REPAIR TO DRAINAGE COMPOUND WALLS FENCING APPROACH PATH AND PLINTH PROTECTION IN K L AND M AREA AND PRUNING AND CLEANING OF ROOF TOPS IN K AREA MES ESTABLISHMENT UNDER GE NW KOCHI

Demolition of pre-cast cement conrete block masonary built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, Type C1, 1:3:6 (using 20mm graded stone aggregate) complete all as specified and as directed.

Taking down cement plaster on brick/concrete wall and ceiling surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment on external surfaces of wall complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation of old external surfaces of wall and applying one coats of Premium acrylic emulsion paint, Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and as directed.

M&L preperation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of cement base paint complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete, sub base or leveling course of floor etc. complete all as specified and directed.

M&L for PCC 1:3:6 Type C1 (using 20 mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete ( 1:3:6 ) Type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work complete all as specified and as directed. (Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.)

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Dismantling fencing wire mesh, any type including mild steel deformed bars in any size complete all as specified and as directed.

Dismantling post or sturt (wood, steel or RCC any section) including taking out embated portion in concrete, brick work etc complete all as specified and as directed.

M&L for excavation in post hole soft/loose soil(or similar holes) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good sruface complete all as specified and directed.

S&F MS post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. Flat iron fillets(for securing wire mesh etc) including all necessary drilling bolting or rivetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for cement concrete in post holes foundation fillings and mass concreting PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) complete all as specified and as directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. (Note: Each line wire shall be measured seperately).

Supply only MS galvanised chain link fencing of grid size 50x50x3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

M&L for mild steel round bars 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for as in line wire for straining fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete qulity A complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for welding in repair exc 2.5cm but n.exc 5cm in length of welding and n.exc 6mm thickness of metal including cleaning and preparing the steel surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of appropriate primer complete all as specified and directed.

M&L for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and directed.

Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specified and directed.

M&L for coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers complete all as specified and directed.

Dismantling stone slabs laid dry or laid dry and pointed and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for mild steel TMT bars 5mm to 10mm dia cut to length, bent to shap required including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in drain cover slabs and similar articles with plain faces and setting in cement mortar 1:4 with joints to match complete including necessary form work complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut polished granite 1st quality Granite (of any type) work (table rubbed and polished) for wall lining and Gate pillars (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

S&F in repair 32 mm bore PVC waste pipe for wash hand basin/kitchen sink complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and directed.

M&L in repair for 600mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Cleaning of vegetation growth over MP tiles roof RCC roof, chajja etc at any height of the building complete all as specified and as directed.

Removal of bushes from any height of the buildings inluding filling of the any weed chemical for prevention of further growth and making good to existing surface complete all as specified and directed.

Pruning of tree branches hanging over the roof of any height of the tree or building including necessary arrangement, safety precaution, removing and cleaning the branches form defence land complete all as specified and directed.

Pumping out sewage water and removing of sludge from the septic tank / soakage well at different locations by means of sewage tanker fitted with pump (tank of 5000 ltr capacity) and disposing off out of MD land complete all as specified and directed. Note:- (For ser item No.1 to 47 above) (i) Contractor's supervisor has to collect complaint slip from AGE B/R-I office on all working days. The complaints has to be attended and submit the slip duly signed by the user on the same day by 1700 Hrs to the Office. (ii) If the contractor fail to attend the complaint, recovery @ Rs. 500 per day per complaint shall be deducted from the amount due to the contractor. (iii) If there is any major blockage in sewage line/Septic tank or any emergency situation immediate service has to be provided by the Contractor even in holidays without any extra cost.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Please Enable Macros to View BoQ information