REPAIR TO PLUMBING SANITARY FITTINGS AND MISC WORKS CERTAIN REPAIR TO BOUNDARY WALL SECURITY FENCING PATH AND OTHER MISC WORKS PERIODICAL SERVICES TO CERTAIN BUILDINGS AT AFS STN JODHPUR UNDER AGE BR II GE AF NO 2 JODHPUR

Amount

Disconnecting existing tanks of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site.

Disconnecting existing tanks of any description exc. 500 ltrs and n.exc. 1000 ltrs capacity and removing from site.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F in repairs 15 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 25mm bore and connections including cleaning for refixing or removing from site.

Refixing old steel tubing, 15mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 10 above shall be used under this item.

Refixing old steel tubing, 20mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 11 above shall be used under this item.

Refixing old steel tubing, 25mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 12 above shall be used under this item.

Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 25mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F in repairs 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

S&F in repairs 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

S&F in repair sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs internal flushing cistern kit, washer, flushing handles etc.

S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms)

S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).

S&F in repairs cast iron nahani trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).

S&F in repairs 75 mm bore cast iron bend (any radius) with duck’s foot or heel rest with oval access door.

S&F in repairs cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe.

S&F in repairs cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note-Quoted rate shall be deemed to be include for cutting holes /demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F aluminium handles, cast type, anodized, of size 100mm.

M&L in repair for vitrous china urinal flat back bowl type complete including including providing and fixing plug size 465X355X265 mm white (minimum) with grating and union for discharge pipe All as spfd.

S&F for 100 mm long butt hinges, medium weight stainless steel .

Taking down and refixing of Plate rack after plastering and other work all as specifed and as directed

S&F for 3mm figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane

S&F for 100 mm long butt hinges, medium weight stainless steel

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each.

S&F in repairs lid for polyethylele water storage tank exc. 500 litres and n. Exc 1000 litres including fixing PTMT nut/binding wire complete all as specified and directed

M&L for Clear air lock from tank to kitchen,bath,wc and WHB by opening GI pipe/nipple,elbow,socket,union and other possible way etc each all as directed by Engineer-in-Charge.

S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink, complete all as specified.

M&L for repairs to leakage in existing 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in existing 20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in existing 25 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

S&F in repair for center hole basin mixer.

M&L for repairs to leakage of any type by providing M-Seal all as directed by Engineer-in-Charge.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, concrete in sunken floor above ground floors) including roof treatment and removing from site all as specified and directed.

Wire brushing and cleaning top surfaces of tarrace or cement concrete includingflashing and junction of parapets

M&L15 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately

M/L for cement concrete B-0. 1:2:4 (12.5mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 40 mm in slop 1:40 over roof

M/L APP modified membrane minium weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

Supply only integral water proofing compound ISI marked

M&L for one coat of applied cold bituminous primer @ 1.2 kg/Sqm shall be applied on plastered surfaces including side wall all as specified and directed.

S&F in repairs brass chromium plated health faucet of 15 mm bore complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 150/200/75 mm dia

S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls.

S&F 100 mm bore CI vent cowl.

S&F in repairs for twin flush plastic cistern made of High Quality efficient flushing mechanical inlet valve functions with capacity of 10 ltrs all as per directed by Engr-in-Charge.

S&F in repair for Pillar cock. all as per directed by Engr-in-Charge

S&F in repair for Bib cock with flange all as per directed by Engr-in-Charge .

S&F in repair for 4" shower with 225mm Arm & Flange all as per directed by Engr-in-Charge.

S&F in repair for repalcement of dual flow water saving aerator to tap , shower and health faucet all as per directed by Engr-in-Charge.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in Sub base and finishing the top surface of concrete fair and even without busing extra cement complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber moulds/rubrised type with scratch proof lacquer coating on top surface with gray cement and pigment.

M&L for pre polished chemically treated rubber moulded chequered cement concrete coloured tiles 30cm x30cm x 20 to 25mm thick set, jointed and pointed with grey cement and pigments in neat cement slurry laid over 20mm thick screed bed in CM 1:6. in floors and path complete all as specified and as directed.

M&L for Pre-cast cement concrete factory made kerb stone with 1:3:6 type C1 (20mm graded Stone aggragate) solid blocks, exc. 10 cm in width and setting in mortar,CM 1:6 complete all as specified and directed.

M&L Preparation of new or previously untreated stone/concrete surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint of any colour/pattern, over a coat of priming paints plaster coat complete.

M&L 50mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished surface even and fair without using extra cement all as specified.

M&L Glass dividing strips, 38mm wide, 3mm thick and inserted in portion to confirm to design complete all as specified

M&L 50mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built, built in CM 1:6 complete all as specified and directed.

ditto as per item No 95 above but except stone.

Extra over items as above for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses complete all as specified and as directed.

M&L for keyed pointing, to squared rubble, coursed or uncoursed in CM 1:4 complete all as specified and as directed.

M&L cement concrete 1:2:4 type B1 (using 20mm graded stone aggragate) in bands, plinth courses, string courses, lacing courses, parapets and railings any height, kneelers, apex stones, bed plates, including necessry form work and moulds complete all as specified and as directed.

M&L for preparation of new plaster or unplastered surface of walls, applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15mm thick on fair faces of stone work in CM 1:4 finished even and smooth without using exctra cement.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work , masonry etc any section, including taking out embedded portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete

M&L for PCC (1:3:6) type C-2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.

Dismantling fencing wire mesh, of any type

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. Complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Complete all as specified and directed.

S&F coincertina coil fencing with punch tape concertina coil 900mm dia 10M openable length ( total length 90M) having 50 number rounds per 6M length up to 3M height of wall with existing angle iron Y shaped placed 2.4 M /3 mrt apart and with horizontal RBT (reinforced barbed wire), stud tied with GI staples and GI clip to retain horizontal, including necessary bolts of GI barbed wire tied to angle iron all complete as per direction of engr-in Charge with reinforced barbed tape (RBT) /spring core (2.5mm thick) wire of high tensile strength of 165Kg/Sqm with tape (.25mm thick and wt 43.478 gm/M(cost of MS angle cement concrete block shall be paid seprately

S&F mild steel screw bolts (machine made )100mm long, 12mmm dia with hexagonal or sqsuare head at one end and screw the other, or screwed bolt ends, each screw end to be fitted with washer and one hexagonal or square nut, exc 5cm but n.exc 10cm long.

M&L for mild steel screw bolts 5to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwsd the both end and to be fitted with washers and one hexagonal or square nut not exceeding 05 cm long fixed as line wire completed all as specified and as directed.

S&F plane round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Preparation of new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide.

M&L for providing and injecting chemical emulsion for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper (OBD) white or tinted including removing existing nails, if any, any Nos and filling the disturbed surface/holes making smooth surface as directed.

M&L for complete removal of existing treatment from walls and applying one coat of Birla white putty and applying two coat of oil emulsion distemper (OBD) white or tinted as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated / painted surfaces and applying one coat of cement base paint, white or tinted, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of plastic emulsion paint.

psj build solutions and company

H S Construction Co

BAGHELA CONSTRUCTION

Bansal Enterprises

JASRAJ AND COMPANY

M.A. MUNSHI AND CO.

DEV INDUSTRIES