Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-Finance R O SUJANPUR TEHSIL DISTT HAMRIPUR | L1 | Accepted-Finance accept | |
| 2 | L2₹39.3 L+₹2.7 L (7.45%)Accepted-Finance NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | KANGRA | HIMACHAL PRADESH | 176001 | L2 | Accepted-Finance accept | |
| 3 | L3₹42.4 L+₹5.8 L (15.8%)Accepted-Finance VILLAGE VILLAGE TEHSIL BAIJNATH DISTRICT KANGRA | MANDI | HIMACHAL PRADESH | 175013 | L3 | Accepted-Finance accept |
Tender Value
₹43.9 L
EMD Value
₹73,370
Closing Date
4 Jul 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer JSV Division Thural
O/O The Executive Engineer JSV Division Thural
Improvement of distribution system of LWSS Jharet Rajhoon WSS Parour Kharot in Tehsil Palampur Distt. Kangra HP
2022_HPIPH_62233_1
THL-KNG05-729 (6150-6210 dated 27.06.2022)
Open Tender
Civil Works - Water Works
Item Wise
180 days
Improvement of distribution system of LWSS Jharet
Please refer Tender documents.
8 documents required · 8 mandatory
₹800
EE JSV Division Thural
₹73,370
Yes
14 Jul 2022
27 Jun 2022
5 Jul 2022
27 Jun 2022
4 Jul 2022
27 Jun 2022
Amount
Excavation in foundation trenches etc.( for pipes and pits)up to all depths in all kind of soil such , as pick work, jumper work saturated soil including bailing or pumping out water, blasting soft/hard rock or chiselling soft /hard rock where blasting is prohibited in all leads & lifts including triming & dressing of sides levelling of beds to correct grade including shorting struttering planking timbering and dewatering where ever required stacking usable/unusable material / soil separately and after laying jointing and testing of pipes returning the usable soil in trenches in 15cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated earth as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of a diversion for traffic night signals,fixing caution boards crossing over trenches for access to houses fencing etc. as per direction of Engineer-in-Charge with in all leads and lifts.
Laying, jointing with circumfrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) steel flanged pipes after every 100 mtr of pipe of following diametr .Conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, etc. as per site requirement made from parent tubes . The laying of pipe shall also include flanged joints duly welded in three layers (Two inner & one outer), where ever required as per direction of the Engineer-in-charge (Earth work in trenches and the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) and all operations such as cutting, welding, jointing, fabrication of tees i.e. lowering and laying in excavated trench to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes and all the specials ( If damaged during laying & jointing operation of pipe) made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing, D.P. test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts.
150mm dia ( M.Class) Rd 0 to 5300 =5300 Rmt
150mm dia ( M.Class) Rd 7430 to 7880 =450 Rmt
150mm dia ( M.Class) Rd 3690 to 4470 =780 Rmt
150mm dia ( M.Class) Rd 4470 to 8616 =4125 Rmt
Providing MS flanges (In pairs) for the joints of G.I. pipes mentioned as below and same shall conform to BIS 6392-1971 ( latest with up to date amendments) including the cost of nuts and bolts of required sizes, 3mm thick compressed asbestos fiber/synthetic rubber gaskets conforming to relevant BIS standards and it shall also include carriage of materials within all leads and lifts complete in all respect to the best satisfaction and direction of Engineer in charge
150mm dia ( M.Class) Rd 0 to 5300 =5300 Rmt /100 =53 Nos with Flange table -5
150mm dia ( M.Class) Rd 7430 to 7880 =450 Rmt/100=5 Nos with Flange table -17
150mm dia ( M.Class) Rd 3690 to 4470 =780 Rmt /100 =8 Nos with Flange table -5
150mm dia ( M.Class) Rd 4470 to 8616 =4125 Rmt/100=41Nos with Flange table -17
Shadil Thakur
AMIT CHOUDHARY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .