Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.2 LAccepted-AOC | ₹2.2 L | 1 | Accepted-AOC LOW RATE |
| Sl No | Description | Qty | Unit | Ajith E P L1 |
|---|---|---|---|---|
| 1.00Construction of MINI M C F | ||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.38 | cum | 312.9 ₹117.34 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.38 | cum | 8,034.06 ₹3,012.77 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 803.27 | kg | 162.7 ₹1,30,691.7 Lowest |
| 1.00 | OD421737/2025-2026:Providing & fixing Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm with M.S. Flat 15x3 mm and nuts & bolts complete. (Modified data of 10.29.1 with GI mesh 4mm dia) | 12.6 | sqm | 878.81 ₹11,073.01 Lowest |
| 1.00 | OD421738/2025-2026:Providing and fixing Alu Zinc profile profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50 of DAR) | 52.08 | sqm | 501.87 ₹26,137.39 Lowest |
| 1.01 | OD421740/2025-2026:Providing and fixing Alu zinc roof sheet 0.40 mm (+ 0.05%) using self drilling/self tapping screws complete:Ridges plain (500-600 mm) (Modified data 12.51.1 DAR) | 8.4 | metre | 413.06 ₹3,469.7 Lowest |
| 1.01 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 62.59 | sqm | 208.78 ₹13,066.71 Lowest |
| 1.01 | OD421739/2025-2026: Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminum sheet as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey color on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ).Modified 16.60.1 | 0.72 | sqm | 2,325.75 ₹1,674.54 Lowest |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 308 | per Letter per cm height | 5.51 ₹1,697.08 Lowest |
Tender Value
₹2.4 L
EMD Value
₹5,930
Closing Date
19 May 2026, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER
Annual Plan Kurmathoor GP PROJ No 277/26 VARNAM 2025 CONSTRUCTION AND INSTALLATION OF BOTTLE BOOTH AND MINI MCF
2026_LSGD_833761_13
AE/KMTR/TN/08/2025-26
Open Tender
Civil Works - Others
Item Rate
180 days
KURUMATHUR GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
Yes
₹5,930
Yes
21 Aug 2026
12 May 2026
21 May 2026
12 May 2026
19 May 2026
12 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of MINI M C F | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.004 | OD421737/2025-2026:Providing & fixing Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm with M.S. Flat 15x3 mm and nuts & bolts complete. (Modified data of 10.29.1 with GI mesh 4mm dia) | 1 | sqm | - | - |
| 1.005 | OD421738/2025-2026:Providing and fixing Alu Zinc profile profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50 of DAR) | 1 | sqm | - | - |
| 1.006 | OD421740/2025-2026:Providing and fixing Alu zinc roof sheet 0.40 mm (+ 0.05%) using self drilling/self tapping screws complete:Ridges plain (500-600 mm) (Modified data 12.51.1 DAR) | - | metre | - | - |
| 1.007 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 0.4 | sqm | - | - |
| 1.008 | OD421739/2025-2026: Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminum sheet as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey color on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ).Modified 16.60.1 | - | sqm | - | - |
| 1.009 | 13.71:Lettering with black Japan pint of approved brand and manufacture | - | per Letter per cm height | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.10 MB
viewsbd.pdf
Tender Documents • 1.69 MB
BOQ_1436842.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .