Construction of Mediatation Hall at Kurtan Mulbekh and (NBF). (Under Capex)

Part-A- Meditation Hall

Earth work in excavation by mechanical means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of soil.

Providing and laying of dry stone soling of specified thickness, including pitching, cost of stones, complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Crushed Stones.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand). Quarry stone.

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: slab Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide

Providing & fixing upto floor five level precast sundried mud bricks in mud mortar using approved quality mud with carriage of material complete.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size for thermal wall with water filled bottles fitted inside.. Crushed.

Providing and laying of Saw dust Insulation in Cavity walls Including, carriage, Labour all Complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 35mm thick.

Providing and fixing panelled or panelled and insulated shutters for doors, including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws al! complete as per direction of engineer- in charge including all accessories of approved quality. Second kail wood . For Door.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 30mm thick.

Providing and fixing Wooden frames in shutters for , windows and clerestory windows using double glazing unit (5mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinges bright finished of required size with necessary screws, all accessories and silicon sealant class Kail wood. For windows.

Providing and fixing Single glass panes with silicon sealant and glazing clips in windows, clerestory windows, all complete with all accessories: 5mm thick glass panes.

Linseed oil polishing with Two or more coats on new works including a coat of wood filler.

20mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying of stabilized mud plaster 15mm thick with 5% cement content on wall surface including labour and complete job.

Providing and applying of ferro cement plaster 15mm thick in 1:4 (cement :fine sand) mix with chicken mesh reinforcement on wall surface including labour and complete job.

Providing and applying of clay based paint of specified composition, including cost of material, labour complete.

Providing and fixing of 4" wide panelling tounged and grooved including necessary screws and cornice with 12mm thick plywood backing, including polishing complete job.

Painting with ready mixed matte paint of approved brand and manufacture in all shades to give an even shade. On wall surface.

Providing and laying of strawclay blocks for insulation in flooring including packing up with 10mm aggregates, complete.

Providing and laying of geo mesh fabric in outer cavity walls.

Providing and laying of frames for wooden flooring including necessary screws, labour and complete. Budloo wood.

Supplying and filling in plinthwith sand under floors, including watering, ramming, consolidating and dressing complete.

Wooden planking 1.5" thick, in flooring on top of frames including fixing with iron screws complete: Budloo wood.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing of wooden planks 1" thickness on top of overhangs with 2"x4" traditionlally carved wooden members along the edges and mud mat sloped of required thickness, complete.

part-B -Reception

Earth work in excavation by mechanical means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of soil.

Providing and laying of dry stone soling of specified thickness, including pitching, cost of stones, complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size). Crushed Stones.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand). Quarry stone.

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: slab Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide

Providing and laying of sunderied brick masonry laid in mud mortar including hoisting, placing in position, carriage, labour, complete.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size for thermal wall with water filled bottles fitted inside. Crushed.

Providing and laying of Saw dust Insulation in Cavity walls Including, carriage, Labour all Complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 35mm thick.

Providing and fixing panelled or panelled and insulated shutters for doors, including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws al! complete as per direction of engineer- in charge including all accessories of approved quality. Second kail wood . For Door.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 30mm thick.

Providing and fixing Wooden frames in shutters for , windows and clerestory windows using double glazing unit (5mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinges bright finished of required size with necessary screws, all accessories and silicon sealant class Kail wood. For windows.

Providing and fixing Single glass panes with silicon sealant and glazing clips in windows, clerestory windows, all complete with all accessories: 5mm thick glass panes.

Linseed oil polishing with Two or more coats on new works including a coat of wood filler.

20mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying of stabilized mud plaster 15mm thick with 5% cement content on wall surface including labour and complete job.

Providing and applying of ferro cement plaster 15mm thick in 1:4 (cement :fine sand) mix with chicken mesh reinforcement on wall surface including labour and complete job.

Providing and applying of clay based paint of specified composition, including cost of material, labour complete.

Providing and fixing of 4" wide panelling tounged and grooved including necessary screws and cornice with 12mm thick plywood backing, including polishing complete job.

Painting with ready mixed matte paint of approved brand and manufacture in all shades to give an even shade. On wall surface.

Providing and laying of strawclay blocks for insulation in flooring including packing up with 10mm aggregates, complete.

Providing and laying of geo mesh fabric in outer cavity walls.

