8572/E8

Amount

Excavation in trenches, nexc. 1.5m wide and nexc 1.5m in depth; for laying of cable, n. exc 10 sqm on plan and in depth and getting out in soft/loose soil all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in hard/dense soil all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth, for foundation and nexc 10sqm on plan and getting out in hard dense soil all as specified and as directed.

Excavation in trenches nexc 1.5m wide and n.exc 1.5m in depth for foundation and nexc 10sqm on plan and getting out in hard rock by mechanical means using chisels/ pneumatic hammer all as specified and as directed.

M&L PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete all as specified and as directed.

M&L P C C 1 : 2 :4 type B1 ( using 20mm graded crushed stone aggregage ) as in surface channels and drains all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping including necessary form work all as specified and directed.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, foundation and plinth beams for rough finished surfaces of concrete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including suports over hangs all as specified and directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges fair finished surfaces of concrete all as specified and directed..

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and as directed.

Use & waste formwork to sides of pillars, posts, struts, piers, columns, and stanchions flat rough finished surfaces

M&L RCC M-25 grade (design mix using 20 mm graded crushed stone aggregate) as in foundations, footings, plinth beams all as specified and directed.

M&L RCC M-25 grade design mix (using 20 mm graded crushed stone aggregate) as in columns all as specified and directed.

M&L RCC M-25 grade (using 20mm graded crushed stone aggragate) for lintel beam, cantilevers, bressummers all as specified and directed.

M&L RCC M-25 grade (using 20mm graded crushed stone aggragate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

M&L TMT bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L TMT bars in reinforcement 8 mm dia in stirups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L precast cement concrete 1:3:6 type C-1 using 20mm graded aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:6) all as specified and directed.

M&L for pre-cast cement concrete in 1:3:6 type C1 block masonry with solid blocks exc 10cm in width and settting in 1:4 cement mortar complete all as specified and as directed.

M&L DPC 40mm thick in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork all as specified and directed.

Supply only integral water proofing compoung

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick in hard dense soil all as specified and as directed. .

Removing excavated meterials of soil nexc 50m and depositing where directed at a level nexc 1.5m above the starting point all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde- E- 250) quality- A all as specified and as directed.

S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long dia of neck 12 to 20 mm all as specified and as directed.

S&F mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (Fe 410-W (Gde E-250) quality A) all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F pe-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for pessed steel frames 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed

S&F 100 mm long medium weight cold rolled mild steel butt hinges all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple 250 mm long (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F Extruded aluminium alloy handles 125mm long, fabricated type anodisedall as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (140mm Size) all as specified and directed

S&F aluminium anodised, barrel tower bolts150mm long of extruded section all as specified and directed.

M&L for everest designer suspended false ceiling using GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm & wall angle 24mmx24mm including provision of 6mm thick (High pressure steam cured), pre-painted self embossed, reinforced designer cement board conforming to IS 14862:2000 to be placed in a grid of G.I. system duly suspended with 4mm dia G.I./M.S. bar hanger fixed with steel dash fastner or iron purlins from the roof witrh adjustment clip providing in position for light fixture all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces with in CM 1:6, finished surfaces even and smooth withot using extra cement all as specified and as directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces with CM (1:4) finished surfaces even and smooth without using extra cement all as specified and as directed.

M&L rendering 5mm thick on ceiling in CM 1:3 all as specified and direceted

M&L for rendering 15mm thick on fair faces of brick work or concrte surfaces in CM 1:3 all as specified and directed.

M&L preparing of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of wall putty as priming coat on internal surfaces of walls all as specified and as directed.

M&L preparing new plastered surfaces and applying two coats of cement base paint over a coat of wall putty and primer on external walls all as specified and as directed.

M&L preparing new plastered surfaces and applying two coats of white wash on internal walls all as specified and directed.

M&L preparing new plastered surfaces and applying two coats of white wash on ceiling all as specified and directed.

M&L hardcore of gauge n exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and well rammed to a true surface all as specified and as directed.

M&L 100 thick sub base PCC 1:4;8 type D2 (using 40 mm graded crushed stone aggregate) all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in sub base all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 20mm thick screed bed in CM 1:4 all as specified and as directed.

