SPECIAL REPAIRS TO BLDG NO P- 282/01, 02, 05 AND 06 OF (04 X OR MD ACCN) OF BDE SIG COY UNDER GE (A) VADODARA

Amount

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

Roughning of old concrete floor surface by picking, chipping and sweeping clean and washing down with water to remove dust outside to make it suitable for laying floor tile all as directed by Engr - in- Charge

M&L for non skid coloured ceramic tile 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementious grout manufactured by somani ezy grout or equivalent of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration shall be as suggested by Engineer-in-charge)

M&L for non skid colour ceramic tile 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm , as in skirting etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementious grout manufactured by somani ezy grout or equivalent of pigment matching to tile color including 10 mm thick rendering with CM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including high performence adhesive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementious grout manufactured by somani ezy grout or equivalent of pigment matching to tile color including rendering on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge).

M&L for non skid coloured ceramic joint free tile 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for 18 to 20 mm thick machine cut green marble stone in single piece in riser of steps, skirting, dado, window (Jambs/Cills), and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick backing coat / screed bed with cement mortar 1 : 4 complete all as specified

M & L for 18 to 20 mm thick machine cut green marble stone as in cooking platform and steps in single piece over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed with cement mortar 1 : 6 complete all as specified

M & L for machine cut kota stone slab, flooring 20 - 25mm thick as in floor,step, cooking plateform etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalent of pigment matching to kota stone slab color including rubbing and polishing complete including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6

M & L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalent of pigment matching to kota stone slab color including rubbing and polishing complete including backing coat 10 mm thick in CM 1:4.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M & L Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges.

Taking down cement plaster on brick/concrete surface of wall and ceiling including raking out joints hacking for key scrubbing down with water etc.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M & L for Brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M & L for brickwork with sub class ‘B’ old size bricks straight or curved to any radius in half brick thick walls built in CM 1:4

M & Lfor Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 ,r finished even and smooth (without using extra cement)

M&L for Rendering 15 mm thick on external surface in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion , finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).

M & L for Rendering 10 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:4 for finished even and smooth (without using extra cement)

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash all as specified and directed.

M & L for complete removal of old existing treatment on plastered surfaces of wall and applying three coats of white wash all as specified and directed.

M& L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M& L for complete removal of existing treatment on wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash.

M & L for preparing old plastered surfaces of ceiling and applying two coat of white wash on ceiling to match the existing surfaces.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each

Refixing of door shutter exc. 1 Sqm and n.exc. 2 Sqm each in same opening.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type veneered on both side with decorative choice laminated type 1 (factory laminated), or surface finish including 6mm thick external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated aluminium window/ventilator shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade practice.

S&F 4.00mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S & F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolt, if required hooks(stay), heavy for large gates, hook and pintol hinges, large hasps and staples, chains, hand made sliding bolts, clamps hold fasts, wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 310-O or Fe 410-O

M & L for Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed

S & F in repairs 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed

S & F 150 mm size extruded aluminium alloy handles, febricated type anodised

S & F aluminium anodised Hasp and staple, safety type of size 75 mm with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters

S & F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of enginer in Charge, Manufacturers's speciifcations.

S & F 125 mm aluminium alloy handles, cast type anodised all as specified.

S & F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed

S & F in repairs stainless steel socket fancy type for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

S & F in repairs 20mm dia brass chromium plated tubular towel rail complete.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing con- forming to Fe.290.Gde-E-165 complete

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for preparing old steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint to match the existing surfaces..

M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M & L for preparing old wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint to match the existing surfaces.

Taking up or down 15mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 16 mm internal dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc) after cleaning the old dismantled GI tubing.

Taking up or down 20mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc) after cleaning the old dismantled GI tubing.

Taking up or down 25mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Refixing old steel tubing 25 mm bore and connections in new or old position (Walls, ceiling, floors, etc) after cleaning the old dismantled GI tubing.

Dismantling cast iron pipes, jointed in cement mortar , 100 mm bore fixed on wall, floor, roof or laid in trenches.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed.

Dismantling cast iron pipes, jointed in cement mortar for 75 mm bore

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F stack clamps out of 50mm X 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed

S & F stack clamps out of 50mm X 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed

S & F 110mm PVC (SWR) vent cowl all as specified and as directed

S & F 75mm PVC (SWR) vent cowl all as specified and as directed

S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule

S & F in repair CP wall mixer three in one system for mixing hot and cold water, screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed.

S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed

S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S & F in repairs 20mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S & F 125mm dia chromium plated shower rose with swivel joints including fixing to steel pipe or GI union complete

S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe

Dismantling of water storage tank of 500 ltrs to 1000 ltrs capacity.

Disconnecting existing tanks of 250 lts to 500 ltrs capacity, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re fixing in position. Cleaning and removing of all scale and dirt etc from tanks and from mouths of circulating pipes etc. including all necessary fittings if required complete all as specified and as direct

S & F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed

S&F in repairs vitreous China squatting pan of Orissa pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including P or S trap etc and provision of lime concrete bedding complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed.

S&F plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed.

S & F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete all as directed.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete all as specified.

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.