Providing and laying of frames for wooden flooring including necessary screws, labour and complete. Budloo wood.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Wooden planking 1.5" thick, in flooring on top of frames including fixing with iron screws complete: Budloo wood.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing of wooden planks 1" thickness on top of overhangs with 2"x4" traditionlally carved wooden members along the edges and mud mat sloped of required thickness, complete.

Part-C-Kitchen& Dining Hall

Earth work in excavation by mechanical means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of soil.

Providing and laying of dry stone soling of specified thickness, including pitching, cost of stones, complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size). Crushed Stones.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand). Quarry stone.

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: slab Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide

Providing and laying of sunderied brick masonry laid in mud mortar including hoisting, placing in position, carriage, labour, complete.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size for thermal wall with water filled bottles fitted inside. Crushed.

Providing and laying of Saw dust Insulation in Cavity walls Including, carriage, Labour all Complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 35mm thick.

Providing and fixing panelled or panelled and insulated shutters for doors, including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws al! complete as per direction of engineer- in charge including all accessories of approved quality. Second kail wood . For Door.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 30mm thick.

Providing and fixing Wooden frames in shutters for , windows and clerestory windows using double glazing unit (5mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinges bright finished of required size with necessary screws, all accessories and silicon sealant class Kail wood. For windows.

Providing and fixing Single glass panes with silicon sealant and glazing clips in windows, clerestory windows, all complete with all accessories: 5mm thick glass panes.

Linseed oil polishing with Two or more coats on new works including a coat of wood filler.

20mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying of stabilized mud plaster 15mm thick with 5% cement content on wall surface including labour and complete job.

Providing and applying of ferro cement plaster 15mm thick in 1:4 (cement :fine sand) mix with chicken mesh reinforcement on wall surface including labour and complete job.

Providing and applying of clay based paint of specified composition, including cost of material, labour complete.

Providing and fixing of 4" wide panelling tounged and grooved including necessary screws and cornice with 12mm thick plywood backing, including polishing complete job.

Painting with ready mixed matte paint of approved brand and manufacture in all shades to give an even shade. On wall surface.

Providing and laying of strawclay blocks for insulation in flooring including packing up with 10mm aggregates, complete.

Providing and laying of geo mesh fabric in outer cavity walls.

Providing and laying of frames for wooden flooring including necessary screws, labour and complete. Budloo wood.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Wooden planking 1.5" thick, in flooring on top of frames including fixing with iron screws complete: Budloo wood.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing of wooden planks 1" thickness on top of overhangs with 2"x4" traditionlally carved wooden members along the edges and mud mat sloped of required thickness, complete.

Part-D Sanitary Fitting.

Earthwork in excavation by mechanical means (Hydraulicexcavator)over areas (exceeding 30cm in depth, 1.5m in width as well as10sqm onplan) including getting out and disposal of excavated earth lead upto 50m and lift upto1.5m,as directed by Engineer-in-charge.

Dumping stone excluding cost of stones. in Horizontal on level

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources8 graded stone aggregate 40 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling upwith cement concrete 1:6:12 (1cement : 6coarsesand :12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid without bond stone

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100mm sand cast Iron Por S trap,10 litre low level whiteP.V.C. flushing cistern with manually controlled device(handle lever)conforming to IS:7231,with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

Providing and fixing Stainless Steel AISI304(18/8)kitchen sink as per IS13983 with C.I. Brackets and stainlesss teel plug 40mm including painting off ittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250mm.

Providing and fixing wash basin with C.I.brackets, 15mmC.P. Brass pillar taps,32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

Providing and fixing P.V.C waste pipe for sink or wash basin including PVC waste fittings complete: flexible pipe 32mm dia

Providing and fixing P.V.C waste pipe for sink or wash basin including PVC waste fittings complete: flexible pipe 40mm dia

Providing and fixing soil, waste and vent pipes : PVC 100 mm dia.

Providing and fixing soil, waste and vent pipes : PVC 75 mm dia.

Providing and fixing Floor trap

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet.