S&F Non-skid ceramic coloured tiles 300x300x7mm thick in floor set and jointing in neat cement slurry and pointing in white or coloured cement to match the shades of the tiles incluing screed bed or bedding layer of mortar 15 mm thick in CM 1:6 all as specified and directed.

S&F glazed ceramic coloured tiles 350x250x7 or 450x350x7 mm thick in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match complete and rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing the cement concrete surface even and smooth without using extra cement cement all as specified and directed

M&L prepolished chequered cement concrete tiles with white cement and pigments of size 30cmx30cmx25mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shades of the tiles in foot path including screed bed or bedding layer 20 mm thick screed bed or bedding layer with CM 1:6 as in base for laying chequered tiles all as specified and directed.

S&F factory made power coated aluminum frame for door, windows partition wall, shutters etc including styles and rails with standard anodized aluminum section with one or more rebats including aluminium shap beading (wall thichness of aluminum section not less than 2mm) all as specified and directed (glazing, rubber bedding and aluminum hardwar shall be measured and paid separately)

M&L rubber beadig for fixing glass panes in aluminium frame work all as specified and directed

S&F 3mm thick sheet glass, fixed to aluminum frame work in panels exc 0.5 sqm in each pane all as specifed and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed

M&L preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L painting to new wooden surfaces by applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with ms square tube , all as per specification and drawings.

S&F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement all as per specification & drawing.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, flush pipe, low level, with inlet, ball valve, float and handle including brackets all as specified and directed.

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white, with integral foot rests ( excluding flushing cistern and flush pipe)all as specified and directed.

S&F vitreous china white wash hand basin white flat back size 550x400 including low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin all as specified and as directed.

S&F steel water tubing 15mm dia galvanised iron, medium grade, with all fittings and fixtures fixed to walls & ceiling or laid in floors or concealed in walls etc of size all as specified and directed.

S&F steel water tubing 20mm dia galvanised iron, medium grade, with all fittings and fixtures fixed to walls & ceiling or laid in floors or concealed in walls etc of size all as specified and directed.

S&F bib taps, cast copper alloy fancy type, chromium plated, with long shank long body (concealed type) for sink with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm bore all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position all as specified and directed.

S&F gun metal bronze globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, bore 20 mm dia of pipe all as specified and directed..

S&F in low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin all as specified and as directed.

S&F 100 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) all as specified and directed.

S&F 150x150mm size salt-glazed stone ware gully traps, square or round mouthed, type `P' all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x160x90mm all as specified and directed.

S&F towel rail 450mm long of stainless steel chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor (joining to be done with solvent cement ) including PVC brackets all as specified and directed.

S&F 110mm bore PVC (SWR ) bends and radius all as specified and directed..

S&F 110mm bore PVC ( SWR ) 'P' trap all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F 100mm bore PVC ( SWR ) vent cowl all as specified and directed.

Spreading and levelling in layers nexc. 25 cm thick including well ramming, watering in layers all as specified and directed.

Supply & fixing stop valves, cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe of size 15mm bore all as specified and directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm dia bore all as specified and directed.

S&F 25 mm bore ball brass valves, high pressure with polythene float & fly nut complete screwed for iron pipe all as specified and directed.

M&L for washing, rubbing down with water and providing 20mm thick cement plaster in cement mortar 1:4 finished fair and even without using extra cement to receive water proofing treatment and providing and laying of water proofing treatment on roof with APP modified pre-fabricated 5 layer 3mm thick water proofing membrane super thermo lay of STP Limited or Dr Fixit (Torch Shield) with non woven polyster mat reinforcement of 160gms weight of membrane @ 3.6 Kg per Sqm over solvent based bitumen primer shalitex primer or equivalent @ 0.3Ltrs per Sqm by same manufacturer confirming to IS 3384-1986. The membrane shall be laid by using butane torch. The end lap should be 100 mm and the side lap must be 75mm all as specified and directed.

S&F aliuminium anodised DG102 'DECO Grill' of size 100mm x 100mm x 7mm thick of approved design for windows and ventilators with and including F/U channel all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under, and hunching against the sides of 150mm dia pipes after they are laid and tested complete all as specified and directed.

Supply and laying 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and directed.

