REPAIR TO JOINERY ROOF TREATMENT FLOORING PLASTERING PLUMBING SANITARY AND DRAINS TO MD AND OTM ACCN AT ALHILAL MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.

M&L 2nd class hard wood, plain solid,straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put to gether with glue pinned at joints as specified and directed

S&F pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F rolled mild steel bands,straps,supports or stays for rainwater,ventilating pipes,including bolts,if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified & directed.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded creshed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

M&L prepartion of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,complete with glazing bars including applying one shop coat of red oxide primer complete all as specified and directed

S&F factory made steel window with side hung shutter including Box type hinges with steel handle, steel peg stay, without glazing bars including applying one shop coat of red oxide primer complete all as specified and directed

M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 200 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair well seasoned 2nd class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and windew stops and the like including all necessary labours articles n.exc 200 Cu.cm each complete all as specified and as directed

S&F 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F in repairs,150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs, stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills,gratings,etc,with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars;barred iron doors;ladders ;framed balusters;walk ways;railings;framedwork of water tanks andsimilar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

S&F Powder coated Anodised aluminium window and ventilator shutters (minmium thickness of powder coating 50 micron), weight of aluminium section not less than 0.914 kg/m for style and rail, weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays one number,hinges type B-21, 100 mm long two numbers,suitable handle one number on each shutter complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters (minmium thickness of powder coating 50 micron), aluminium section of bottom rail 114.50x44.45mm, middle and top rail 85x44.45mm, style 85x44.45 mm and thickness of section not less than 3mm , weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane including solar control film 25 micron reflective type (gareware sun control or equivalent) sticked to glass panes complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 18/19 mm thick plywood, grade BWR, type BB fixed with screws for shelves, cupboards etc, to timber frame work or ply wood including 3mm thick teak wood lapping on edge, complete all as specified and directed.

M & L 1.50 mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L Ist class hard wood bull-nosed,splayed, chamfered or rounded on one edge or face sectional area n.exc 3 Sqcm, fixed with screw complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete as specified and directed.

S&F 25mm thick, second class hard wood boarding clean sawn, planed both side with butt joints and fixed with nails in any situation as in cupboard shelfs, etc complete as specified and directed.

Dismantling of wall & celling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work 605mm x 605mm for false ceiling including hangers 6mm dia GI(upto1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. flat iron of size 40mm X 3 mm, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

M&L Second class hard wood timber in scantlings, clean sawn, fixed complete as specified and directed.

M&L 4mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling, flat or sloping complete as specified and directed.

M&L second class hard wood, bull-nosed,splayed, chamfered or rounded on one edge or face sectional area exc 3 Sq.cm but not exc 6 sq.cm, fixed with screw complete all as specified and directed.

M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, not exc 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

M&L preparation new surfaces of AC sheet as in ceiling and and applying two coats of oil bound distemper of approved tint over and including a coat of primer complete as specified and directed.

M&L 12mm thick perforated particle board/tiles for insulation and accoustic purposes,60x60cm in size fixed to aluminium snap grid false ceiling complete all as specified and as directed.

Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F 0.71mm thick,plain colour aluminium sheeting,Alloy 31000H4 as in door shutters, ridges, valley gutter,drip and straight flashing (length and girth as fixed) etc. icluding down old rested one complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.

S&F Steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L complete removal of roof treatment including APP membrane,PCC podding,plastering,brick bat etc coplete, complete all as specified and directed.

M&L preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by copressed air by compressor coplete, complete all as specified and directed.

M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and platering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method coplete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.

M&L 15mm thick rendering on fair faces of concrete surface of chajja CM 1:3 mixed with liquid water proofing compound and finished the surfaces even and smooth without using extra cement including taking down paster of chajja complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L 40mm thick plain cement concrete, M-15 (Nominal Mix), type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding over APP etc using water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 but n. exc. 500 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt,etc,from tanks and from moulds of circulating pipe,etc complete all as specified and directed

Disconnecting existing tanks of capacity exc. 500 but n. exc. 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt,etc,from tanks and from moulds of circulating pipe,etc complete all as specified and directed

Dismantling old unserviceable water tanks of any type capacity exc. 250 and n. exc. 500 ltr capacity and removing from site, complete all as specified and directed.

Dismantling old unserviceable water tanks of any type capacity exc. 500 and n. exc 1000 ltrs capacity and removing from site, complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L rendering 15mm thick plaster in cement mortar(1:4) mixed with WPC as per manufacturer's instructions on stone masonry wall surfaces or fair faces of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L rendering 15mm thick plaster in cement mortar(1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion of approved tint over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces, complete all as specified and directed.

M&L peparation of old plastered or unplastered surfaces of walls by complete removing the existing treatment and applying two coats of distemper oil emulsion of approved tint over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces, complete all as specified and directed.

M&L prepartion of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L preparing old plastered surfaces of walls by brooming down or steel wire brushing,scraping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing, complete all as specified and directed.

Taking up or down 25mm bore steel water tubing and connections including cleaning for refixing, complete all as specified and directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed tubing) complete all as specified and directed. Note:- The cost for cutting chases in walls,floors,etc and their making good for concealed pipe work included in this item.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed tubing) complete all as specified and directed. Note:- The cost for cutting chases in walls,floors,etc and their making good for concealed pipe work included in this item.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed tubing) complete all as specified and directed. Note:- The cost for cutting chases in walls,floors,etc and their making good for concealed pipe work included in this item.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins,arches,pillars,etc but excluding ashlar facing,dressed stone work precast concete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

M&L walling of random rubble, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling(Granite or trap stone) for hammer dressing with maximum depression on face from a straight edge held against the dressed surface n exc exceeding 20mm and dressing to face beds and joints as specified of random rubble walling uncoarsed or brought upto coarsecomplete all as specified and directed.

M&L raised pointing to random rubble stone masonry,uncoursed or brought upto course in cement mortar 1:3 complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in mass concrete complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

Add or deduct for each 25 mm girth or part there of over or under 30cm dirth, complete all as specified and directed.

M&L plain cement concrete,1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

M&L rendering 15mm thick plaster in cement mortar(1:4) on fair faces of brick work or concete surfaces, finished even and smooth without suing extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L reinforced concrete pipes, 300mm bore class NP-2, laid and jointed complete with collars complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L pre-cast cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in landings, cover slabs for man holes and similar articles, set in CM 1:6 complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding or backing coat, removing rubbish off the premises, removal and depositing where directed and leaving the work clear of any plastering complete all as specified and directed .

M&L joint free (edge cut) coloured glazed ceramic tiles in vertical surfaces 300 x 450x 7mm/ 300 x 600 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Non-skid, joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) 25mm thick as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paverblock/ path etc finishing the surface even & fair whtiout using extra cement complete all as specified and directed.

M&L out door heavy duty full body vitrified tiles of any shade (as approved by GE) 600x600x15mm fixed with spacers over 6mm thick high polymer modified grey cement based tiles adhesive and grouted epoxy grout over and including 15mm screed in cement mortar 1:4, complete all as specified and directed.

Dismantling of stone slabs, paver blocks and tiles of any description or thickness in floors,path apron etc laid dry or laid dry and pointed surface complete all as specified and directed.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .

M&L 75 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.

S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20 mm bore iron pipe or for union complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan semi-pedestal pattern (Anglo Indian type) white with seal and cover including connection to 'P' or 'S' trap and flush pipe etc and making good disturbed surfaces of floor and match with existing including taking down the existing old one complete all as specified and directed.

S&F vitreous china squatling pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap,setting trap and pan in lime concrete and jointing to flush pipe (fixed in repair) and making good distrubed surfaces of floor and match with existing follor, complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F vitreous china, wash basin flat back, with pedeatral white of size 550mm x 400mm including brass Chromium Plated waste coupling 32mm size with long screwed shank and fly nuts, flange end bedded in red lead cement,PVC medium grade 32mm size waste pipe, PVC connection 15mm size, 450mm long with PTMT nuts at both ends (fixed in repair), complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

S&F in repairs soap dish vitreous china white,approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L 300x300x10 mm endura cool roof SRI tiles (light shade as approved by GE) fixed with spacers over 3 mm thick high polymer modified gray cement based tiles adhesive and grouted with epoxy grout complete all as specified and directed.(SRI value greater than 78)

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed .

VIVEKA ENTERPRISES

Jindal Mangla Builders

BHARDWAJ BUILDERS

M/S R S Kaushal

S R CONSTRUCTION

M/S DOGRA CONSTRUCTION CO

M/S THAKUR ENTERPRISES