING AUTHORITY AS TO THE EXTENT OF THE WORK REQUIRED ON THE DEVICES AND INSTRUMENTS AND ALSO ON WHAT ALL AND FROM WHERE ARE THE NEW SUPPLIES BEING PROCURED.8. THE PAYMENT WILL BE DONE ONLY WHEN THE BILL IS SUBMITTED ALONG WITH THE CALIBRATION REPORT, NABL CERTIFICATE, TRACEABILITY DOCUMENTS AND THE TABULAR CHART (CONTAINING THE DETAILS OF THE DEVICES AND INSTRUMENTS LIKE THE MAKE, RANGE, TYPE, SIZE, LOCATION AND REMARKS) IN A WELL-DOCUMENTED MANNER.9. HPCL RESERVES THE RIGHT TO DEDUCT A SUITABLE AMOUNT DECIDED BY THE CONCERNED OFFICER FROM THE BILL SUBMITTED BY THE PARTY; IF THE PARTY DOES NOT COMPLETE THE JOB WITHIN THE DELIVERY PERIOD OR IT DOES NOT COMPLETE THE JOB FOR ALL THE INSTRUMENTS IN ALL THE RESPECTS AS DESIRED I.E. CALIBRATION ALONG WITH REPAIR AND SUPPLY (IF ASKED FOR).

CALIBRATION OF VACUUM — CALIBRATION OF VACUUM GAUGE WITH THE RANGE: 0.5 TO 10 MM, ACCURACY: 0.1 MM, STANDARD: ASTM D1160.

CALIBRATION OF PRESSURE — CALIBRATION OF PRESSURE SWITCH.

CALIBRATION OF PRESSURE — CALIBRATION OF PRESSURE TRANSMITTER.

CALIBRATION OF TEMP — CALIBRATION OF TEMPERATURE GAUGE.

CAL OF TEMP SWITCH 0-200 — CALIBRATION OF TEMPERRATURE SWITCH OF RANGE 0-200 DEGC.

CALIBRATION OF TEMP — WINDING TEMPERATURE INDICATOR AND OIL TEMPERATURE INDICATOR CALIBRATION FOR TRANSFORMER.

TESTING OF 4 PORT SRV — 1.SRV OF DIFFERENT SIZE SHALL BE DISMANTLED, THE SAME WILL BE CALIBRATED AT SITE BY EIC BY POPPING OFF AND CHECKING OF SET/RESET PRESSURE, ADJUSTING IF NECESSARY. 2.CALIBRATION TO BE DONE BY PESO APPROVED AGENCY ARRANGED BY THE CONTRACTOR AND REFITTED IN ORIGINAL POSITION. 3.COMPLETE HANDLING OF SRV INCLUDING DISMANTLING, TRANSPORTING AND REFITTED IN ORIGINAL POSITION WILL BE IN THE SCOPE OF THE CONTRACTOR. 4. ALL FITTINGS USED IN THE JIG FOR SRV TEST SHALL BE APPROVED AND AS PER STANDARDS. 5. ALL TOOLS/TACKLES, EXPERTISE AND EQUIPMENT’S TO BE ARRANGED BY THE INSPECTING AGENCY ENGAGED FOR THE JOB ALL OTHER TERMS AND CONDITION WILL BE INCLUDE INTO ORDER ATTACHMENT.

CALIBRATION OF TSV — CALIBRATION OF SAFETY RELIEF VALVE.

TSTG & CALIB OF TORQUE — TESTING AND CALIBRATION OF TORQUE WRENCH.