S&F in repair vitreous china Wash hand basin, white , flat back size 450x300 mm except taps, CP waste coupling but incl brackets all as specified. Make cera/Hindware

S&F 15mm bore pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed

S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. Make : Prayag or equivalant.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

Supply & Fix stainless steel wall mounted plate rack of size 880x880X 220 mm and thickness of sheet not less than 0.50mm with provn for keeping plates and other crockery fixed with screw and rawal plug etc on wall complete all as specified and as directed

M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge

M&L for Providing precast cement concrete Type B1, 1:2::4 (using 20 mm Aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchcomplete all as specified and directed. (reinforcement shall be measured and paid separately)

M&L for Providing reinforced cement concrete (nominal mix) Type B1, 1:2:4 (using 20 mm Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, Chajjas and the like including necessary form work complete all as specified and directed. Note. (reinforcement shall be measured and paid separately)

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifed and as directed.

Complete removal of existing unservicable roof treatment of any type incl taking down plaster, padding of any description , cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land. and all as specified and directed

M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions over roof for laying of WPT all as specified and directed. (WPC will be measured and paid separately).

M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minimum 3.50 Kg/Sqm 3 mm thick (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M & L for brushing with neat cement slurry @ 3Kg/Sqm

Supply only Integral water proofing compound (Liquid type) all as specified and directed.

M&L for sunken treatment of WC/Bath with polymeric membrance (APP based) with non woven polyster mat as reinforcement including water tightness test with filling of water for continuous 48 hours as under :-

Demolition of existing PCC/lean concrete including floor tiles and removing rubbish off the premises.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound as per manufacturers instruction and should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying APP based polymeric membrance of weight of 3.5 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions complete all as specified and as directed.

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

M & L for 25 mm thick cement concrete in flooring type B0, 1:2:4 (12.5mm graded aggregate) with water proofing compound as per manufacturers instructions for laying floor tiles. Note (WPC will be measured and paid separately).

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixtures such as switches sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-

One light point controlled by one switch.

One ceiling fan point controlled by one switch and fan regulator.

One exhaust fan point controlled by one switch.

One bell point controlled by one bell push

One 3 pin socket outlet 5 Amps independent board.

One 3 pin socket outlet 5 Amps on the same board with other switch.

One light point controlled by two two way switches.

All as per item No. 126 here-in before but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.

S & F switch piano flush type SP one way 6 Amp.

S & F switch piano flush type SP Two way 6 Amp.

S & F for Bell push, flush type, 5 amp

S & F for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F for switch socket combination 2 in in 1, 5 A flush type.

S & F for Socket outlet 2 in 1 , 3 pin, 6 Amps flush type.

S & F ceiling rose surface polycarbonate body three terminal.

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings including LED lamp 9 watt, Retrofit complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the laminated sheet complete.

S & F of ceiling fan complete with blades, down rod from existing roof / trus to fall ceiling, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard .

S & F for Bell, AC, 230 volts, single pole complete all as specified and directed

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection pipe etc complete all as specified and directed

Supply and fix of LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering Steel complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300mm including cutting of suitable size holes on existing wall and making good disturbed work to match the existing surfaces and exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in Charge.

Supply and fix Exhaust Fan Plastic body 250mm size single phase 1200 RPM max air 1710 M3/Hr free delivery 1000 sound level 50-55 complete with louvers

Sub main wiring with FRLSTwo single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694 marked, of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.including taking down existing insmen wiring Note : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S & F MCB DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete all as directed by Engr-incharge including taking down existing DB.

S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed

S & F incl connecting MCB single pole, having rupturing capacity 10KA, 6 amps to 32 amps as ordered 240 Volts

S & F MCB Single pole and neutral (SPN), having rupturing capacity 10KA, 240 V 63 amps as ordered.

S & F MCB Triple pole and neutral (TPN), having rupturing capacity 10KA, 240 V 63 amps as ordered.

Supply and fix Electronic meter ,Tamper Proof,LCD display, with polycarbonate cover 230 volts, 10-60 Amp, Accuracy Class 1 50 Hz, conforming to IS-13779, IP 54 , with parameters to show data, time,current reading, load,PF, voltage and kWH complete including PVC transparent suitable size meter box including taking down old unserviceable meter complete all as specified and as directed.

S & F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed

Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including necessary excavation and earthwork in any earth strata and testing on completion

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/taking out/laying of cables/stay/strut etc for shafts, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete

Removing excavated material (soil) at a distance n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning filling in excavated approved soil including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil completed all as specified and directed

Supply and laying in repair 50 mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc laid in trenches complete all as specified.

Supply and laying in repair 20 mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc in trenches complete all as specified.

Supply and laying in repair 15 mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc in trenches complete all as specified.

S & F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S&F Bib taps, 15 mm bore cast copper alloy chromium plated, Fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and

M & L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc up to 50 mm dia

Supply and laying dry fine sand of best available quality as sand cushioning to UG cable punned as specified complete all as specified and directed. Note :-Punned thickness shall be measured and paid.

M & L for Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks as protection cover of cable laid, complete all as specified and directed.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVCtape armouredwith galvanised steel wire or tape and overall PVC sheathed 25 sq. mm 4 Core nominal cross section in service connections .

M&L for galvanized steel tubing light Grade of 40 mm dia as protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Badri Electricals

Chanda Construction Co.

Dagli Engineers