Repairing of Administrative Block (Office building) by providing vitrified floor tiles, roof grading etc. at 3rd Bn TSR, Kachucherra, Dhalai, Tripura.

Dismantling old plaster or pointing, ranking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer-in charge.

Demolishing cement concrete manually/by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer-in-charge:-1) Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix)

Providing and laying cement concrete of retaining walls, return walls (any thick-ness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills fillets sunken floor etc. upto floor five level, excluding the cost of centring shuttering and finishing - (i) 1:2:4 (1 Cement 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size)

Providing & fixing super latex-302 (SBR based) water profing expert (Dr. Fixit) on R.C.C slab with 3 (Three) component by mixing super latex, water & cement at 1:4:7 or as per Manufacturer recommendation in/c cleaning the roof surface with wire brush & with clean water before application & curing the chemicals by sprinkling water for 3-5 days after application of water proofing components complete as per direction of the Engg in charge and technical recommendation of the manufacturer.

Grading roof for water proofing treatment complete as required as per direction of the Engineer-in charge with: a) Cement concrete 1 :2: 4 (1 Cement: 2 fine sand: 4 graded stone aggregate 20 mm nominal size)

Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete :- (1) In Cement mortar 1:4 ( 1 Cement : 4 fine sand)

Providing and laying 1st class quality vitrified floor tiles in different sizes (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622-2017, of approved make, in all colours and hades, laid over 20mm thick cement mortar 1:4 (1cement: 4 fine sand), jointing with grey cement slurry @ 3.3 kg /Sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in charge. 1) Glazed Vitrified Tiles (Glossy/ Mat finished/Anti-Skid) size of tiles 600mm x 600mm.

12mm cement plaster of mix a) in cement mortar 1:4 ( 1 Cement: 4 fine sand)

12mm cement plaster of mix in/c net cement punning a) in cement mortar 1:4 ( 1 Cement: 4 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: a) New work (two or more coats) over and including water thinnable priming coat with cement primer.