Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAccepted-AOC 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | L1 | Accepted-AOC lowest | |
| 2 | L2₹10.3 L+₹9,945.60 (0.97%)Rejected-AOC 218 PASCHIM DASPARA NISCHINTA PUR ROAD | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹10.4 L+₹13,148.80 (1.28%)Rejected-Finance 17 1 ABHOY HALDER LANE KOLKATA | KOLKATA | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹10.4 L+₹18,170.88 (1.77%)Rejected-Finance NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L4 | Rejected-Finance 4th lowest |
Tender Value
Refer Docs
EMD Value
₹24,000
Closing Date
27 Jul 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, Delivery and installation of 4 nos. submersible pumps motor sets with other allied works for augmentation of Kashipur w/s scheme under PMD, PHE Dte. in the District of Purulia.
2022_PHED_387703_2
07 / EE/PMD/PHED OF 2022-2023
Open Tender
MECHANICAL
Item Rate
30 days
Purulia
Please refer Tender documents.
6 documents required · 6 mandatory
₹24,000
Yes
22 Sept 2022
30 Jun 2022
29 Jul 2022
5 Jul 2022
27 Jul 2022
5 Jul 2022
Amount
PART A
Supply Delivery at site vertical bore well submersible pumping machinery directly couple with integral vertical hollow shaft submersible squirrel cage induction motor suitable for river bed tube well having power supply at 400+/- 10%, 50Hz +/- 6%, 3Ph. with Capacity: Discharge: (9-24) M3/Hr. Head: (13-40) MTR. with 3 meter lead cable RPM: 2900 rpm. 3 HP/2.2KW or eqiuvalent Material of construction Pump bowl housing: CI Pump and motor shaft: SS, Impeller:fiber, type of starter: DOL starter, Speed: 2900 rpm. ambient temperature- 50degree C ( as per IS 8034 if available in market) Make: Texmo/KSB/PLUGA [Test certificate, MOC, curve chart & warrenty certificate must be submitted at the time of delivery] (Materials should be supplied after taking approval from department.)
Installation of above submersible pumping machinery with column pipe, all all pipe fitting, submersible power cable connection and fitting. at tube well making all connection supplying nut bolt, gasket, require materials, for submersible pump motor etc. required complete in all respect rate is including hiring charge of tripod lifting arrangement, welding machine etc. as per direction of EIC.( any other item or accessories not considered in the specificaiton but required to complete the entire works shall have to be supplied and installed, No extra charges will be produced for this purpose)
Supply & delivery of 80mm dia (DN)Heavy duty U.P.V.C. column pipe, 4mm thickness with both end threaded including one socket and threaded protector with allowable hydrastatic pressure 21kg/cm2 (1.5mtr long each)
Supply and delivery of 80mm dia CIDF Non Return valve Conforming to IS:5312, Part-1 (P.N.-1.0) Make: IVC/JUPITER/KBL
Supply, delivery of at site fabricated top cover suitable for tube well made of 10mm thick MS plate with suitable hole for entry of 80mm dia column pipe and 50mm GI pipe for cable protection including supply of all 80mm dia short pieces, MS flange, Socket, Enlargers and 50mm dia all fittings short pices gi pipe , bedns enlargere MS-clamp 2nos for holding cable protecting GI pipe with tube well as per required to complete the job.
Supply and fitting at site of 1.1 KV grade 2.5 sq.mm PVC insulated 3 core copper flat submersible cable.IS-694 (Make-Finilex/Netco/Gloster/Polycab)
Supply and delivery at site 06 sq. mm, 3 core, 1.1 kv, XLPE insulated Ar. Al. conductor cable Confirming IS:7098 (part-1) 2011. (Make-Gloster/Havells/Finolex/Polycab) ( Material should be supplied as per requirement of the site no extra material will be recived by the Dept.)
Supply and Delivery of 32mm inside dia 80 Schedule (medium duty) PVC conduit pipe with fittings confirming to ASTMD 1785. ( Material should be supplied as per requirement of the site no extra material will be recived by the Dept.)
Supply and delivery of 100 mm x 40 mm MS clamp made of 5 mm thick and 24 mm width strip with nuts &bolts for holding 32 mm dia pipe as per direction and as per requirement.
Sand cutting and laying of 06 sqmm 3 core XLPE insulated Ar. AL conductor cable through PVC pipe with MS clamp after laying cable & refill the sand as per direction of EIC.
Supply and delivery at site alone front access type Kiosk panel 1.6mm thick and load bearing 2mm CRCA sheet enclosed outdoor floor mounted dust & vermin proof equivalent to IP-55 degree of protection CPRI approved , epoxy painted with all Neoprene gasket, cubical type with front lockable hinged door with FRP insulators, detachable gland plate at bottom & suitable for installation on cable trenches complete with 100Amp ¾ core cable terminal-06 nos. with necessary earthing protection, and danger marking as per direction of EIC. Make-ECE/RNR industries.
Installation of above cable Kiosk at river bed side on masonary structure (1 mtr. Length X 0.9 mtr width X 2mtr height size), (heigh above GL-1 mtr and below GL-1 mtr) with 50 mm dia electrode -2 nos earthing as per IE rule and 25 X 4 mm GI strip earhing connection with kiosk as per direction of EIC. Rate is including hire charges of generator, welding set, fuels, lubricants & Gland to complete the job as per relevant IS and as per direction of EIC.
Supply and delivery at site 06 sq. mm, 3 core, XLPE insulated unarmoured Aluminum conductor cable as (Make-Gloster/Netco/Finolex/Polycab/Havells) Per-IS-7098)Part-1)2011
Laying of cable of 04 sqmm in a underground trench in single tier formation (Horizontal) the trench size 460mm x 760mm average depth with brick protection on the top of each cable 8(eight)nos brick per mtr or as required including filling the space between the brick & cable also the trench with shifted soil leveling up and restoring surface duly rammed as per direction of EIC.
Supply, delivery and installation of 3phase DOL starter for upto 5HP submersible pump amp with ampere meter, volt meter on wall mounted angle frame with all connection for above supplied submersible pumps. (make- L&T/ABB/Havels)
Add GST @12%
AHALYA ENGINEERING WORKS
ORIENTAL ENGINEERING CO.
COMBINE ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .