Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹18.2 L+₹51,791.70 (2.93%)Rejected-Finance H NO 963 10 STREET NO 5 DEEP NAGAR CIVIL LINES LUDHIANA 141001 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹19.3 L+₹1.6 L (8.95%)Rejected-Finance C O CHOUDHARY 45 PEER BABA TARUSHAW ROAD HALWARA A D DISTT LUDHIANA PIN CODE 141106 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹19.5 L
EMD Value
₹39,100
Closing Date
7 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001 (Punjab)
Provn of Labour Amenity Room and Hardstanding at Dholewal under GE Ludhiana
2024_MES_649582_1
GE/LDH-05/2024-25
Open Tender
Civil Works
Item Rate
180 days
Dholewal Mil Complex
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹39,100
Yes
14 Jun 2024
8 Apr 2024
11 May 2024
8 Apr 2024
7 May 2024
23 Apr 2024
8 Apr 2024 - 22 Apr 2024
Amount
Excavating over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, exc 1.5 & n exc 3.0 m deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches n exc 1.5 mtr wide & n exc 1.5 mtr deep for foundation and getting out in soft/loose soil complete all as specified and directed.
M&L for hardcore of broken stone boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for formwork to soffits and sides of beam and lintels for rough finished surfaces of concrete flat complete all as specified and directed.
M&L for RCC(Nominal Mix) (1:2:4) using 20 mm graded crushed stone aggregate) as in lintels, Beams, cantilevers, bressumers over 1.5 m span complete all as specified.(form work & reinforcement shall be measured and paid seperately)
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.
M&L for RCC (Nominal Mix) type B-1 (1:2:4)(20mm graded crushed stone aggregates)) as in columns, pillars, piers, posts and struts complete all as specified and directed (form work and reinforcement shall be measured and paid separately)
M&L formwork to sides of rough finished surfaces concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for RCC (Nominal Mix) type B-1 (1:2:4) (20mm graded crushed stone aggregates)) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.(formwork & reinforcement shall be measured and paid seperately).
M&L for formwork to edges of concrete flats as in roof slabs exc 10 but n exc 20 cm wide suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork to soffits of suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed.
M&L for RCC (Nominal Mix, 1:2:4, (20mm graded crushed stone aggregates) as in slabs supported on walls complete all as specified and directed (Form work and reinforcement shall be measured and paid separately).
M&L for formwork to chullah hoods chajjas,troughs and similar items including edges of rough finished surfaces complete all as specified and directed.
M&L for RCC (Nominal Mix) 1:2:4, (20mm graded crushed stone aggregates) as in chajjas complete all as specified and directed (Form work and reinforcement shall be measured and paid separately).
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:4 mixed with integral water proofing compound finished even & smooth without using extra cement complete all as specified and directed (water proofing compound shall be measured and paid separately).
M&L for rendering 5mm thick on fair faces of brick or concrete surface in cement mortar 1:3 as in ceiling finished even & smooth without using extra cement complete all as specified and directed.
M&L rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this schedule).
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified.
M&L priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified
M&L for applying a two coats of water proofing paint with aluminium paint above APP based polymeric membrance complete all as specified and directed.
Supply only integral water proofing compound (ISI marked approved).
S&F for Pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, sheet thickness 1.25 mm. complete as specified and directed.
M&L for PCC 1:2:4 type of B0 using coarse aggregate of size 12.5 mm in door frames filling & hold fast etc complete all as specified and directed.
M&L for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated of second class HW rail and style and thicknes of shutter 35mm all as specified and directed (Type of wood as approved by GE).
M&L for Glazed and skeleton shutters 35 mm thick of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed (Type of wood as approved by GE).
M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.
M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm wall thickness 1.25mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1 and one shop coat of primer all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.
All as per item no 36 but with wire mesh Frame Note: wire mesh shall be measured and paid seperately
S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.
All as per item no 40 but frosted glass of 3 mm thick complete all as specified and directed.
S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed
S&F in Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed
S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.
S&F in 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixing with screw or welding to chowkhats complete all as specified and directed.
M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregates) as in sub base of floor complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-22 mm thick laid on and including screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and mirror polishing complete all as specified and directed.
All as per item 49 above but in riser of steps, skirting & dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.
M&L non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M/L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and fair complete all as specified and directed.
M&L for preparation of new plastered ceiling surfaces and applying three coats of whitewash complete all as specified and directed.
M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed .
M&L on newly plastered surface of walls applying two coats of oil bound distemper over a one coat of primer complete all as specified.
Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed by Engineer-in- charge.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed by Engineer-in- charge.
S&F wash down water closet (Pedestal pattern), complete white (including fixing bolts, seat cover) all as specified & directed by Engineer-in- charge.
S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float, flush pipe and handle and connection to pipe all as specified and directed .
S&F vitreous china wash basin white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand and including supply and fixing of waste coupling ,waste pipe 32mm bore and PVC bend all as specified and directed.
S&F Toilet paper holder stainless steel fixed to wall with SS screw all as specified and directed.
S&F Soap dish, stainless steel, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws all as specified and directed.
S&F curtain rod of 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers, finial etc complete all as specified and directed.
M&L Pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F bib taps 15 mm fancy type , chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F Rotational moulded polythylene water storage tanks 500 ltr triple layered (Cylinderical vertical with closed top cover) hoisted and fixed in position complete all as specified and directed.
S&F 20mm bore tubes medium grade galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm bore stop valve/angle valve , fancy type with chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15mm bore stop valves/angle valve, fancy type, chromium plated with long shank and cup (concealed type)cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Gun-metal, globe or gate valves of 15 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F Gun-metal, globe or gate valves of bore 20 mm with iron wheel head, screwed both ends for iron pipe and fixed
S&F 20mm bore brass ball valves, high pressure, with polythylene float and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F 110 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed.
S&F 75 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend of any radius complete all as specified and directed.
S&F PVC P-Traps for water closets of 110mm bore complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 thick in soil complete all as specified and directed.
Removal of surplus soil to a distance n exc 50 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil complete all as specified and directed.
S&F Vitreous china bowl or half stall pattern urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and directed by Enginner-in-Charge
S & F health faucet (ABS Body) mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections andfixed to in position etc complete all as specified and directed.
M& L Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L Chequered cement concrete tiles 30cmx30cmx25mm thick including screed bedding 15 mm thick in cement mortar (1:6) set and jointed in neat cemet slurry in floors with grey cement and pigments complte all as specified and directed
M &L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
M&L for 150mm bore reinforced concrete pipe NP3 lain in trenches including jointing & testing complete with collars complete all as specified & directed.
M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in bed to 150 mm bore drain pipes including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.
M&L cutting existing drain pipe in position including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 internal dia of pipe 150 mm bore etc complete all as specified & directed.
M&L for Brick work with sub class 'B' old size bricks straight or curved on plain exc 6 mtr mean radius built in cement mortar (1:4) all as specified and directed.
M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in surface channels and drains all as specified and directed.
M&L precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified and directed incliding moulds etc.
M &L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete concealed in walls/ceiling/roof/etc including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor, all as specified and as directed for the following :-
One light/fan point controlled by one, one way switch.
One switch socket outlet point 5 Amps on independent board.
One 3 Pin socket outlet , 5 Amps on the same board with other switch.
All as per item No. 97 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F- not less then 0.95, surge protection upto- 4Kv, IP20, THD shell be less then 10%, CCT- (k0)- 6500ANSI, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.
Supply and fix LED tube light fittings 600 mm, 10W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.
M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed .
Supply and fix TPN MCB DB 4 ways ,Double door with 415 Amps, Double door type complete all as specified and as directed .
Supply and fix MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-10 kA complete all as specified and as directed .
Supply and fix for SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified and directed.
S/F for MCB SPN 40 Amps 240Volts, 10kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.
S/F for SP MCB 6-32 Amps 240Volts, 10 kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.
Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed
Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.
Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.
Supply and Fix Switch Piano,Flush type single pole , one way 16 Amp complete all as specified and as directed.
Supply and Fix Socket outlet 2 in 1,3 pin,6 and 16 A piano flush type complete all as specified and as directed.
Supply and fix for exhaust fan, heavy duty 300mm sweep with louvers, 1400 RPM and connecting up including provision of copper and flexible 3 core of size 0.5 sqmm and PVC connector block complete all as specified and directed.
Supply and fix ceiling fan white colour complete with electronic type regulator and accessories 230V,1200mm sweep complete all as speified and directed.
S&F fan regulator , flush stapped type ,electronic , single phase 230 volt complete all as specified and directed.
M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.
Supply and fixing bldg security light fitting LED 35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lamp compete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core Complete all as specified and directed.
Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed .
M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and directed.
Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.
Supply & fixing for galvanised iron tubes of size 20mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.
Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 25mm bore including valve pit cahmber complete all as specified & directed.
M &L for cutting the exiting GI 40/25 mm dia taking branch connection 25mm dia including necessary GI fittings/Specials.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over and including 40mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed .
M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6 mtr mean radius in half brick thick, built in cement mortar 1:6 complete all as specified and directed.
ANUJ ABROL CONTRACTOR
PREM CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .