Reconductoring LT line from kodungoor to 20th Mile

Reconductoring LT line

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 50sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Installation of Pre-insulated lugs for 70sqmm

Installation of Pre-insulated lugs for 50sqmm

Installation of Pre-insulated lugs for 16sqmm

Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections

Providing End Caps

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one section fuse

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling (without damage) one ordinary street light/CFL/LED fitting from the pole and stacking.

Wiring and installing one new CFL street light fitting on existing pole and giving connections.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Reshackling one span LT Sph 2 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Installing one pole top service connection box Sph 6way and giving connections.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Straightening one slanted 11kV pole after unbinding the line and rebinding the line after work.

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Please Enable Macros to View BoQ information