Supply only Liquid water proofing compound all as specified and directed.

M&L for providing cement concrete Type B1 1:2:4 (20mm graded aggregate) cover slabs (for man holes etc) set in CM 1:6 all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L point wiring in PVC casing & caping in some paces as per required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FR) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as elbow, bends, junction boxes, saddles including PVC board (ISI Mark) and screws and rawal plug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbels all as specified and directed for one light/bell point controlled by one, one way switch

All as per item No 92 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch.

All as per item No 92 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch.

All as per item No 92 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuty earth wire connected to common earth dolly all as specified and directed

S&F switch piano flush type 5/6 Amps single pole one way all as specified & directed. Make : Havells/Anchor

S&F switch piano flush type 15/16 Amps single pole one way all as specified & directed. Make : Havells, Anchor

M&L for socket out let 5 pin 5/6 Amps all as specified and directed. Make : Havells,Anchor

M&L for socket out let 2-in-1, 6 pin 5/6 & 15/16 Amps all as specified and directed. Make : Havells,Anchor

S&F MCB DB SPN, 8 way 240 volt, double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole all as specified and directed. Make: Havells, L&T, Legrand

S&F MCB SPN 32 Amps all as specified and directed. Make : ABB cat part No 2CDS271103R0104 or equivalent of Legrand/Schnieder

Supply and fix of MCB, SP 06 to 32 Amps all as specified and directed. Make : ABB cat part No 2CDS271001R0204 or equivalent in Legrand/Schnieder

M&L ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated all as specified and directed. Make :Havells,Anchor

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings. Make : Havells,Anchor

S&F 10 watt LED bulb, cool day light, 230/240V AC supply all as specified and directed. Make : Havells/philips/Bajaj

S&F LED tube light fitting, four feet, bright 18 watt. slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Make: Havells- item code - LHEXBLP7JN1W018 or equvel to Philips all as specified and directed.

Supply and Lay armoured XLPE PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 core 10 sqmm fixed on wall/in trenches using necessary clamp, screws, saddles all as specified and directed

M&L fine sand, filling in trenches for cable cushioning and gently punned down by manually with hands all as specified and directed. Note: For the purpose of pyment only punned thickness will be measured.

Material and labour sub class "B" bricks as cable protection cover to LT underground cable with laid dry with length of brick equal to width of bricks and flat abutting each other with gaps between adjacent bricks not exceeding 10 mm all as specified and directed

M&L galvanised steel tubing, light grade in wall/chases and in trenches for cable protection/earth lead protection of 50 mm bore all as specified and directed

M&L for cutting & screwing existing steel tubing of size 50 mm dia for alterations or additions or lengthening screw on pipe to from connector and done in position without taking down all as specified and directed.

Supply and laid in trenches 25 mm dia galvanized iron pipes medium grade with all fittings and fixtures all as specified and directed.

All as per item No 112 but 20 mm dia

Supply and fix of 25 mm dia gun metal gate valve with iron wheel screwed both end for iron pipe all as specified and directed.

All as per item No 114 but 20 mm dia

Supply and fix 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and directed.

M&L for brick masonry valve pit chamber for opening and closing of valve with internal dimensions 600x600x600 mm built in CM 1:6 including necessary excavaion and earth work in any type of soil/strata including fixing MS sheet cover 6mm thick over angle iron frame of size 25x25x6mm with laying and locking arrangement with two coats of synthetic enamel paint over one coat of red oxide primer and 15 mm thick plaster in CM 1:4 internally and externally all as specified and directed.

Supply and fixing electric storage water heater of capacity 35 Litres of five star rating, AC 230 volts with PVC connection pipe 15 mm dia heavy duty aproximate length 450 mm long - 02 Nos, Hole fastener Nut & Bolts made of iron approximate length 6 cm long - 04 Nos, union socket 15mm dia - 02 Nos, Tee 15mm dia - 01 No all as specified and directed.

S&F exhaust fan AC single phase 230/240 volts, 50 HZ size 380 mm sweep 900 RPM, MS body heavy duty operating with louvers shutter, grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulated 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor all as specified and as directed.

RAKESH CHANDRA PANT

ms triveni nirman

Harendra Singh Panwar