Cutting chases in brick masonry walls for following diameter sand cast iron I centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 coarse sand):100 mm dia.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) (Internalwork exposed on wall) PN-16 Pipe, 25 mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C trenching, refilling and testing of joints complete as per direction of Engineer-incharge. (External work) PN - 16 Pipe, 32 mm OD (SDR-7.4)

Providing and fixing of material for the insulation of pipe with nitril tube,tapping with cello tape, Rockwool 6 inches per side , wire wesh, polythene, tapping with cello tape aluminium sheet 26 gauge cladding with dia, complete job including carriage19mm thick , 50mm dia (OD) PPR 32mm

Providing and fixing of material for the insulation of pipe with nitril tube,tapping with cello tape, for inner wall fittings, complete job including carriage19mm thick , 50mm dia (OD) PPR 25mm

Providing and fixing of material for the insulation of water storage tank with nitril tube,tapping with cello tape, Rockwool 6 inches per side , wire wesh, polythene, tapping with cello tape aluminium sheet 26 gauge cladding with dia, complete job including carriage 19mm thick , 50mm dia (OD) PPR 32mm

Providing and fixing heat tape 33 Watton PPR made of denforced or chromelox or equivalent make as approved by Engineer in Charge complete Job

Providing and placing onterrace (at all floor levels) polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing ball valve (brass) of approved quality complete 20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms.

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design.Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with (a) Crushed stone aggregate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. size of tile 600x60mm

Providing and fixing 18mm thick gang saw cut,mirror polished, premoulded and prepolished ,machine cut for kitchen platforms, vanity counters,window sills, facias and similar locations of required size,approved shade,colour and texture laidover 20mm thick base cement mortar1:4(1cement:4coarsesand), joints treated with white cement,mixed with matching pigment, epoxy touchups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite work

Providing edge moulding to 18mm thick marble stone counters,Vanitiesetc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing fully automatic hand drier

Providing and fixing C.I manhole cover weight not less than 23 Kg.

Internal Electrification

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface/recessed medium class PVC conduit ,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. (Group: A (Make: Havells life line,life /Polycab FRLS/KEI)

Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.(Make: Havells life line,life /Polycab FRLS/KEI)

2x2.5 sq.mm +1x2.5 sq.mm earth wire.

2x4 sq.mm + 1x4 sq.mm earth wire.

2x 10 sq.mm + 1x6 sq.mm earth wire.

2x 16 sq.mm + 1x6 sq.mm earth wire.

Supply, installation,Testing & commissioning of Internal lighting fixtures

Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD < 10 % ,p.f.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.

15 W LED Down light

12 W LED Down light

10 W LED Down light

Supply installation of E Fan,C Fan,W Fan

P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required. (Make: Havells USHA/Bajaj)

S/F of 1200mm sweep 3 blades,energy efficient 5 star ceiling fan complete with assembling of blades,down rod,shackle insulator,canopy etc,including 2 modular stepped type modular fan rugulator. (Make: Havells/Crompton/Orient/USHA)

Gi Box along with modular base & Cover plates

S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/Gold medel)

1or 2 module (75mm x 75mm)

3 module (100mm x 75mm)

4 module (125mm x 75mm)

6 module (200mm x 75mm)

Modular Switches/Sockets

S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/Greatwhite/Gold Medel

6 amp switch

16 amp switch (2M DP Switch)

3 pin, 6 amp socket outlet

6 pin, 16 amp socket outlet

Indicator lamp

MCCB & MCB Distribution Board

MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways :: (Make: Havells/C&S/L&T)

16 Way double door SP&N

18 Way double door SP&N

12 Way double door SP&N

Miniature Circuit Breaker/RCCB Residual Current Circuit Breaker/Double Pole Miniature Circuit Breaker

S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/C&S/V Guard)

Single pole 6A, SP MCB

Single pole 16A, MCB

Double pole 40A, DP MCB

Double pole 63A, DP MCB

200 A ,4p changeover Switch

100 A.4P C/O Switch

100A, Bus Bar Chamber

Supply,carriage at site,installation testing and commissioning of following rating of BusBar Chamber (Wall mounted) in power coated sheet steel enclosure

SITC of 100A,4Way TPN Aluminum BusBar Chamber

200A, Bus Bar Chamber

Supply,carriage at site,installation testing and commissioning of following rating of BusBar Chamber (Wall mounted) in power coated sheet steel enclosure

SITC of 200A,4Way TPN Aluminum BusBar Chamber

Charcoal/Salted Earthing

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supply & Laying of Armoured Cable & End Termination

Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc.of respective size. (Make: Havells/Polycab/KEI)

2C x 50Sq.mm Armored Al. cable

3 Phase Prodigy Energy Meter

AC Static Three Phase four wire having DLMS Protocol with optical and additional LPRF PORT,40-200 Amps rating whole current class 1.0 Accurancy as per IS and EC Standard KWH Energy Meter with backlight LCD Display (Make HP/Scure/Legrand/Schneider)

Electrical Heavy PVC Conduit Pipe

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply anmd fixing of MS fan box

Supplying and fixing of 10 x 10 x 10 cm of concealed box