Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹42.6 L+₹1.7 L (4.06%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹50.5 L+₹9.5 L (23.3%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO BLDG NO P 826 JCO SINGLE LIVING OF ZONE WKSP AND BLDG NO. P 772 JCO SINGLE LIVING OF HQ SQN ARMD BDE OTHER SANCTIONED WORK IN THE AREA OF AGE B R II UNDER GE ARMY CENTRAL JODHPUR
2022_MES_546177_1
GE/J/A OF 2022-23 (9128/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹98,000
29 Sept 2022
18 Aug 2022
22 Sept 2022
18 Aug 2022
19 Sept 2022
1 Sept 2022
Amount
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Replacement/Renewal" unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are requested to quote their rates accordingly.
Demolition of cement concrete in ground floors and pavings not exc. 15 cm thickness, below or above ground level) and removing debris out of MD land, complete all as specified and as directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate), finished surface even & to receive floor finishes etc complete all as specified and as directed.
M&L for 15-18mm thick machine cut, Udaipur green marble, (size & shape, shade and pattern as approved by GE) as in cooking platform including & over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and as directed..
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.
M&L for non skid / matt finish ceramic colour tiles (premium quality) of size 400 mm x 400 mm x 6-7 mm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles including & over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.
M&L for 15 mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.
M&L for non skid / matt finish ceramic colour tiles (premium quality) of size 400 mm x 400 mm x 6-7 mm, as in verticle surface such as dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles including & over 10 mm thick backing coat in cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.
M&L for rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete
Racking out joints/pointing to square rubble masonry, Jodhpur type, regular coursed built in cement mortar, complete all as specified and as directed.
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.
M&L for preparing new plastered or unplastered surfaces and applying two coats of wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
M&L for three coats of white wash on newly plastered surface of wall including preparation of surfaces, complete all as specified and as directed.
M&L for three coats of white wash on newly plastered surface of ceiling, including preparation of surfaces, complete all as specified and as directed.
M&L for one coat of white wash including preparation of old surfaces as on ceilings all as specified and as directed.
M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint of approved quality & tint, over & including one coat of chalk white, complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in bed block for hold fast including necessary form work, complete all as specified and as directed by Engr-in-Charge.
Taking down of steel window and ventilators, carefully, complete all as directed by Engr-in-Charge.
S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed by Engr-in-Charge.
S&F rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors; chowkhat, doors with MS sheet, ladders ;framed balusters walk ways railings framed work of water tanks and similar work conforming to Fe-290Gde E-165 complete all as specified & directed by Engineer-in-charge
S&F galvanised iron steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks or GI staples & necessary fitting on steel/ wooden surface, complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.
S&F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and as directed by Engr-in-Charge.
S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm double action spring hinge, brass with phosphorus bronze wire spring bright polished, complete all as specified and as directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed by Engr-in-Charge.
S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square not exc 0.50sqm in each pane, complete all as specified and as directed by Engr-in-Charge.
S&F of 4mm thick pin-headed figured glass panes of size not exc 0.5 Sqm fixed with oil putty, complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and as directed.
M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Taking up or down GI steel /CPVC water tubing 15 mm bore and connection, including cleaning for refixing or remove to site.
Taking up or down GI tubing/CPVC 20/25 mm bore and connection, including cleaning for refixing or remove to site.
S&F 15 mm bore GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid in floors, complete all as specified and as directed.
S&F 20 mm bore GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid in floors, complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as directed by Engr-in-Charge.
S&F in replacement bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ORP-10037PM or its equivalent model in Kohler/ Cera as approved by GE.
S & F in replacement over head shower rose 150X150mm square shape single flow ,body and face plate brass with CP, arm 300mm long joiting to 15 mm bore pipe complete all as specified and as directed. Make : Jaquar Cat No. OHS-1757 or equivalent in Kohler/ Cera as approved by GE
S & F in repair CP central hole basin mixer with regular spout with out popup waste system with 450mm long braided hose with connecting legs and wall flanges complete all as specified and as directed. Make : Model No.QQT- 7167B of JAQUAR make or equivalent model in Cera / Kohler as approved by GE.
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.
S&F in replacement stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed, (ISI Marked) suitable for 20/25mm bore, complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE.
S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. ALI-85001 or its equivalen model in equivalent in Kohler/ Cera as approved by GE.
M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.
S&F single towel rail 600mm long fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Kohler/ Cera as approved by GE.
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (as approved by GE).
M&L for 7.5cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement Vitreous China wash basin, (Ivory / Superior colors), Oval type (Under counter basin) size not less than 500x385x150mm size as per trade pattern, fixed to stone slabs, complete including CP waste coupling & flexible waste pipe and CP, fancy type, cast copper alloy pillar tap, complete all as specified & directed by Engg.in-charge. Make:-Cera Cat. No. S2030104 or equivalent model in Hindware / Parryware as approved by GE
S & F in repacement superior class vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap, flush pipe of 32mm dia HDPE pipe etc., complete all as specified and as directed. Make:- Cera Cat No. CABLE S3020105 (Ivory) or equivalent in Hindware / Parryware as approved by GE
Dismantling of cast iron of CI drain pipe/PVC (SWR) pipe jointed in cement mortor of size 110/100mm bore as directed
Dismantling of cast iron of CI drain pipe / PVC (SWR) pipe jointed in cement mortor of size 75mm bore as directed
S&F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .
S&F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .
S&F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls with MS clamps of suitable size complete all as specified and as directed .
S& F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls with MS clamps of suitable size complete all as specified and as directed .
S&F 75 mm bore (SWR) PVC bend any radius with oval access door complete all as specified and as directed.
S&F 110 mm bore (SWR) PVC bend any radius with oval access door complete all as specified and as directed.
S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.
S&F 9/10 ltrs capacity PVC valve less(Super special colors), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed. Make:- Cera cat. No. B1010102 CIENA PREMIUM or its equivalent model in Parryware / Jhonson as approved by GE
S&F in replacement 15mm bore PVC connection pipe (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed.
M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, complete all as specified and directed.
Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE, overall thickness not exceeding 200 mm, including demolition of existing cement concrete, taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removal of demolished/unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.
M&L for roof treatement in the following stages :- (a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified . (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof treatment work, over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed by Engineer-in-charge.
Dismantling existing water tank of capacity exc 500ltrs and not exc 1000 ltrs and removing from site, complete all as directed by Engr-in-Charge.
S&F in replacement 1000 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed by Engg.-in-charge. Make:- Sintex / Rotex as approved by GE
Supply only integral water proofing compound (ISI marked).
Demolition of brick work/stone masonary built in cement mortar including all quoins, pillars, etc., removal of unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.
M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.
Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.
M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete, in walls all as directed.
M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match.
M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate, as in sub base of floor/hard standing, incld. compaction properly & universal and laid to level, complete all as specified and directed by Engineer-in-charge.
S&F machine pressed, factory made, Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with gray cement & pigment, including & over 15 mm thick screed bed in CM 1:4, complete all as specified and as directed by Engr-in-Charge.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed by Engr-in-Charge.
M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning the existing reinforcement of slabs, chajjas etc., & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed by Engr-in-Charge.
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed by Engr-in-Charge.
M&L for 15-20 mm thick rendering in CM 1:1:2 (using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand) over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed by Engr-in-Charge.
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed by Engr-in-Charge.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed by Engr-in-Charge.
S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed by Engr-in-Charge.
S&F Soap Dish, viterous china white, approximate size 160 x 160 x 90 mm, fixed with CP brass screws, complete all as specified and as directed by Engr-in-Charge. Make : Cera / Hindware / Parryware as approved by GE
Demiolition of reinforced cement concrete of staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as specified and as directed by Engr-in-Charge.
Use and waste of formwork to sides and soffits of slabs not exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and as directed.
Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.
M&L RCC, M-25, design mix as in slab supported on wall, roof slab, chajja and in shelve etc., complete all as specified and as directed by Engr-in-Charge.
M&L RCC, M-25, design mix as in beam, cantilevers, bressummers, lintel overone meter span, complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bar 5 mm dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed .
M&L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and as directed by Engr-in-Charge.
Supply & laying jointing and testing 150mm bore reinforced concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and as directed.
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested, suitable for 150 mm bore pipe, complete all as specified and as directed.
Returning filling in excavated soil, including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.50 mtr above the starting point, complete all as specified and as directed.
S&F factory made flush shutter 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed.
S&F of 35mm thick factory made 2nd Class hard wood partly glazed and partly skeleton shutter, open rebated and prepared to receive glass or wire gauze etc., edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a), complete all as specified and as directed.
Demolition of sunken floor wc/bath/kitchen and applying 15 mm thick plastering in CM 1:3 of internal surface with prime coat than painting with bitumen 30/40 over a coat of bitumen primer & putting 50 micron polythene, than filling PCC 1:5:10, type E-1 (using 40mm graded stone aggregate) and inserting 32 mm bore LDPE pipe, complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in filling under pressed steel door frame & hold fast iron fixing including necessary form work, complete all as specified and as directed.
S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hip ties for roof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.
S & F floor door stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
S&F PVC door seal as per approved sample (best quality) fixed at door to cover the gap between floor and door complete all as specified and as directed.
Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MD land, complete all as specified and as directed by Engr-in-Charge.
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed by Engr-in-Charge.
M&L for Dark shade, double charged, Vitrified Ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, including & over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson as approved by GE.
M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over one coat of primer all as specified.
M&L for preparation of old stone / concrete walls surfaces and applying one coat of cement based paint, complete all as specified and as directed by Engr-in-Charge.
Taking down shutters of any description area exc. 1.00 Sqm and not exc. 2.00 Sqm each, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement of galvanised iron steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm with tinned tacks or GI staples & necessary fitting on steel/ wooden surface, complete all as specified and as directed.
S&F of aluminium anodized,tower bolt extruded section of size 200 mm long, complete all as specified and as directed.
S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified and as directed.
Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth including & over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.
Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitte, as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work, complete all as directed by Engr-in-charge.
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concerete complete all as specified and as directed.
M &L for Framed work as in door or gates of angle ,MS hollow pipes, solid SQ sections Flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheetingas required to br prepared for hanging or sliding with and including MS Channel as posts & hold fasts & suitable arrangements for locking etc complete all as specified & directed conforming to Fe 290.Gde E165, complete all as directed by Engr-in-charge.
All as per item No. 132.00 above but (fancy type article) for ornamental and intricate design, complete all as directed by Engr-in-charge.
M&L for Kicking Iron plates, any size, of galvanised iron sheet 1mm thick, fixed with galvanised screws in iron gate, complete all as directed by Engr-in-charge.
E/M ITEMS Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.
M&L point wiring using approved colour coding as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty non metallic PVC rigid conduit of 20mm dia with accessories concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/ prestressed steel sunken / concealed box (with earth dolly) with 3 mm thick plastic laminated sheet (ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & unsheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and as directed.
All as per serial Item No.136.00 above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches complete all as specified and as directed.
All as per serial Item No.136.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and as directed.
All as per serial Item No.136.00 above but for 16 Amps 6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 2.50 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
All as per serial Item No.136.00 above but for 16 Amps 6 pin socket point on same board with 2.50 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 2.50 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
All as per serial Item No.136.00 above but for 16 Amps 6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 4.00 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 5 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 15 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F lamp holder insulated body polycarbonate type with back plate WITH 9W LED BULB, complete all as specified and as directed by Engr-in-Charge.
S&F socket outlet, flush type, single pole, 2 in 1, 3 Pin, 5/6 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 6 Pin, 5/15 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down old u/s material complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.
S&F in replacement of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, including taking down old u/s material complete all as specified and as directed.
S&F connecting, and commissioning of street light fitting 45 watt LED , IP-65 protection, single piece pressure dia cast aluminium alloy housing high immpact 4 mm thick heat resistant toughned clear glass cover for lamp and matrix of LEDs in built electronic driver upto 4 KV surge protection device and setting& input power 35 W system lumens 85/W operating voltage 160-260 V contror gear compartment with high voltage, Prewired including 1.20 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified Make : Philips/ Bajaj/ Havells
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
S&F Electronic fan regulator, 120W, Piano type, 2 module and connecting electrically, ISI Marked, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement of ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) connecting up with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan (earth wire to connected to fan hook), ISI marked, complete all as per directed and specifed Make :- Havells/Orient/Usha.
S&F in replacement of exhaust fan, heavy duty steel body, AC single phase 250 mm sweep complete with louvers including cutting / making holes in wall fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg.-in-charge. Make : Havells/ Bajaj/ USHA
Sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade, as per IS code 694 with valid CML No. & ISI Marked, of size 6.00 Sqmm and one run of 6.00 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in existing PVC/steel conduit , (ISI marked) surface mounted/concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 6.00 sqmm cable with one run of 6.00 sqmm cable as earth wire shall be measured & paid for as one length.
S&F in replacement of Prewired distribution board (sheet metal enclosures) SPN 8 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, including taking down old u/s material, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F in replacement, MCB single pole 240 volts rating from 5 to 30 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F in replacement, MCB SPN 240 volts rating from 40 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
M&L in repairs for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron earth lead wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
M&L for disconnection and taking down and transporting of ceiling fan / exhaust fan any sweep from any location inside Army area to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location including making good disturbed surface including testing etc complete all as specified and as directed . Note : - (i)- Complaint slip regarding this job shall be obtained from concerned JE E/M of AGE E/M office every day and also intimated to concerned JE E/M after satisfactory completion of rectification work. (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor, stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 3.5 Core 70 Sqmm nominal cross section in service connections, in replacement, including taking down old u/s cable, complete all as specified and as directed.
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A to 160A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider Note : MCCB & MCB shall be measured and paid for separately.
S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75%, 25 kA, 415V, 125 Amp, 4 Pole with over load and short circuit protection, suiatble for item No.161.00, (ISI marked), as in replacement, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., (ISI marked), as in replacement, complete all as specified and as directed by Engg.-in-charge. Make: Jaquar/Havells/Venus
S&F for in replacement of sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade, as per IS code 694 with valid CML No. & ISI Marked, of size 6.00 Sqmm and one run of 6.00 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 6.00 sqmm cable with one run of 6.00 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.
Taking down and refixing / Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed.
S&F in replacement sheet metal enclosures comprising 2 pin earth plug socket, MCB SP 20 Amps (C-curve-10 KA) complete all as specified and as directed.
S&F in replacement, MCB SPN 240 volts rating from 63 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply ,connecting and testing of post top 40W LED coral ( OPAL), IP 65 protection ,energy saving, environmental friendly, long life, aesthetically designed with symmetrical light distribution, warm white spun aluminium landscape luminaire with high power LED's as light source with three core flexible copper conductor cable of suitable size including taking down unserviceable light fitting complete all as specified and as directed. Make : Philips / Baja / CG
S&F 2 Module Plastic enclosure for outdoor operation including necessary connection lugging with copper lugd pin/ring type, complete all as specified and as directed.
S&F in replacement, MCB SPN 240 volts rating from 10 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor, stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 Core 4 Sqmm nominal cross section in service connections, as in replacement, including taking down old u/s cable, complete all as specified and as directed.
NOTE:- (i)- Quantities of Sanction Job's are clubbed in this BOQ. Breakdown of qty is given in the Annexure-I on Sl. Page No. 46 to 49 of Tender Document. Therefore, the work and its measurement should be completed keeping in view the Annexure-I. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/s Ajay kumar Garge
ABHOG INFRASTRUCTURE PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .