Jal Jeevan Mission (JJM)-JJM- Setting up/ Up gradation of Pulikeezhu Sub District Microbiology Lab, Thiruvalla - General Civil Work

Amount

Appendix_A_ Civil Works

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

11.49.1:Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm

8.2.2.1:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.12.3:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)

OD167250/2022-2023:Fixing charges for shelves/ cabins below the granite working slab with 18 mm thick Marine ISI 710 plywood with 100% Gurjun and HDF pre laminate sheet (exterior qlty) , The rack should be fixed on a plywood frame of 0.7 m in the bottom. vertical gables/ sides made of 18 mm thick HDF double side laminated sheet of thickness 0.18 mm pressed with edge bands. The skirting with 0.1m to be provided with HDF double sided laminated sheet in the front and bottom. The shutters are to be of 0.5m W x 0.70 m H in size . inside of the cabin shall have two racks of HDF laminated sheets. The cost includes that of auto close hinges, S.S cabinet handles, Catches , screws, edge clamps , grips , adhesives etc. complete as per the direction of department staff/engineer in Charge

OD167669/2022-2023:Supply and fixing name board of Lab and officers as per the direction of departmental officers

Appendix_A_ Plumbing Works

17.11.1:Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 450x300x150 mm

OD167666/2022-2023:Supply and fitting of heavy duty premium brand jaguar/ Grohe/ Kohler / Hindware/ Roca Parryware chrome plated taps, faucets etc for sinks, wash basins, laboratory sinks etc as per the direction of engineer in charge

17.7.5:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap

17.28.2.1:Flexible pipe32 mm dia

50.18.9.12.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12 Kgf/cm2 - External work - Exposed on wall

50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Appendix C - Electrical Works

OD183712/2022-2023:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 125 Amp TP&N. Code 2.1.4

OD164362/2022-2023:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with<br>connections, testing and commissioning etc. as required.63 amps. Code 2.13.2

OD183736/2022-2023:Supplying and fixing 5amps to 32amps rating 240/415volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Triple pole and Neutral.

OD164386/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A switch Code 1.24.3

OD164390/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet. Code 1.24.5

OD168550/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A switch. Code 1.24.1

OD168555/2022-2023:Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet. Code 1.23.4

OD164529/2022-2023:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface recess including cutting the wall and making good the same in case of recessed conduit as required.25mm. Code 1.21.2

OD164531/2022-2023:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/<br>recess including cutting the wall and making good the same in case of recessed conduit as required.20mm. Code 1.21.1

OD164557/2022-2023:Supply and Installation of C 35 EXHAUST FAN Supply of 380 mm, single phase, heavy duty, exhaust fan

OD167680/2022-2023:Supply, installation of Premium branded good quality with min 1.0 Ton inverter split AC and accessories such as stabilizer, Condenser unit stand etc.with an efficient and fast cooling experience.which is durable and easy to maintain. It has a 1.0 ton capacity and comes with 3-5 star rating. The AC to process a sleep mode which reduces excessive cooling with beautiful colour suitable to ambiance . The AC has a LCD display on unit with remote operated and accompanied with a temperature LCD display gauge. The cost includes that of brand new split inverter AC, STAND, installation charges and required wiring and additional pipe arrangements etc complete as per the direction of engineer in charge

OD168549/2022-2023:Supply, installation including wiring of Premium branded with high quality batten light of 16W -20 W as per the direction of engineer in charge

OD164575/2022-2023:Supply, installation including wiring of premium branded make of wall mounting fan with 400-450 mm sweep of reputed make with high quality and minimum 1year warranty as per the direction of engineer in charge.

OD168547/2022-2023:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding<br>connection etc as required. Code 1.33

OD168548/2022-2023:Installation, testing and commissioning of LED Light of all types, complete with all accessories of branded make 12 Watt Square LED Slim Downlight (Cool Day Light)directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

OD164548/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated<br>copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5<br>sq.mm + 1x1.5 sq.mm earth wire. Code 1.7.1

OD164550/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated<br>copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5<br>sq. mm + 1 X 2.5 sq. mm earth wire. Code 1.7.2

OD168551/2022-2023:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.<br>2 x 4 sq. mm. Code 1.17.20

OD168552/2022-2023:Supplying of following sizes of FRLS PVC insulated copper conductor, 1x 6 sq.mm single core cable in the existing surface/ recessed steel/ PVC conduit as required. Code 1.17.29

OD168553/2022-2023:Supplying of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(1x 1.5 sq.mm). Code 1.17.1

OD168554/2022-2023:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Code 1.26

OD168542/2022-2023:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.2 Module (75mmX75mm) Code 1.27.1

OD168543/2022-2023:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm). Code 1.27.2

OD168544/2022-2023:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm). Code 1.27.3

OD168545/2022-2023:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm). Code 1.27.4

OD168546/2022-2023:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm). Code 1.27.5

Jijo K Mathew

SIDHARTH H

Bidder Name

Jijo K Mathew

VISHNU VIJAYAN

SIDHARTH H