Providing water supply DI pipeline of 200mm dia and 160mm dia HDPE from Hukumpeta Junction to Balajipeta Junction 16th division of RMC Under Pushkarams-2027 (Under Pushkaram Funds)

Centrifugally cast (spun) Ductile Iron pressure pipes for water, Gas and sewage with socket spigot ends confirming to I.S.: 8329/2000 in standard working lengths of 4,5,5.5 & 6 meterfor classification K7 suitable for push on joint ( Rubber Gasket D jointing) with cement mortar lining inside the pipes with out side Zinc coating. Rates are including Transportation etc. complete as per SS and as directed by the site engineer. 300 mm dia DI K9 pipe

Manufacture as per BIS 12820/89 with S.B.R. quality rubber confirming to BIS: 5382/85, supply and delivery of rubber gaskets suitable for C.I/ D.I. S/S pipes anywhere in A.P. including cost of material, loading, incidental handling with companys standard packing, transportation, unloading & stacking etc., complete as per SS and as directed by the site engineer. suitable for 300 mm dia DI K9 pipe

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) etc., complete as per ss and as directed by the department authorities. for 300 mm dia DI K9 pipe

Jointing the C.I., D.I. Pipes & fittings with Rubber Gasket, push on joint excluding the cost of the gasket but including all sundries filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per BIS No.3114/1994/12888/1997.etc., complete as per ss and as directed by the department authorities. for 300 mm dia DI K9 pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) etc., complete as per ss and as directed by the department authorities.(PE-100 Grade) ( 160 mm Dia )

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634- Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc., complete as per ss and as directed by the department authorities. ( 160 mm Dia )

Earth work for Ordinary Soil excavation for all kinds of Soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. (Mannual means)

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Cutting open CC road surface with concrete saw cutter and removal with Breaker including stacking of excavated materials for pipe line trench work with all labour charges etc. complete as per SS and as directed by the Site Engineer.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (300 mm Dia ) PN 1.6 MPA

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (100 mm Dia ) PN 1.6 MPA

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (150 mm Dia ) PN 1.6 MPA

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 300 mm dia )

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 100 mm dia )

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 150 mm dia )

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (300 mm dia)

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (100 mm dia)

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (150 mm dia)

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 including transportation etc., complete as directed by the site engineer. For 100mm dia DI Air Valve PN 1.6 (MPa)

Labor charges for fixing including boring the mains and threads the bore fixing nipple etc., complete. complete as per SS and as directed by the site engineer

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet as per IS -1161 and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges cost of welding rods power charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 150mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 300mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 100mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 100mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (250 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (160 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (315 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (110 mm dia HDPE Long neck Collars )

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 200 x 150 mm dia)

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 300 x 100 mm dia)

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 100 x 100 mm dia)

Providing Tap inter Connection with 15mm size G.I. Pipe medium grade property as per IS 12-439 with GI Fittings includes excavation of trenches and refilligthe trenches including cost of saddle / clamp, ferrule and Tap head including cost and conveyance of all materials and all labour charges etc., complete as directed by the site engineer.

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Including Transportation etc., complete as directed by the site engineer

Centrifugally cast (spun) Ductile Iron pressure pipes for water, Gas and sewage with socket spigot ends confirming to I.S.: 8329/2000 in standard working lengths of 4,5,5.5 & 6 meterfor classification K7 suitable for push on joint ( Rubber Gasket D jointing) with cement mortar lining inside the pipes with out side Zinc coating. Rates are including Transportation etc. complete as per SS and as directed by the site engineer. 300 mm dia DI K9 pipe

Manufacture as per BIS 12820/89 with S.B.R. quality rubber confirming to BIS: 5382/85, supply and delivery of rubber gaskets suitable for C.I/ D.I. S/S pipes anywhere in A.P. including cost of material, loading, incidental handling with companys standard packing, transportation, unloading & stacking etc., complete as per SS and as directed by the site engineer. suitable for 300 mm dia DI K9 pipe

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) etc., complete as per ss and as directed by the department authorities. for 300 mm dia DI K9 pipe

Jointing the C.I., D.I. Pipes & fittings with Rubber Gasket, push on joint excluding the cost of the gasket but including all sundries filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per BIS No.3114/1994/12888/1997.etc., complete as per ss and as directed by the department authorities. for 300 mm dia DI K9 pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) etc., complete as per ss and as directed by the department authorities.(PE-100 Grade) ( 160 mm Dia )

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634- Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc., complete as per ss and as directed by the department authorities. ( 160 mm Dia )

Earth work for Ordinary Soil excavation for all kinds of Soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. (Mannual means)

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Cutting open CC road surface with concrete saw cutter and removal with Breaker including stacking of excavated materials for pipe line trench work with all labour charges etc. complete as per SS and as directed by the Site Engineer.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (300 mm Dia ) PN 1.6 MPA

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (100 mm Dia ) PN 1.6 MPA

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. etc. complete as directed by the Departmental Authorities of the work. (150 mm Dia ) PN 1.6 MPA

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 300 mm dia )

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 100 mm dia )

Labour Charges for Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces etc., complete as per ss and as directed by the department authorities. ( 150 mm dia )

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (300 mm dia)

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (100 mm dia)

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs.and testing to required pressure complete (reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and material needed for testing etc. complete as per ss and as directed by the site engineer. (150 mm dia)

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 including transportation etc., complete as directed by the site engineer. For 100mm dia DI Air Valve PN 1.6 (MPa)

Labor charges for fixing including boring the mains and threads the bore fixing nipple etc., complete. complete as per SS and as directed by the site engineer

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet as per IS -1161 and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges cost of welding rods power charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 150mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 300mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 100mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 100mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (250 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (160 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (315 mm dia HDPE Long neck Collars )

Supply Delivery and fixing of HDPE long neck collars confirming to IS standards including cost and conveyance of all materials and cost with all taxes and conveyance to work spot etc. complete as per ss and as directed by the site engineer. (110 mm dia HDPE Long neck Collars )

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 200 x 150 mm dia)

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 300 x 100 mm dia)

Labour charges for inter connection with the existing pipe line to proposed HDPE Pipe line including Earthwork, jointing materials with all labour and fitter charger etc. complete as per the instruction of the Department authorities. 100 x 100 mm dia)

Providing Tap inter Connection with 15mm size G.I. Pipe medium grade property as per IS 12-439 with GI Fittings includes excavation of trenches and refilligthe trenches including cost of saddle / clamp, ferrule and Tap head including cost and conveyance of all materials and all labour charges etc., complete as directed by the site engineer.

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Including Transportation etc., complete as directed by the site engineer

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

3) Provision for Seigniorage charges

4) DMF @30% on Seigniorage charges

5) MERIT @2% on Seigniorage charges