Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| Sl No | Description | Qty | Unit | SALAM.T.K L2 | Nazeerpk L1 |
|---|---|---|---|---|---|
| 1.00 | Stone Aggregate(single size): 40 mm nominal size | 9.6 | cum | 2,324.07 ₹22,321.53 | 2,278.5 ₹21,883.85 Lowest |
| 2.00 | Stone Aggregate(single size):20 mm nominal size | 20.59 | cum | 2,516.85 ₹51,815.4 | 2,467.5 ₹50,799.41 Lowest |
| 3.00 | Coarse sand (zone III) | 26.98 | cum | 2,623.95 ₹70,805.98 | 2,572.5 ₹69,417.63 Lowest |
| 4.00 | Portland Cement | 18.59 | tonne | 10,183.68 ₹1,89,282.02 | 9,984 ₹1,85,570.61 Lowest |
| 5.00 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper | 3.16 | Day | 3,060 ₹9,656.44 | 3,000 ₹9,467.1 Lowest |
| 6.00 | Vibrator (Needle type 40 mm) | 3.16 | Day | 1,326 ₹4,184.46 | 1,300 ₹4,102.41 Lowest |
| 7.00 | Sundries | 14,281.34 | L.S | 2.76 ₹39,416.5 | 2.71 ₹38,702.43 Lowest |
| 8.00 | wall form panel 1250x500 mm | 3.49 | each | 1,444.32 ₹5,036.34 | 1,416 ₹4,937.59 Lowest |
| 9.00 | Corner angle 45x45x5 mm 1.50 m long | 0.87 | each | 415.24 ₹361.97 | 407.1 ₹354.87 Lowest |
| 10.00 | 100 mm channel shoulder 2.5 m long | 1.74 | each | 1,504.5 ₹2,623.1 | 1,475 ₹2,571.66 Lowest |
Tender Value
₹12.8 L
EMD Value
₹31,890
Closing Date
26 Sept 2025, 4:45 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SECRETARY
KADUNGALLOOR GRAMAPANCHAYAT, MUPPATHADAM
NREGA3/2025-26
2025_DP_799676_1
NREGA3/25-26
Open Tender
Raw Materials
Supply
KADUNGALLOOR GRAMAPANCHAYAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,865
Yes
₹31,890
Yes
6 Nov 2025
19 Sept 2025
27 Sept 2025
19 Sept 2025
26 Sept 2025
19 Sept 2025
Amount
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Coarse sand (zone III)
Portland Cement
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
wall form panel 1250x500 mm
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip (bridge clip)
Single clip
M.S. Tube 40 mm dia
Twisted steel/deformed bars
Stone Aggregate(single size): 10 mm nominal size
Stone for masonry work
Through and bond stone size 24 x 24 x 39cm
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Royalty for good earth
Wall form panel 1250x450xmm
Corner angle 45x45x5 mm 2.50 long
Column clamp 450x1070 mm
Prop 2 m (2-3.5m)
Adjustable span ESO+SI (2.35-3.40)
Solid blocks of size 30x20x20cm
Solid blocks of size 30x20x15cm
Solid blocks of size 40x20x10cm
Fine sand (zone IV)
Anjili wood scantls
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjili wood planks
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
Mild Steel round bar above 12 mm dia
Flats up to 10 mm in thickness
Rawl plug 50 mm (designation 10 nos)
48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish
24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Vitrified floor tile 60x60 cm
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Plastic emulsion paint
Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
Vitreous china pedestal type wate closet
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
One piece European Water Closet S concealed 510 X 295 X 520 mm with seat cover and fittings
Vitreous China flat back wash basin 630x450 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
Brass bib-cock-15 mm dia
PVC pipe 50 mm outer dia.6kgf/cm2
PVC pipe 110 mm outer dia. 4kgf/cm2
PVC bend 110 mm dia
S.W. gully trap type 100x100 mm
C.I. Grating 100x100 mm
C.I. Cover and frame 300X300 mm inside
Common burnt clay F.P.S. (non modular) bricks class designation 7.5
PVC vent cowl 110 mm dia
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC pipe 15 mm outer dia 10kgf/cm2
Polyethylene water storage tank with cover and suitable locking arrangemnet
Material - 75 mm valve
Oxidised mild steel tower bolt (barrel type) 200x10 mm
Oxidised mild steel screws 30 mm
Iron hooks & eyes 100 mm
Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles
Anodised Aluminium hanging type door stopper
Chromium plated Brass screws 25 mm
PTMT - Towel Rail (600 mm)
Second class teak wood in scantling
Float Valve 20mm with Rod
Boulder 50 mm to 200 mm
Mild steel tubes hot finished welded type
Welding by electric plant
Black Japan
Electrification
SALAM.T.K (BID ID -2359860)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1326146.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .