PERIODICAL SERVICES TO CERTAIN OTM AND RESIDENTIAL BUILDINGS AT NAD, AYUDH VIHAR, TS(K) AND PERIYAR VIHAR AND REPAIRS/REPLACEMENT OF PAINTING/LINE MARKING AND CONSTRUCTION JOINTS AND JOINT FILLING AT DISPERSAL/TAXI TRACK AREA AT NEDUMBASSERY UNDER AG

Amount

Material & Labour for preparing old wall surfaces plastered or un plastered by washing, brooming down or wire brushing and applying one coat of white wash on old decorated surfaces on walls including cornices etc complete all as specified and directed. NOTES FOR ITEM NO 1 TO 18: - (i) The scope of Work is to be carried out from ground level to nearly 20 Metres Height. Contractor shall consider these aspects while quoting the tender and no extra cost is allowed at later stage. (ii) Rate included for using mechanical means for surface preparation and application of paint as per manufacturer’s instruction all are specified and directed by Engineer in charge. (iii) Rate also included for scaffolding as required. Contractor should arrange necessary scaffolding and all safety precaution for workers at the time of carrying your work as described in the BOQ. (iv) Contractor should visit site before quoting the tender to assess the resources required to execute the work at site.

All as per Serial Item No 1 above, but on ceiling surfaces.

Material & Labour for preparing old wall surfaces plastered or un plastered by washing, brooming down or wire brushing and applying one coat of colour washing on old decorated surfaces on walls including cornices etc, complete all as specified and directed.

Material & Labour for preparing old distempered surfaces of walls by washing, brushing/rubbing down etc and applying one coat of acrylic washable distemper complete all as specified and directed.

All as per Serial Item No 4 above, but on ceiling surfaces.

Material & Labour for preparing old painted surfaces of walls by washing, brushing/rubbing down etc and applying one coat of cement based paint complete all as specified and directed.

Material & Labour for preparing old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per Serial Item No 7 above, but on steel surfaces.

Material & Labour for Re-writing of existing letters or figures (Block Roman, Italic or Indian) not exceeding 30cm (height of letter 7cm), complete all as specified and directed.

Material & Labour for Re-writing stops, commas, short lines, dashes, hyphen, brackets etc, and complete all as specified and directed.

Material & Labour for preparation of old painted external surfaces, brooming down plastered/ un plastered surfaces of old work, cleaning old decorated surfaces using steel wire brushes / sand paper and finishing wall with Acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 Litre/10 Sqm coverage complete all as specified and directed

Material & Labour for preparation of old painted external surfaces, brooming down plastered/ un plastered surfaces of old work, cleaning old decorated surfaces using steel wire brushes / sand paper and finishing wall with Acrylic smooth exterior paint of required shade in approved camouflage design two or more coat applied @ 1.67 Litre/10 Sqm coverage complete all as specified and directed

Material & Labour for preparation of old painted external surfaces, brooming down plastered/ un plastered surfaces of old work, cleaning old decorated surfaces using steel wire brushes / sand paper and finishing wall with Acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 Litre/10 Sqm coverage including priming coat of exterior primer applied @ 2.2 Kg /10 Sqm coverage complete all as specified and directed

Material & Labour for preparation of old painted external surfaces, brooming down plastered/ un plastered surfaces of old work, cleaning old decorated surfaces using steel wire brushes / sand paper on walls of over head tank and finishing wall with Acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 Litre/10 Sqm coverage over and including priming one coat of exterior primer @ 2.2 Kg /10 Sqm coverage complete all as specified and directed.

Material & Labour for preparation of old painted external surfaces, brooming down plastered/ un plastered surfaces of old work, cleaning old decorated surfaces using steel wire brushes / sand paper of Ceiling of over head tank and finishing wall with Acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 Litre/10 Sqm coverage over and including priming one coat of exterior primer @ 2.2 Kg /10 Sqm coverage complete all as specified and directed.

Taking down cement plaster or brick or stone wall including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

Material & Labour rendering 15mm thick on fair faces of concrete surfaces in Cement Mortar in 1:6 finished even and fair without using extra cement complete all as directed.

Material & Labour for preparation of newly plastered surfaces and applying two coats oil bound distemper with one coat of alkali resistant primer including 3 mm thick wall care putty complete all as specified and directed.

Material and Labour for removing the existing joint Sealing completely by mechanical means and remove all the dust and laitance by blown dry by compressed air and prime the surface with primer 20 using a clean dry brush to required depth and apply masking tape on both sides of the joint exceeding 5mm and not exceeding 20mm width and minimum 15mm depth completely for uniformity and Colpor 200 must be applied between 30 minute and 2 hours when the primer has become touched dry, the curing agent shall be mixed with the base component and mix for a minutes of 3 minute and loaded into a sealant gun after removing the nozzle and cap and apply on the joint fully and make the filling flush and remove the masking tapes completely and allow to set for a minutes of 12 hours to 16 hours before allowing traffic complete all as directed by Engineer In charge. Note: Colpor 200, primer 20 and backer rod shall be measured and paid separately.

Supply only Fosroc Colpor 200 and primer 20 or equivalent in Bostik/Sika/Sikaflex/Master Seal with all necessary accessories complete all as directed by Engineer In charge.

Supply and fixing backer rod as per size (30mm, 12mm, 8mm dia) as per site required complete all as per Manufacturer instruction complete.

Material and Labour for preparing concrete/bituminous surface of road/dispersal and marking 2.5mm thick central lines, stop lines, dashes, arrows etc and the like not exceeding 10cm wide on road pavement with hot applied thermoplastic Road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacture’s instruction complete all as specified and directed

St George Engineering Works

AVM CONSTRUCTION

AS ENTERPRISES

Omkar Manpower Consultancy

RASNA ENTERPRISES

KENZ CONSTRUCTIONS

M/s S & S Enterprises/ Suresh Shivasankarapillai

M/S AARJAY ASSOCIATES