Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.6 Laccepted-aoc | ₹2.6 L | accepted-aoc |
Tender Value
₹2.6 L
EMD Value
₹2,641
Closing Date
16 Mar 2026, 3:00 pmClosed
Executive Engineer Vijayawada
vjwd
CONSTRUCTION OT THREE WORK STATIONS AT ELURU RANGE OFFICE OF ELURU DISTRICT
913313
TN.NO.57/ 2025-26 DT:13-03-2026
OPEN - NCB
Supply of Furniture
ELURU
12 documents required · 12 mandatory
₹94
₹2,641
31 Mar 2026
13 Mar 2026
13 Mar 2026
Half Height Modular partition for Lenear Work Station: Supply and installation 50 mm thick Modular partition for work stations of height 1200 mm as per drawings with Aluminum powder coated interlocking system with pipe 48mmX48mmX1mm with particle board framing to make the panels solid and with both side 9 mm thick Prelaminated particle board pressed with Adhesive for tiles based system and with provision of raceways for cabling and wiring at bottom and center above the work top provision for Pinup board with fabric covering High marker board with complete finished item of work .(For FF Office room).(Rate approved in Disha PSB @ Eluru Furniture work).
Work station Top: Supply and fixing of work station top in 25mm thick prelaminated particle board and all exposed sides covered with 2mm thick PVC edge binding tape in hot melt adhesive and with necessary hard ware and complete finish item of work as per approved drawing and shades. size: 4'x2'.(Rate approved in Disha PSB @ Eluru Furniture work).
Revolving Chairs: Supply of low back chair Injection molded PP back with breathable, Nylon Mesh in back with PU moulds in seat, PP base & gas lift. Synchromech For FF Office room room.(Rate approved in Disha PSB @ Eluru Furniture work).
Providing and supplying moulded plastic arm chairs made of virgin polypropylene material, manufactured through injection moulding process, of approved colour and design, with proper back support and arm rests, strong and durable, having smooth finish without cracks or defects, weighing not less than 2.2 kg, capable of withstanding normal load, of approved make, complete in all respects and as directed by the Engineer-in-Charge. Make: Reputed make such as **Nilkamal / Supreme / Cello / equivalent approved.
Storage Side Table with shuttering : (L=4’x B=3’x D=1'-6") Size Supply fixing of 18mm thick prelaminated particle board top side shelf & shutters, and back panel 9mm thick prelaminated particle board, all exposed side shelf bottom 0.8,, thick PVC edge binding tape with hot melt glue (Applied at 200 degrees temperature). Providing hard ware like, S.S handles multipurpose lock and other necessary hardware etc, complete finish item of work as per approved shade.
Key Board tray MS powder coated tray with telescopic channel. (Earl Bihari make).(Rate approved in Disha PSB @ Eluru Furniture work).
Cpu Stand with MS channel and wheel casters. (Earl Bihari make) (Rate approved in Disha PSB @ Eluru Furniture work).
Providing front face sliding shuttering using 18 mm thick pre-laminated particle board to the existing RCC Racks sliding including cost and conveyance of all materials,labour charges and all fittings etc,.complete for finished item of work.
Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification.
Painting to new walls with 2 coats of Plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 19/20mm size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.Makes: Precision/VIP / Modi/ GoldMedal / Million plast / GM / Sudhakar / Polyline/Orbit/Anchor/Beljin
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS/ FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in non-Residential Buildings. Wires Makes: Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM Switches & Cover Frame Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)
Supply and fixing of 12W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.
Supply and Fixing of 16/20A Modular 1 way combi Socket with shutter - 1No and 16A / 20A 1 Way Modular Switch - 1No with 3 Modular PVC surface Box including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova/
Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. ( For Phase Neutral and Earth) Makes: Finolex / RR kabel / Havells /KEI/ Polycab/ Gloster/ Goldmedal/GM
Supply and run of 1 of 36/0.3mm (2.5 Sq.mm)FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Finolex / RR kabel / Havells /KEI/ Polycab/ Gloster/ Goldmedal/GM
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQ.xlsx
TENDER_DOCUMENT • 0.05 MB
budget.docx
TENDER_DOCUMENT • 0.01 MB
GENERAL TERMS & CONDITIONS.docx
TENDER_DOCUMENT • 0.02 MB
MANDATORY-FURNITURE WORK.docx
TENDER_DOCUMENT • 0.02 MB
NIT-57-25-26-TCs.doc
TENDER_DOCUMENT • 0.58 MB
~$99-NIT-03-24-25-TCs.doc
TENDER_DOCUMENT • 0.00 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .