Dam safety Kallada Dam

Amount

Urgent protection works

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per specification and as per the direction of Engineer-in-charge.

od25786/2020_2021/P2 : Galvanized wire mesh of 4.10mm dia of 25mm spacing with average width of aperture with M.S. Flat 15x3 mm and nuts & bolts and including all other extra items as per the direction of engineer in charge.

10.20 : Providing and fixing bolts including nuts and washers complete.as per specification and as per the direction of Engineer-in-charge.

60.4 : Locking Arrangements - Supplying and Fixing lock and locking arrangements with suitable chain hooks,and padlock of 65mm size.

od25881/2020_2021/P2 : Providing and fixing gate wheel including all accessories fitting charges etc complete as per the direction of engineer in charge

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)as per specification and as per the direction of Engineer-in-charge.

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.as per specification and as per the direction of Engineer-in-charge.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more as per specification and as per the direction of Engineer-in-charge.

6.3.2A : With Modular bricks (above plinth level below floor 2 level)as per specification and as per the direction of Engineer-in-charge.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)as per specification and as per the direction of Engineer-in-charge.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer as per specification and as per the direction of Engineer-in-charge.

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre as per specification and as per the direction of Engineer-in-charge.

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work as per specification and as per the direction of Engineer-in-charge.

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work as per specification and as per the direction of Engineer-in-charge.

13.71 : Lettering with black Japan pint of approved brand and manufacture as per specification and as per the direction of Engineer-in-charge.

od21571/2020_2021/P2 : Necessary for buying a compact binocular of long vision , having Magnification: Terra Ed 10x42 ISI certified branded companies like Nikon, Celestron, Zeiss ,all other extra items, including cost,conveyance and any other expences as per the direction of engineer in charge ,

od34399/2020_2021/P2 : Welding by gas or electric plant and removing the existing fully damaged parts by gas cutter or other instrument including labour,carriage-transportation of all equipment's at site,and all other extra items etc. complete as per the direction of engineer in charge .

Tomy Vallamattam

Bidder Name

Tomy Vallamattam

NADARAJAN